Funny story About A Freq Generator. when I was In HS Our Horticulture teacher was an Old Navy Radioman. He was really Cool. and he knew I was into electronics so he surprised me by bringing in some old electronics equipment. one piece was a signal Generator exactly like you showed in the vid. he trusted me to stay in his classroom [ Holding down the Fort ] with the door locked, while he was having lunch. he let another student that was heavy into electronics hang out in his classroom during lunch one day. Our school bell was an oscillator generated Horn sound. and while me and this other dude were messing around with the Freq Gen.I found a freq. that sounded exactly like the horn bell. it was the lowest scale Sign-wave Forget what the exact Hz rate was tho.. . maybe 70 Hz or So. I noticed that the school Maint. had added a siren horn inside the classroom Up on the wall. under a partitioned Study table. well it was hooked up with wire nuts so we got up on the table, Ran the output up to the Out going speaker connections, and turned the thing all the way up ( The output was Loud without An amp even ) and did a count down. flipped the output switch On and timed it so it was as long a duration as the horn sound. there was a transom window over the door and we saw the campus cops walking around, and we cracked open the door and heard one saying to the other " I don't know where it came from! " this other Dude and I got a Real chuckle out of Pulling one over on the Campus Cops. That Prank Went down In BHS History. LOL
Think ive seen this guy in "Back to the future"? Anyway nice video. Also some precautions to think of for ppl that didn't know... When salvaging old stuff (well new ones as well but not as bad) wash your hands after, the flame retardants used is not good for you as they act like hormones and mess with your body. When salvaging things pre 1980~ or medical/military equipment, look out for beryllium containing components. Like ceramic insulators. Ceramic resistors and such. Do not salvage magnetrons and its not worth the risk. Old computer screens (fat ones) contain allot of lead so try not to break them (for fun). The lead is there to protect users from roentgen rays as the screen uses high voltage which generates them (When on ofc).
Hobby Electronics Very sensible remarks. Would like to add: Always use gloves and make sure there is proper ventilation when working with electronics (take a look at the guys hands, you'll know enough...)
The bulb in the oscillator is used as a variable resistor to keep the gain linear. If the feedback signal gets large enough, the signal stops being a sine wave and becomes a square wave. As more voltage gets generated, the filament heats up and its resistance increases.
As a kid salvaging and learning, a trick I learned was to take a propane torch and wave it over the backside of the board. As soon as the solder appears to soften or change color, give the board a rap on the table. Solder and parts fall out nicely. You could depopulate a board in a matter of minutes.
That stereo you said has a bad transformer. Easy fix. Tear open the wrapping around the coil windings along the primary side. There is a little thermal fuse inline with the wires coming from the primary connections. They get old and fail. Replace it or eliminate it and the transformer is back in business. The thermal fuse is too weak to survive a loud party for hours on a weekend in those units. I would salvage the power amplifier from that with the power supply. Its a robust amp that can be driven directly from computer TV or other source or to use as a bench test stereo amplifier to listen to small signals without all the other junk. Good job on the video :)
Thanks for showing! You are one of the few people left that manually does things, like I do. Everyone now needs clean hands with their eye telephone. I Love using my brains and unfortunately its getting lost for good more each day. Great thanks again.
Seriously, there is a special charm about electronics designed and manufactured in the late 70's and early 80's. You can find hundreds of useful salvaged parts from an old radio from the 80's
Yep, it's a form of negative feedback, when the there is too much signal going through the lightbulb it heats up and resistance increases, lowering the signal amplitude
I'm not too knowledgeable when it comes to this stuff, but I breathed a sigh of relief when you decided not to break down that milliammeter. That device was beautiful. Thanks for this. 😀
When I was 16 (1991), I used to sit at my table in a quiet room and desolder components EXACTLY as you have just shown for HOURS - burning my bare fingertips and/or using a small terminal screwdriver :D - I used to make FM audio bugs, and varicaps and high speed NPN transistors are ABUNDANT in old FM radios etc.
Love it. Whether you're tinkering with bikes or electronics I love watching your videos. Oh, and a big thanks for pronouncing solder properly. It's a pet hate I have "sarder"... it's not _"sarder"_.
tobortine I tend to pronounce it not as soLder but sa(w/l)-der but I do ever so slightly pronounce the 'L' but you have to listen for it to hear me say it so I say it sa-(almost silent 'L' that can almost come off as a 'W' as in saw but my tongue is at the roof of my mouth making an 'L')-der and I do the same with the 'B' in comb and the 'T' in castle... as in it's almost but not quite silent... but what I do say wrong is mirror... I pronounce it mirah where the ah is pronounced as in the name Mariah. Anyways cheers.
thank you sir. I remember my childhood memories! I always love to salvage dc motors and i made it as my generator. hahah mr hackaday before when i was a child i just only dispose those special electronics component like capacitors and transistor! but i never thought they are so special so much. I got tears of joy again because you made me remember my dream childhood. to be an invetor and engineer! ? more power to your channel.
