Hello viewers , I am just here to give my review. I just tried this beautiful DIY and it came out amazing. The only problem for me was that when I popped the balloon the shape of the tissues were spoiled too probably because I let it dry for 3 hours only But I just blowed up another balloon inside the tissue because the shape wasn't spoiled alot and the stand came out very pretty So all thanks to this video of this beautiful showpiece.♥️😊
I'm making this pretty moon light right now, it's so so so awesome especially the stand and it's very beautiful 👌👍 thank you a lot for this amazing craft 💖💜
guys i realy dont know whats wrong but the balloon has like popped about two times while i am applying the tisssue paper ,so please tell what i am doing wrong
It’s a battery powered one .. watch at 8 - 8.40 .. if you have a electrical based light same idea works on that too .. simply put a hole in a cardboard piece and took the plug and wire through that hole ..
Glue + water thickness matters here .. If the mixture is so watery balloon won't get sturdy.. don't worry .. you can solve this by adding extra layers of tissue to get sturdy moon shape.. you can reuse the spoiled moon shape .. Insert a new balloon into the spoiled moon and blow the balloon.. now you can make other 3-4 layers out of tissue papers ... let it completely dry .. you will get fine moon shape..
Di can you tell me when we will make this moon that time tissue will going inside so di what we will do tell me please reply me please please please 🙏🏻🥺🙏🏻🥺🙏🏻🥺
If the shape is spoiled, then by using the balloon technique, like blowing it inside the moon ...do we again have to keep it for drying for 24 hrs after applying layers?
@@shinobu_the_butterfly yeah dear .. normal string lights usually get hot when they use for long hours... I think it's quite normal .. cork string lights won't get hot that much .. but it will give low light only..
May be your glue mix is watery or you stick less tissue layers .. we can Recorrect it .. try this 👇 Take the balloon out .. insert a new balloon in flattened tissue ball .. blow the balloon so that it comes to the shape and then stick two layers of tissue paper.. make sure the glue is thick enough.. let it dry ..
Hello viewers ,
I am just here to give my review.
I just tried this beautiful DIY and it came out amazing. The only problem for me was that when I popped the balloon the shape of the tissues were spoiled too probably because I let it dry for 3 hours only
But I just blowed up another balloon inside the tissue because the shape wasn't spoiled alot and the stand came out very pretty
So all thanks to this video of this beautiful showpiece.♥️😊
😻😻 awesome .. happie to hear that yours turned out well ..
Aapne fevicol use kia tha??? Tissue paper stick krne k lie..balloon k upr
Came to see diy moon
But got very impressed when I saw diy stand too
😍😍 thank you so much 🥰🥰
Wow this is awesome! Very creative.
I May do this myself, thanks for the tutorial!
Semma.... Moon light idea super.... Adhum stand idea excellent..... 👍
All ur works are awesome
Vera level -U hav a great talent , I wish u to reach more success
Thank you so much for making this video 😢 I've been trying to find a perfect diy product for my school project and this is it🎉
Thank you so much ☺️
Supper chechii😍 do some more like this... Very interesting
Sure dear .. thanks for watching ❤️
Chechii meaning??
@@bunnyyt6770 sister
@@lathak783 OK❤️
I'm making this pretty moon light right now, it's so so so awesome especially the stand and it's very beautiful 👌👍 thank you a lot for this amazing craft 💖💜
Thank you so much ☺️
Es increíble yo ya tengo la figura echa con el soporte y todo solo me faltan las luces no las tengo :(
No sound
very interesting video
TRIED ONE WITH coloured silk paper used yellow and a white with sparkles..used battery operated string mini lights came out gorgeous....
Awww 🥰 happy to hear this .. thank you so much for commenting ☺️
Please can you explain a little on how you fix the light
Is the light powered by battery or there's connection to the electricity to power the light
Poi quando devi sostituire le batterie smonti di nuovo tutto
You can fix the head part(battery ) outside ..
Bro thats like Mercury
Yeah you are right 😅
برفوووو عليكي استمري ربنا يوفقك
I have a question... How do you make the lights glow in the dark? Do you make a switch?
No .. it has multiple options .. warm and color lighting options ..
