@@THYC . Yeah..the LED is controlled from stock all-in-one ESC/Receiver board. Changing the Transmitter/Receiver, you do away the feature of the lights. but maybe you can hook up the led wire to the new receiver channel data pin or to a lower voltage power. There where 6 pin wire connector (on the board), each wire connects to different led's. Mine, starts with Red/Black/Green /Yellow/Blue/White. I think white is ground. Have tried testing the wire found the following wire coding. RED is YELLOW LED Turn Signal PASSENGER Side BLK is YELLOW LED Turn Signal DRIVER Side GREEN is RED LED STOP LIGHT YELLOW is WHITE LED FRONT HEAD LIGHTS BLUE is also WHITE LED REVERSE LIGHT Although you will loose the light animation.
Thanks for the video, my sons mn99s did the same thing and I upgraded very similar to yourself. Have you found any way of getting the stock LED lights to work though?
Hello, Can you help me? 😊 My mn99s stock receiver was burned and has a code of YX-2.4G-150R-V. I bought online the same receiver with a code of YX-2.4G-150R-V1 it has an addition of 1 after the V. Will the stock transmitter work with my new receiver? I asked the seller and he said it will work. He even asked his supplier and they said that it is now the newest version (the one with V1) the factory produces and it will just work fine but I still find it skeptical if it will truly work because the code isn't same. I am worried if the stock transmitter will not pair to my new board I ordered.
Hi, I need to replace the servo on my son's MN99s. Do you know what the numbers are to search for it? Trying to get it faster than Banggood, I think there is one on Amazon but they all look the same, Thanks.
With these upgrades, on paper it should be waterproof, esc and receiver are nicely wrapped up in rubber glove fingers, cable tied then I fill the opening with vaseline. Im a trailer so I try to find a route around the deeper parts 😂
@@pmp0giboy here's a video about my mn99 😁 ua-cam.com/video/RSg-Du7yzho/v-deo.html The mn99s has a silver body, a light kit and the gearbox is slightly lower geared from what I can tell the rest is identical to the mn99
Nice simple upgrades that make these things so much better. Decent 'how to' mate 👍
Thanks buddy! Learning from the best 😉
Simplest set-up there is,with my favourite transmitter too.
He was very happy with his upgrades 😊
How does the upgrade affect the lighting system ?
Lights don't work, they have a different connection 😔
@@THYC . Yeah..the LED is controlled from stock all-in-one ESC/Receiver board. Changing the Transmitter/Receiver, you do away the feature of the lights. but maybe you can hook up the led wire to the new receiver channel data pin or to a lower voltage power. There where 6 pin wire connector (on the board), each wire connects to different led's. Mine, starts with Red/Black/Green /Yellow/Blue/White. I think white is ground.
Have tried testing the wire found the following wire coding.
RED is YELLOW LED Turn Signal PASSENGER Side
BLK is YELLOW LED Turn Signal DRIVER Side
GREEN is RED LED STOP LIGHT
YELLOW is WHITE LED FRONT HEAD LIGHTS
BLUE is also WHITE LED REVERSE LIGHT
Although you will loose the light animation.
Thanks for the video, my sons mn99s did the same thing and I upgraded very similar to yourself. Have you found any way of getting the stock LED lights to work though?
I haven't found a way yet, I just removed them all. You can buy separate light kits that can be controlled by your receiver.
Hello from southeast alaska sweet info bro
Hello, Can you help me? 😊
My mn99s stock receiver was burned and has a code of YX-2.4G-150R-V. I bought online the same receiver with a code of YX-2.4G-150R-V1 it has an addition of 1 after the V. Will the stock transmitter work with my new receiver? I asked the seller and he said it will work. He even asked his supplier and they said that it is now the newest version (the one with V1) the factory produces and it will just work fine but I still find it skeptical if it will truly work because the code isn't same. I am worried if the stock transmitter will not pair to my new board I ordered.
Hi, I need to replace the servo on my son's MN99s. Do you know what the numbers are to search for it? Trying to get it faster than Banggood, I think there is one on Amazon but they all look the same, Thanks.
Older wpl like the c14 and b24 use the same servo as mn90s.
www.wpl-rc.com/products/17g-dmg-servo?_pos=8&_sid=845d2b8bf&_ss=r
Also look up the jx mg1181 its the same size as the mn and older wpl.
Which roofrack is that fellow?
That's the stock one that comes with the mn99 😊
Do you use capasitor for the motor ?
I left the stock one on there yes, but you can run a 20amp without one the capacitor is for the stock board.
Hello mate, can you show a tutoral to fix its gearbox mate, the gear in mine isn't in the right place, hopefullh you can make a video on how to fix it
Are there any spots to mount a bumper?
Yes the original bumper screws into the servo tray 👍 are you looking to install a upgrade bumper?
Mn99s = waterproof?
With these upgrades, on paper it should be waterproof, esc and receiver are nicely wrapped up in rubber glove fingers, cable tied then I fill the opening with vaseline.
Im a trailer so I try to find a route around the deeper parts 😂
Hi, do you know if the gearbox and diff had grease from the factory?
Yup there's grease, not alot, the kit also comes with a sachet
sir how much time it will work if I only change the electronics and do not use metal upgrades
It'll still work just as long! The 20amp esc is perfect for the 260 motor, the mn99s has metal axle and pinion gears so they wont get chewed up.
Good Job 😉👍
Cheers bro 👊😊
Do you know how to change frequency on it? (MN 99s)
To change the frequency would require changing the transmitter/receiver.
What's wrong with the current setup?
I was going to drive with friends and they had the same model
They got worried that the cars would “run away”
They are 2.4ghz. Should be fine with no interference 🤟
Thanks
What is the wheelbase of this rc?
I will double check for now sir, I do know its wider and longer than a c14
@@THYC thank you. I am interested in this rc model but there is not much info about it
@@pmp0giboy just checked, 20cm length from centre of front wheel to back. 12.5cm width 👍 ifs there's anything else just ask😊
@@pmp0giboy here's a video about my mn99 😁
ua-cam.com/video/RSg-Du7yzho/v-deo.html
The mn99s has a silver body, a light kit and the gearbox is slightly lower geared from what I can tell the rest is identical to the mn99
@@THYC Thank you very much!
does anyone know where i can buy a on off switch for them? mines been broken for half a year, i just need to us it :(
Remove the switch completely and join the wires, it turns on when battery is connected.😊
Make sure to insulate the connection so it doesn't short on anything.👍
@@THYC sorry for late response, turns out it wasnt lol, i got it sorted all good.
Mine came dead in the box