Man, I really do enjoy your vids AND your talents. All the gear that has passed through my hands over the years make me envy your ability to scrounge and build stuff. You're an inspiration for those of us who do not have the space/garage to mess around the way you do. Keep on keepin' on and thanks for posting!
Great video Dino. Harvesting components is what I started out doing years ago. A word on desolder braid: Avoid the radio shack stuff! I'm not sure if it doesn't have enough flux in it, but the stuff just doesn't work well. It turned me off from the braid for a long time until I got some REAL desoldering braid. I'd assume the bulb in the oscillator is because it's a wien bridge oscillator for the side wave.
I'm not huge into this electrical stuff, despite using O-scopes, and all that jazz at work, but I am working on a 74 CB750 and hope to see some of your work down the line. Live the videos
That is exactly the challenge of salvaging components; you might end up just sitting there playing with the parts and not really saving many components.
Hi Dean, Glad your back to making videos, always enjoy them. You, All American Five Radio, and Andy Davies by the Sea, oh and Afrotechmods are my goto people for excellent Electronic Tutorials, Thankyou, very much appreciated. Been dabbling with TDA 2002, 2040, etc. chip amps, maybe a video on easy MONO to see what you come up with. Can do LM386 in my sleep, a specialized Op-Amp. Been using LM741,358,1458 ( 14 pin Quad ), non inverting input for from 7W + power output. Glad Hack a Week TV is back. All the Best. Cass.
Interesting wonderland of electronic salvage. More on safety for the newbies digging into loaded capacitors/power storage and discharging their load safely.
I'm so glad I found your channel. I seen your stuff a few years ago. Now I'm into electronics and programming micro controllers and doing all kinds of crap. your channel is cool.
I love your videos, reminds me of my childhood spending allot of time with my dad in his workshop at the back of the garden, tinkering with stuff... He was also a master at recycling stuff and using it to build or fix what ever anyone needed. Great work, keep on hacking!
I have always taken things apart and fixed most .....I recently came across a old 1940s portable radio....vac tubes and all just a good cleaning and blowing out and the thing worked had all the parts included they don't make em like the use to.....great video oh and I sold the radio on eBay for 100 bucks ....gotta luv what people toss huh....lol
You should have a proper load on the output of that audio generator to see the sine wave. It's probably expecting to drive something other than the high mega-ohm scope. Fun watching the antique electronics :) Keep on!
The light bulb on the bottom is a resistive couple. It limits the current to keep it from overloading. The variance in frequency is likely due to a gassy tube.
+Stinky Puppie There are several components to learning electronics. One resource I discovered that successfully combines these is the Gregs Electro Blog (check it out on google) without a doubt the most useful info that I have ever seen. look at this awesome resource.
Thank you for not parting out the bench multimeter before you gave fixing it a go... I was about to cry... some electrogeeks are all about the audio equipment and those guys are seriously sentimental and get quite hurt when people destroy equipment they love... I'm much the same but with test equipment.
I think the bulb is for stabilization of the oscillator. As current flows it heats up, resistance goes up, and vice versa. I had built one, though transistor version of it back in the day, simple oscillator and was working fine.
If you thought that the signal generator was fun, wait till you use one of those cassette deck head's! Just simply connect the head to a high gain input of an amplifier and you will be able to hear what the individual components are doing! It's literally the best way to find noisy resistors because you can hear them arching from the inside, even though they read correctly with an ohm meter.. You will probably end up sticking the head in a plastic pipe to make a probe out of it.. It really is an indispensable tool that that should be on every bench, maybe you might go as far to build a dedicated amplifier with a built in speaker in a nice enclosure... So it's kinda like the old signal tracers except you don't probe directly, you listen to the components as they talk to you in RF... It's the only tool that allows you to hear components in that way... You are going to love it!
@@HackaweekTV your welcome, if you want to have a look at how the idea works, there's a channel called Kreosan where all he did was unscrew the head from a Walkman... It's basically that simple. There's also Mr Carlson's Lab channel where he designed and built a kit where it works both ways in which you can directly probe or use the non contact method... He actually showed how you can actually hear an old noisy resistor that you would otherwise never had known that it should be replaced, it checked out fine with a multimeter and you would never suspect it... It's basically one of the best electronics test tools that you can have, all that you have to do is work out a routine where you find which frequencies to feed into the device under test to figure out which frequencies work best with which devices... I'm looking forward to a video where you have a go at this, I haven't done this myself but it's definitely a high priority... If the normal aux input of an amplifier isn't enough gain, you can try the turntable phono inputs which should have plenty gain... Best of luck!