Mein nahi samjhi. Tumne switch ON kesa kiya
very interesting video
M A R A V I L L O S A A A A
GRACIAS POR COMPARTIR !!!!!
Thank you ☺️
New subscriber now love your videos ❤️❤️💕💕
Thank you so much for your support ❤️
Can I use only 1 led light..?
Yes you can
guys i realy dont know whats wrong but the balloon has like popped about two times while i am applying the tisssue paper ,so please tell what i am doing wrong
Use thick balloon
this moon lamp is very beautiful and very easy thank you👍
Beautiful art craft.
Please can you explain a little on how you fix the light
Is the light powered by battery or there's connection to the electricity to power the light
It’s a battery powered one .. watch at 8 - 8.40 .. if you have a electrical based light same idea works on that too .. simply put a hole in a cardboard piece and took the plug and wire through that hole ..
How many hours do we have to let it dry???????
24 hours
Mene jab balloon phara to ussi k sath sara tissue kharab
Hi
My balloon did'nt came out perfectly
Can you please tell me how to do it plz....
Glue + water thickness matters here .. If the mixture is so watery balloon won't get sturdy.. don't worry .. you can solve this by adding extra layers of tissue to get sturdy moon shape.. you can reuse the spoiled moon shape ..
Insert a new balloon into the spoiled moon and blow the balloon.. now you can make other 3-4 layers out of tissue papers ... let it completely dry .. you will get fine moon shape..
@@letsdocrafts3307 Ok
Thank you😊
Is it necessary to use cardboard sheet inside popsicle sticks? Please tell.
It's not necessary dear .. if we use cardboard it will give strength to the stand ..
How many layers of tissue we have to use??
As much as you want depending on how thick you looking to make it
😍😍 yeah and also it’s based on the thickness of the tissue paper ..
@@letsdocrafts3307 thank you sis
Btw I have make it and it turns so good 💯😊❤️❤️❤️❤️✨
Bnn
How to make gluee
Beautiful...
Can we use other kind of paper instead of tissue?
Yes you can .. use white paper for a neat finish ..
@@letsdocrafts3307 thank you so much
Wow it's easy and beautiful 😍
Thank you so much 🥰
Wow what an idea sema ma apadiyae moon ah Kaila vachykitu Iruka madiri iruku real ah awesome work dear 😍
OMG! Wow
Thank you so much 🥰
Actually it's very good but how to light it's only half to represent as moon.
You can add any remote controllable lights or string lights .. I actually add a string light at the end ..
@@letsdocrafts3307 thanks
Fake
WHAT KIND OF DECORATION LIGHTS
Any kind of string lights .. easily available in online and craft stores ..
What type of glue u use
Can i know
Normal white glue.. fevicol
Di can you tell me when we will make this moon that time tissue will going inside so di what we will do tell me please reply me please please please 🙏🏻🥺🙏🏻🥺🙏🏻🥺
Use thick tissue papers .. and add 5-6 layers .. if not sure then ..
add a spoon of white cement with glue mix it will give sturdy finish..
Di we have to put the mixture of cement and glue inside the moon or outside the moon reply
@@letsdocrafts3307 please reply di
Wow😍 very easy DIY 👏
Can i make it with latex balloon?
Yes you can
Can we do it with news paper or has any side effects
Yes dear you can make it with newspaper too.. but the result will different .. you can paint it white colour .. or choose any different colour ..
Awsome
Please lite ka name bata do
Battery operated string lights ( available in online )
Maasha Allah👌👌
What's the white thing u apply with a brush
glue
And mix it with water
Super interesting.
Thank you so much ❤️
Waaaaow
Thank you so much 🥰
NYC bro 👍
Itna dimag late kahase ho bhai it's just amazing
Ma shaa allah... 👍👍👍
WHAT KIND OF DECORATION LIGHTS
2 meter normal string lights .. you can easily get it from online or craft shop
@@letsdocrafts3307hola disculpa , las luces tienen que ser a juro de color blancas ? No pueden ser de colores o amarillas??
If the shape is spoiled, then by using the balloon technique, like blowing it inside the moon ...do we again have to keep it for drying for 24 hrs after applying layers?
Yes .. give it proper time to dry ..
@@letsdocrafts3307 ok
How long does the tissue take to dry?