Check out this video... ua-cam.com/video/4T7qkYY7LZM/v-deo.html He does it with what used to be used as a telephone listening device... Although I'm not sure if he knows that it can be used to sniff out bad components... But you will get the idea...
started to learn electronic not long ago and that's actually how i'm getting all my stuff right now, add a lot of old broken stuff and thing i know i'll never use again as it is stored away, even my breadboard is homemade from old pc ide cables lolll, and it works pretty well too!! till now i even found 1 7555, 1 7556, 5 mcu, lots of eeprom, and bunch of other usefull chips. the only thing i bought till now is my soldering iron, was planning on slowly buying everything, but from what i learned and found on the net, i think a lot of it is gonna be diy almost completly from recycled stuff, not because i don't have the money, but 1st it's a good way to learn without wasting, 2nd i always liked to recycle/repurpose everything i can, 3rd i think it's a good way to "go green" !!
Im pretty sure im a younger version of you. Im in the middle of salvaging all kinds of electronics and I have a 77 yamaha xs750 triple im in the middle of turning into a cafe bike. Fun stuff.
Interesting video , i use to have one of those Model 377 waveform gens , think i thru it in the garbage after getting a more modern one , almost regret doing that now.
1- safety: always wear safety glasses,keep your table clear of anything that could cut you; 2- check on the power cord: if its cracked, check for amp,power, and replace it; 3-open it, and check for rust- there may be water damage; 4- check to see if it works, then, if you can use, it, use it! 5- if it doesn't, and you need the parts, go for it! (I do these every time, and have found alot of parts,and am still doing it!) have a good one!
Wow that was so cool! especially seeing that old audio signal generator still working :-) I think you should take the cover sand the rust off of it repaint it to make it look like new. :-)
The lamp under the chassis is a negative resistance element in the wein bridge, if you have to replace it because of breakage make sure you use the right bulb. BTW the old EICO gear was pretty much bullet proof - good stuff cheap!
Thankyou for pronouncing solder as "solder".. not "SOD HER".. which sounds like dialogue from a gang rape. Your video is great, thankyou. After the machines take over they will be destroyed by men, who are the greatest predator..but then will come men who rebuild the machines from the ruins.. and the machines will rise again. You are one of the rebuilders. The predator who predates on predators. Gee that was poetic. I'd watch Arnie again now but he went into politics and I preferred him as Conan :-)
That solder wick is so darn expensive, though! Getting one of the solder-sucker - rubber baby nose-picker things) work pretty well, but the spring-loaded solder-pump syringes work much much better. It's cheeper than purchasing a dedicated desoldering iron.
That function generator is really nice, some of the old equipment has such a nice build quality. I'm not sure about the lamp underneath, maybe it's being used as a high wattage resistor?
If you're going to pronounce it "right", you should pronounce it, "solidair" or "solidus" : ) I'll stick with Merriam Webster's pronunciation, "sodder" - since I don't pronounce the "k" in knife. Middle English soudure, from Anglo-French, from souder to solder, from Latin solidare to make solid, from solidus solid
"I'll stick with Merriam Webster's pronunciation, "sodder" - since I don't pronounce the "k" in knife." -- So, by that logic, you would WED two pieces of steel together, MET ice to get water..... ?!
well that lamp in the bottom of the oscillator is a "dim bulb tester" were the bulb won't light if the circuit is working (its connected in series) but if the circuit has a short the lamp will illuminate protecting the rest of the circuit.
Hi Bro, I just found your videos and I really enjoy watching them,...I too am an "electronic enthusiast..guru..whatever" I like the fact that your making good use of some antiquated equipment, If its not broke ..dont buy a new one!
After I googled "solder" pronunciation, I realized that I liked your channel, and I like you and I don't care how you pronounce "solder",...then I realized that you might care, so the American English pronunciation is with a silent "l" , dictionary.cambridge.org/us/pronunciation/english/solder You can blame my grandmother, she started correcting my English when I started talking,...Thanks grandma,...and thanks Hackaweek TV. P. S. Try finding the optimum frequency on your signal generator for making goose bumps, and see if it helps you get a closer shave.
Haha this is the second time I watched this video and I just noticed you have a Prince Edward Island shirt on, that's where I'm from and still live. Love the vids keep em goin!!!
All you need for *salvaging lots of valuable parts* is a *pair of pliers* and a _propane torch._ Turn the *obsolete device* or *circuit board* upside down, heat with the *blow torch-* grab with pliers and go bang with the thing on a table. This technique even works with _delicate_ integrated circuits.
I was raised 1/5 Swiss, kind of. 20 years in the US have changed me. I am like now uncreative, collect unread books, yield to order, mindless, etc. Thank God for Adobe.
To desolder resistors I used hemostats or locking tweezers and applied the heat of the soldering iron, the parts were desoldered from the board very fast and you can be faster than using a solder sucker...
A few points: 1. the output from the signal generator was clipping on the sine wave output. Instead of going to the peak of the sine wave it was being limited to the value of supply rails 2. A speaker, let alone an internet video, will not reproduce ultrasonic frequencies. I am glad you did not scrap the sig gen. Not only is it a bit of vintage gear but with an overhaul it would still have use as a piece of test equipment.
+Alan Liefting I have to admit I was blown away that signal generator even worked at all. Those old paper capacitors are about as useful as rolled up newspapers today.
The osc is probably a wien bridge, these often use a lamp to stabilise the gain and give a distortion free o/p, if it was open gain would have been max or zero killing the o/p.
Daniel Astbury when it comes to what is and isn't worth it everyone will probably strike their own balance after a bit. If you don't want to pay, or if you don't have the time... a little experience helps find the balance.
Daniel Astbury Here we go again. Another one talking about buying x for y. Yes you can always just make x money if you are able, and then use that money to buy x product for y purpose. Desoldering has to do with the feel of doing something yourself, and then learning more about it. I prefer people to not put them in the landfills. Give them to schools, or someone who wants to learn about electronics (or their parents since there are many dangerous parts that can explode in your face), which is how this guy learned when he was young. If you don't have money to pay a school, then make sure to read about dangers with electrical parts and work with them safely. Desoldering is not about cost of money to buy x something for y reason. It's about the fun and pride of learning about something. That's how Bill Gates and many others initially began when they first started long ago.
haha my dog was laying behind me when you cranked the sound wave generator up he jumped up out of a dead sleep as soon as you hit like 15k or so .. definitely heard it to answer the question... haha
so if you wanted to you could get that olm reader running like new again I take it,,thats so kool man,,im getting into this I think,,the other day I fixed a 50 inch lcd t,,,2 capacitors wer blown,,bought a soldering gun and replaced thm,,boom bam bing,,it turned on after being broke at girlfriends moms house for 2 years,,,it felt so good to see that I could do that,,so now im hooked I think,,,im hooked,,im likeing anfd subscribing,,keep the vids coming,,im a new fan,,thnx a lot dude
Funny story About A Freq Generator. when I was In HS Our Horticulture teacher was an Old Navy Radioman. He was really Cool. and he knew I was into electronics so he surprised me by bringing in some old electronics equipment. one piece was a signal Generator exactly like you showed in the vid. he trusted me to stay in his classroom
[ Holding down the Fort ] with the door locked, while he was having lunch. he let another student that was heavy into electronics hang out in his classroom during lunch one day. Our school bell was an oscillator generated Horn sound. and while me and this other dude were messing around with the Freq Gen.I found a freq. that sounded exactly like the horn bell. it was the lowest scale Sign-wave Forget what the exact Hz rate was tho.. . maybe 70 Hz or So.
I noticed that the school Maint. had added a siren horn inside the classroom Up on the wall. under a partitioned Study table. well it was hooked up with wire nuts so we got up on the table, Ran the output up to the Out going speaker connections, and turned the thing all the way up ( The output was Loud without An amp even ) and did a count down. flipped the output switch On and timed it so it was as long a duration as the horn sound. there was a transom window over the door and we saw the campus cops walking around, and we cracked open the door and heard one saying to the other " I don't know where it came from! " this other Dude and I got a Real chuckle out of Pulling one over on the Campus Cops. That Prank Went down In BHS History. LOL
I find working with tools to be therapeutic, which is why salvaging is my hobby.
Euen it's my life I can't live without salavaging one thing per week
I've been salvaging everything else but I'm just now getting into Electronics. My wife will be thrilled. More "junk" laying around.
Think ive seen this guy in "Back to the future"?
Anyway nice video.
Also some precautions to think of for ppl that didn't know...
When salvaging old stuff (well new ones as well but not as bad) wash your hands after, the flame retardants used is not good for you as they act like hormones and mess with your body.
When salvaging things pre 1980~ or medical/military equipment, look out for beryllium containing components. Like ceramic insulators. Ceramic resistors and such. Do not salvage magnetrons and its not worth the risk.
Old computer screens (fat ones) contain allot of lead so try not to break them (for fun). The lead is there to protect users from roentgen rays as the screen uses high voltage which generates them (When on ofc).
Hobby Electronics Very sensible remarks.
Would like to add: Always use gloves and make sure there is proper ventilation when working with electronics (take a look at the guys hands, you'll know enough...)
The bulb in the oscillator is used as a variable resistor to keep the gain linear. If the feedback signal gets large enough, the signal stops being a sine wave and becomes a square wave. As more voltage gets generated, the filament heats up and its resistance increases.
As a kid salvaging and learning, a trick I learned was to take a propane torch and wave it over the backside of the board. As soon as the solder appears to soften or change color, give the board a rap on the table. Solder and parts fall out nicely. You could depopulate a board in a matter of minutes.