Let it dry for 24 hours ..
se deja secar cada capa'?
No .. dry after all the layers finished ..
Very nice and thank you for this idea
Thank you so much 🥰
i've try to make it two times but the baloon always explode 🥹😕
Try with other thick balloon ..
Don't pop it.. instead cut the tip slowly with scissors ✂️ then you will get perfectly
@@letsdocrafts3307 yes i've try it and make it smaller than before, it works! but yeah not that solid
@@ZoyaMuskan-kh4re uh i should've try it, thanks!
❤
♥️
Love from pakistan
Thank you so much dr .. ❤️
return love from india ..
Wow! Moonlight super asusal rocking dear😍
Hey it's paper so won't it burn due to the heat if not I'll def try
It’s based on the light you use .. if the light produce too much heat then don’t use that .. mine is not much hotter..
How to fix the lights again
Though it’s a cardboard base you can easily remove and fix ..
@@letsdocrafts3307won't it be ruined
Amezing... beautiful 👍👍❤️
Thank you so much 🥰
ca i use just flashlight it is for my project
Yes use can try it with small flash light ..
hi...can u say what type can lights we use for this diy?
Normal string light ( warm color ) available in craft shops .. or you can use remote controlled led lights available in online and shop too ..
Baloon foot jaye to😲
Will the string light loose its charge fastly
Yes if it’s lighten for long time batteries will drain ..
How many layers did u made with the tissue
5 layers
Reminds of bts isn't it
Mam apne light kaise jalayi
HELLO, A QUESTION WHAT ARE THE CALLED LIGHTS YOU USE?
Normal string light .. rainbow color and warm color ..
What is the name of the type of lights you used to illuminate the lamp?
I used normal string lights .. you can use wireless lamp with remote controls .. easily available in online ..
@@letsdocrafts3307 dose it not get hot? I have bought many string lite but they all get hot after lighting for a while
@@shinobu_the_butterfly yeah dear .. normal string lights usually get hot when they use for long hours... I think it's quite normal .. cork string lights won't get hot that much .. but it will give low light only..
Its very awesome 👌👌👌
Thank you so much 🥰
Good job🤩🤩🤩
Thank you so much 🥰
how long did it take to dry completely
It takes 24 hours to dry completely ..
Nice and gorgeous . Like it very much
How to protect it from dirt and debris
Gently wipe off the dust with dry cloth ..
@@letsdocrafts3307 great..thanks
HOLA UNA DUDA COMO SE LLAMAN LAS LUCESITAS QUE USAS
Can we color it with white acrylic paint?
Yes you can color it with acrylic
@@letsdocrafts3307 okay...happy crafting😀
Supper
Thank you so much
Oye sabes como se llaman las lucesitas
🌑🖤👌
Awesome 🎉!!
Fabulosos
Thank you so much ☺️
Very cool! ☺️🙏✝️🇺🇸
Nice
But I have a balloon with a tissue attached so it goes flat, how do I do that
May be your glue mix is watery or you stick less tissue layers ..
we can Recorrect it .. try this 👇
Take the balloon out .. insert a new balloon in flattened tissue ball .. blow the balloon so that it comes to the shape and then stick two layers of tissue paper.. make sure the glue is thick enough.. let it dry ..
@@letsdocrafts3307 okey
😍
Thank you so much 🥰
Mashaa allah....😍
Looks great! Thankyou for sharing.
Thank you so much 🥰🥰
@@letsdocrafts3307 🥰
It's a plastic balloon???
It's normal rubber balloon..
How many layers of tissue
Minimum 3-5 layer
Paper kaha milaga
Thank you😍😍😍😍♥️♥️♥️
Super
Can you plz tell me the length of the string lights you use?
You can use 3 - 5 meter one .. it will give more glow .. or use other type of remote operated lights easily available in online..
@@letsdocrafts3307 ok thank you so much for reply🥰
Cool but can u give link of those lights
www.amazon.in/dp/B0916KN8Z1/ref=cm_sw_r_cp_apa_glt_fabc_2KQJRHX6DJWM9TTRKKYF?_encoding=UTF8&psc=1
Great...especially the stand 👌👌👌
Thank you dr
Beautiful 👏👏👏👏🤜🤛❤️
Thank you so much dr ❤️