That stereo you said has a bad transformer. Easy fix. Tear open the wrapping around the coil windings along the primary side. There is a little thermal fuse inline with the wires coming from the primary connections. They get old and fail. Replace it or eliminate it and the transformer is back in business. The thermal fuse is too weak to survive a loud party for hours on a weekend in those units.
I would salvage the power amplifier from that with the power supply. Its a robust amp that can be driven directly from computer TV or other source or to use as a bench test stereo amplifier to listen to small signals without all the other junk.
Good job on the video :)
this guy looks like he's gonna show us how to make a flux capacitor in the next episode, super smart, thanks for dropping knowledge!
Oh cool! I didn't realize they made De-solder pumps with a soldering iron actually built in.
I must possess one.
Radio Shack! I have one, they're ok. Make sure to buy replacement tips.
Thanks for showing! You are one of the few people left that manually does things, like I do. Everyone now needs clean hands with their eye telephone. I Love using my brains and unfortunately its getting lost for good more each day. Great thanks again.
I love old electronics so I am really glad you didn't trash the Heath kit stuff just way to cool AND it works !
Seriously, there is a special charm about electronics designed and manufactured in the late 70's and early 80's. You can find hundreds of useful salvaged parts from an old radio from the 80's
Look up Wien Bridge Oscillator. The light bulb reduces distortion. HP was founded on marketing this idea way back when.
Yep, it's a form of negative feedback, when the there is too much signal going through the lightbulb it heats up and resistance increases, lowering the signal amplitude
I'm not too knowledgeable when it comes to this stuff, but I breathed a sigh of relief when you decided not to break down that milliammeter. That device was beautiful. Thanks for this. 😀
Very nice video! I was a technician with Curtis Mathes in the 80s and troubleshooted a lot of beautiful stereo systems.
When I was 16 (1991), I used to sit at my table in a quiet room and desolder components EXACTLY as you have just shown for HOURS - burning my bare fingertips and/or using a small terminal screwdriver :D - I used to make FM audio bugs, and varicaps and high speed NPN transistors are ABUNDANT in old FM radios etc.
Love it. Whether you're tinkering with bikes or electronics I love watching your videos. Oh, and a big thanks for pronouncing solder properly. It's a pet hate I have "sarder"... it's not _"sarder"_.
tobortine I tend to pronounce it not as soLder but sa(w/l)-der but I do ever so slightly pronounce the 'L' but you have to listen for it to hear me say it so I say it sa-(almost silent 'L' that can almost come off as a 'W' as in saw but my tongue is at the roof of my mouth making an 'L')-der and I do the same with the 'B' in comb and the 'T' in castle... as in it's almost but not quite silent... but what I do say wrong is mirror... I pronounce it mirah where the ah is pronounced as in the name Mariah. Anyways cheers.
thank you sir. I remember my childhood memories! I always love to salvage dc motors and i made it as my generator. hahah mr hackaday before when i was a child i just only dispose those special electronics component like capacitors and transistor! but i never thought they are so special so much. I got tears of joy again because you made me remember my dream childhood. to be an invetor and engineer! ? more power to your channel.
That Audio Generator is very cool. Nice old Heathkit project still in operating order. Sometimes older is just better. Thanks for the great video.
That waveform generator was pretty cool! I love old stuff like that :)
Man, I really do enjoy your vids AND your talents. All the gear that has passed through my hands over the years make me envy your ability to scrounge and build stuff. You're an inspiration for those of us who do not have the space/garage to mess around the way you do. Keep on keepin' on and thanks for posting!
Thanks for watching and for the words of encouragement! It really is a second job.
This is the youtube channel I've been looking for.... For so long.... yessss
Dude you took the words out of my mouth.i seen this guy a few years ago and found the channel again. It's nerd porn.
That's how I learned electronic in the 80s at about 13 years old
since then eBay became my source of new components !
Nice stuff keep them coming pal!
Great video Dino. Harvesting components is what I started out doing years ago. A word on desolder braid: Avoid the radio shack stuff! I'm not sure if it doesn't have enough flux in it, but the stuff just doesn't work well. It turned me off from the braid for a long time until I got some REAL desoldering braid.
I'd assume the bulb in the oscillator is because it's a wien bridge oscillator for the side wave.
yeah the bulb is from a wien bridge oscillator, it's used because it has a resistance changes as it heats up.
I'm not huge into this electrical stuff, despite using O-scopes, and all that jazz at work, but I am working on a 74 CB750 and hope to see some of your work down the line. Live the videos
Thanks for posting! My 12 y/o is gonna love the sound generator portion. I can see him scouring for an old sig-gen now!
That is exactly the challenge of salvaging components; you might end up just sitting there playing with the parts and not really saving many components.
Hi Dean, Glad your back to making videos, always enjoy them. You, All American Five Radio, and Andy Davies by the Sea, oh and Afrotechmods are my goto people for excellent Electronic Tutorials, Thankyou, very much appreciated. Been dabbling with TDA 2002, 2040, etc. chip amps, maybe a video on easy MONO to see what you come up with. Can do LM386 in my sleep, a specialized Op-Amp. Been using LM741,358,1458 ( 14 pin Quad ), non inverting input for from 7W + power output. Glad Hack a Week TV is back. All the Best. Cass.
Interesting wonderland of electronic salvage. More on safety for the newbies digging into loaded capacitors/power storage and discharging their load safely.
I'm so glad I found your channel. I seen your stuff a few years ago. Now I'm into electronics and programming micro controllers and doing all kinds of crap. your channel is cool.
I just love this Electronic Component shop. It must be that doll.
Your cat must have been flippin with those audio signals you were generating at such a high amplitude.
I love your videos, reminds me of my childhood spending allot of time with my dad in his workshop at the back of the garden, tinkering with stuff... He was also a master at recycling stuff and using it to build or fix what ever anyone needed.
Great work, keep on hacking!
I have always taken things apart and fixed most .....I recently came across a old 1940s portable radio....vac tubes and all just a good cleaning and blowing out and the thing worked had all the parts included they don't make em like the use to.....great video oh and I sold the radio on eBay for 100 bucks ....gotta luv what people toss huh....lol
Great video dude, I really enjoyed it. Its nice also to see an American pronouncing solder correctly!
I was just thinking about the fact that you're the first American/Canadian channel that can actually pronounce solder correctly!
Thanks! I love it when I get comments from American viewers that I'm pronouncing it wrong. :P
@@HackaweekTV How do you pronounce aluminium tho?
My favorite is when people put the L in Both. I ask them how do you spell "boLth"?
This makes me wish my parent's would've kept some of their ancient tech around or at least store it away somewhere
You should have a proper load on the output of that audio generator to see the sine wave. It's probably expecting to drive something other than the high mega-ohm scope.
Fun watching the antique electronics :) Keep on!
The light bulb on the bottom is a resistive couple. It limits the current to keep it from overloading. The variance in frequency is likely due to a gassy tube.
THIS GUY GETS MASSIVE STREET CRED ...for being the first American I've ever heard who can pronounce the word SOLDER !!! (sol·der)
Thumbs up for the intro music alone.
This should also be helpful making a robot in Fallout 4.
+Stinky Puppie There are several components to learning electronics. One resource I discovered that successfully combines these is the Gregs Electro Blog (check it out on google) without a doubt the most useful info that I have ever seen. look at this awesome resource.
Thanks friend! I will google it and check it out.
well you got another subscriber love these types of vids
10+ points for not saying sodder like most do, It's solder alright ;) Day has been made!
Thank you for not parting out the bench multimeter before you gave fixing it a go... I was about to cry... some electrogeeks are all about the audio equipment and those guys are seriously sentimental and get quite hurt when people destroy equipment they love... I'm much the same but with test equipment.
bit of history them batterys.hope u kept them.
I think the bulb is for stabilization of the oscillator. As current flows it heats up, resistance goes up, and vice versa. I had built one, though transistor version of it back in the day, simple oscillator and was working fine.
You were having too much fun with that wave generator! I was envious! LOL
Your audio wave generator is so much fun!
If you thought that the signal generator was fun, wait till you use one of those cassette deck head's!
Just simply connect the head to a high gain input of an amplifier and you will be able to hear what the individual components are doing! It's literally the best way to find noisy resistors because you can hear them arching from the inside, even though they read correctly with an ohm meter..
You will probably end up sticking the head in a plastic pipe to make a probe out of it.. It really is an indispensable tool that that should be on every bench, maybe you might go as far to build a dedicated amplifier with a built in speaker in a nice enclosure... So it's kinda like the old signal tracers except you don't probe directly, you listen to the components as they talk to you in RF... It's the only tool that allows you to hear components in that way... You are going to love it!
I'll have to try that. Thanks.
@@HackaweekTV your welcome, if you want to have a look at how the idea works, there's a channel called Kreosan where all he did was unscrew the head from a Walkman... It's basically that simple. There's also Mr Carlson's Lab channel where he designed and built a kit where it works both ways in which you can directly probe or use the non contact method... He actually showed how you can actually hear an old noisy resistor that you would otherwise never had known that it should be replaced, it checked out fine with a multimeter and you would never suspect it... It's basically one of the best electronics test tools that you can have, all that you have to do is work out a routine where you find which frequencies to feed into the device under test to figure out which frequencies work best with which devices...
I'm looking forward to a video where you have a go at this, I haven't done this myself but it's definitely a high priority...
If the normal aux input of an amplifier isn't enough gain, you can try the turntable phono inputs which should have plenty gain... Best of luck!
Check out this video... ua-cam.com/video/4T7qkYY7LZM/v-deo.html
He does it with what used to be used as a telephone listening device... Although I'm not sure if he knows that it can be used to sniff out bad components... But you will get the idea...
Why do I suddenly want a sound generator?
Because they are awesome???
to seize the means of sound production
This video upset my cat terribly! Thanks for the awesome video
So very nice to hear someone on U-tube pronounce solder right. " Sodda " is my pet hate.
started to learn electronic not long ago and that's actually how i'm getting all my stuff right now, add a lot of old broken stuff and thing i know i'll never use again as it is stored away, even my breadboard is homemade from old pc ide cables lolll, and it works pretty well too!! till now i even found 1 7555, 1 7556, 5 mcu, lots of eeprom, and bunch of other usefull chips. the only thing i bought till now is my soldering iron, was planning on slowly buying everything, but from what i learned and found on the net, i think a lot of it is gonna be diy almost completly from recycled stuff, not because i don't have the money, but 1st it's a good way to learn without wasting, 2nd i always liked to recycle/repurpose everything i can, 3rd i think it's a good way to "go green" !!
Im pretty sure im a younger version of you. Im in the middle of salvaging all kinds of electronics and I have a 77 yamaha xs750 triple im in the middle of turning into a cafe bike. Fun stuff.
The old signal/tone generator is awesome. Thanks for sharing. :)
does anyone else think that he look like that character from back to the future series
I could play around with that sound generator all day.
this face is very disrespectful
Interesting video , i use to have one of those Model 377 waveform gens , think i thru it in the garbage after getting a more modern one , almost regret doing that now.
1- safety: always wear safety glasses,keep your table clear of anything that could cut you;
2- check on the power cord: if its cracked, check for amp,power, and replace it;
3-open it, and check for rust- there may be water damage;
4- check to see if it works, then, if you can use, it, use it!
5- if it doesn't, and you need the parts, go for it!
(I do these every time, and have found alot of parts,and am still doing it!)
have a good one!
Wow that was so cool! especially seeing that old audio signal generator still working :-) I think you should take the cover sand the rust off of it repaint it to make it look like new. :-)
The lamp under the chassis is a negative resistance element in the wein bridge, if you have to replace it because of breakage make sure you use the right bulb.
BTW the old EICO gear was pretty much bullet proof - good stuff cheap!
I have seen the light... and it is directing me to salvage stuff :)
Thankyou for pronouncing solder as "solder".. not "SOD HER".. which sounds like dialogue from a gang rape. Your video is great, thankyou. After the machines take over they will be destroyed by men, who are the greatest predator..but then will come men who rebuild the machines from the ruins.. and the machines will rise again. You are one of the rebuilders. The predator who predates on predators. Gee that was poetic. I'd watch Arnie again now but he went into politics and I preferred him as Conan :-)
That solder wick is so darn expensive, though!
Getting one of the solder-sucker - rubber baby nose-picker things) work pretty well, but the spring-loaded solder-pump syringes work much much better. It's cheeper than purchasing a dedicated desoldering iron.
Flux works wonders when using solder wick/braid. It's magical and makes desoldering so much easier
That function generator is really nice, some of the old equipment has such a nice build quality. I'm not sure about the lamp underneath, maybe it's being used as a high wattage resistor?
If you're going to pronounce it "right", you should pronounce it, "solidair" or "solidus" : )
I'll stick with Merriam Webster's pronunciation, "sodder" - since I don't pronounce the "k" in knife.
Middle English soudure, from Anglo-French, from souder to solder, from Latin solidare to make solid, from solidus solid
Merriam Webster, there's your problem. Webster couldn't spell
"I'll stick with Merriam Webster's pronunciation, "sodder" - since I don't pronounce the "k" in knife." -- So, by that logic, you would WED two pieces of steel together, MET ice to get water..... ?!
I just found your channel I’m a instant fan
took me a while before i realised you were pronouncing the word soLder instead of sodder.
Love from the UK
well that lamp in the bottom of the oscillator is a "dim bulb tester" were the bulb won't light if the circuit is working (its connected in series) but if the circuit has a short the lamp will illuminate protecting the rest of the circuit.
I enjoyed your video. It was very helpful. Thank you! I love the sludge hammer!
thanks for the interesting video, it's always useful to keep things for other uses.
Very cool channel I love doing this kinda stuff
Great video! I grab whatever electronic junk i can find. dumpsters,side of road wherever. pc montior, tube tv
Hi Bro, I just found your videos and I really enjoy watching them,...I too am an "electronic enthusiast..guru..whatever" I like the fact that your making good use of some antiquated equipment, If its not broke ..dont buy a new one!
After I googled "solder" pronunciation, I realized that I liked your channel, and I like you and I don't care how you pronounce "solder",...then I realized that you might care, so the American English pronunciation is with a silent "l" , dictionary.cambridge.org/us/pronunciation/english/solder You can blame my grandmother, she started correcting my English when I started talking,...Thanks grandma,...and thanks Hackaweek TV. P. S. Try finding the optimum frequency on your signal generator for making goose bumps, and see if it helps you get a closer shave.
AWESOME ... I LOVE OLD TECH .. ... + GOT SOME FLASH BACKS AS IF I WAS AT PINK FLOYD CONCERT S ...
great video, thanks and I love the out takes
That little bulb made HP rich. Its cubic V vs. I stabilizes the oscillator.
Great video! I hope your doing well after 10 yrs since this video posted
Your Light Bulb in the bottom is used to Limit Current. The higher the Current the higher the Resistance of the filament.
Haha this is the second time I watched this video and I just noticed you have a Prince Edward Island shirt on, that's where I'm from and still live. Love the vids keep em goin!!!
All you need for *salvaging lots of valuable parts* is a *pair of pliers* and a _propane torch._ Turn the *obsolete device* or *circuit board* upside down, heat with the *blow torch-* grab with pliers and go bang with the thing on a table. This technique even works with _delicate_ integrated circuits.
Nope. Only works if you want toxic fumes and very sharp plastic and metal shrapnel that will stab you .
yea, did found a dead cockroach on an old circuitboard. i wonder was it in use as an a resistor or as a connection of some type? ..
The music in the intro gave my dog an epileptic attack! Nice video though
I would love to see some cymatic experiments with that tone generator.
that signal generator sounds rad!!
I was raised 1/5 Swiss, kind of. 20 years in the US have changed me. I am like now uncreative, collect unread books, yield to order, mindless, etc. Thank God for Adobe.
To desolder resistors I used hemostats or locking tweezers and applied the heat of the soldering iron, the parts were desoldered from the board very fast and you can be faster than using a solder sucker...
A few points:
1. the output from the signal generator was clipping on the sine wave output. Instead of going to the peak of the sine wave it was being limited to the value of supply rails
2. A speaker, let alone an internet video, will not reproduce ultrasonic frequencies.
I am glad you did not scrap the sig gen. Not only is it a bit of vintage gear but with an overhaul it would still have use as a piece of test equipment.
+Alan Liefting I have to admit I was blown away that signal generator even worked at all. Those old paper capacitors are about as useful as rolled up newspapers today.
I was thinking that the paper caps may have been causing the sine wave deformation. I'd definitely re-cap it.
Nice! I have a Heathkit SquareWave Generator from like the 60's or something...
Nice. I dig all of that old tec!
The osc is probably a wien bridge, these often use a lamp to stabilise the gain and give a distortion free o/p, if it was open gain would have been max or zero killing the o/p.
They may have used the light bulb on the bottom as a fuse for over current protection. Just a guess anyways.
Great videos!
Buying passives and discreets are usually cheap, I would say the effort of unsoldering old boards is probably not worth it.
***** For me and you yes, but on further thought I think for some people it could be the only way to get parts.
Daniel Astbury when it comes to what is and isn't worth it everyone will probably strike their own balance after a bit. If you don't want to pay, or if you don't have the time... a little experience helps find the balance.
Daniel Astbury I would agree some parts are worth less than what the materials cost to unsolder them, but I do it to save gas, and for the fun of it.
Daniel Astbury Here we go again. Another one talking about buying x for y. Yes you can always just make x money if you are able, and then use that money to buy x product for y purpose. Desoldering has to do with the feel of doing something yourself, and then learning more about it. I prefer people to not put them in the landfills. Give them to schools, or someone who wants to learn about electronics (or their parents since there are many dangerous parts that can explode in your face), which is how this guy learned when he was young. If you don't have money to pay a school, then make sure to read about dangers with electrical parts and work with them safely. Desoldering is not about cost of money to buy x something for y reason. It's about the fun and pride of learning about something. That's how Bill Gates and many others initially began when they first started long ago.
skybitscom That's fair enough if it's not for the money. I personally wouldn't waste me time for a few pence worth of parts.
All I saw so far was the intro, and I subbed!
the lamp in the signal generator makes a really low distortion oscillator. it can be done with op amp too.
haha my dog was laying behind me when you cranked the sound wave generator up he jumped up out of a dead sleep as soon as you hit like 15k or so .. definitely heard it to answer the question... haha
so if you wanted to you could get that olm reader running like new again I take it,,thats so kool man,,im getting into this I think,,the other day I fixed a 50 inch lcd t,,,2 capacitors wer blown,,bought a soldering gun and replaced thm,,boom bam bing,,it turned on after being broke at girlfriends moms house for 2 years,,,it felt so good to see that I could do that,,so now im hooked I think,,,im hooked,,im likeing anfd subscribing,,keep the vids coming,,im a new fan,,thnx a lot dude
i think the sinewave at 20:39 is square-ish because you were overdriving the output stage, you had it cranked all the way up
Pretty cool stuff, learned a lot!