I just looked up for myself freecut tile and glass cutter. There is one tool that scores the tile and then you apply the clamp that is a part of the same tool and it breaks perfectly on the score mark. It is faster and cleaner break. It cost less than 30$ on Amazon and at Lowes.
Diamond hole saw for small hole. Big hole, cut slightly smaller, then use a diamond shaping bit to get up the the line. Will be MUCH cleaner cuts. (and faster)
Use the angle cut method he used three times on three pieces of tile... the third one will come out circular (if you aren't a beaver that is). Do _try_ to make it circular each time one will come out fine (probably the third try). These tiles aren't generally expensive so you can break a few and not care.
That's very stupid if you drill any tile with the rotor hammer, never, never use the rotor hammer to drill any tile.. and all the drill bits for glass will drill any tile like granite, Porcelain, Travertine, slate,ceramic, ( you don't neet to punch it first) if the drill bit spin around on any surface is because it doll doesn't have any more sharpening, that's when you need to get a new one or otherwise will heat up and will possibly the tile or the bit will brake.. even if you pour water to minimize the heat will take time to drill and will evaporate the water...there's special tool for any application's..
Compre tableta buena. Si es del caso remojela 24 horas. No le ponga el martillo al taladro. Acaba con todo el enchapado por una tableta que necesita? Chambon
ua-cam.com/video/Wu78P0XciLI/v-deo.html
Super work 😍
Thank you. 🙏
I have seen the second method but the hole was made through the back, this seems to me a much better option, thank you.
Thank you. 🙏
Thanks for the video. The second tip is really awesome, way easy to do something like that than I thought
Thank you. 🙏
Super useful stuff, nice work 👏👏
Thank you. 🙏
I like both methods, a useful video that I will save. 🙂
Thank you. 🙏
Good job, really useful.
Thank you! 🙏
Nice work, thank you man.
Thank you. 🙏
Good job, useful tips. 👍
Thank you. 🙏
I just looked up for myself freecut tile and glass cutter. There is one tool that scores the tile and then you apply the clamp that is a part of the same tool and it breaks perfectly on the score mark. It is faster and cleaner break. It cost less than 30$ on Amazon and at Lowes.
Pare foarte ușor de făcut, e bine de știut. Bravo pentru idee👍
Thank you. 🙏
Smart Tip
Thank you. 🙏
Good 👍👍
Thank you. 🙏
Good job! Tks
Brilliant and TQ for the tips
Thank you. 🙏
It works if you don't use the hammer
Very nice.
Thank you. 🙏
Diamond hole saw for small hole. Big hole, cut slightly smaller, then use a diamond shaping bit to get up the the line. Will be MUCH cleaner cuts. (and faster)
Thank you. 🙏
I need to cut an outside circle and have it not look like it was cut by arthritic beaver
Use the angle cut method he used three times on three pieces of tile... the third one will come out circular (if you aren't a beaver that is). Do _try_ to make it circular each time one will come out fine (probably the third try). These tiles aren't generally expensive so you can break a few and not care.
😅😂😅😂😅😂😅😂😅😂 castor.😅😅😅😅👍👍👍
Я такое делал 25 лет назад, когда ютуба в планах не было
That's very stupid if you drill any tile with the rotor hammer, never, never use the rotor hammer to drill any tile.. and all the drill bits for glass will drill any tile like granite, Porcelain, Travertine, slate,ceramic, ( you don't neet to punch it first) if the drill bit spin around on any surface is because it doll doesn't have any more sharpening, that's when you need to get a new one or otherwise will heat up and will possibly the tile or the bit will brake.. even if you pour water to minimize the heat will take time to drill and will evaporate the water...there's special tool for any application's..
Gaura din mijloc pentru ce ai dat o daca ai taiat cu flexul, sa se sparga usor pe interior?
It is another tile that I cut with the grinder, there are 2 different examples and 2 different tiles. 🙂 Tks! 🙏
Good
Ça aurait pu fonctionner avec la mèche à béton si tu ne mettais pas le cogneu sur la drill.
Compre tableta buena. Si es del caso remojela 24 horas. No le ponga el martillo al taladro. Acaba con todo el enchapado por una tableta que necesita? Chambon
Ok, thank you! 🙏
Einfach das Schlagwerk ausschalten...billiger geht's nicht!
Pourquoi j’ai pas vu cette vidéo avant-hier 😢
Thank you. 🙏
👌
Thank you. 🙏
Sorry aber so schneidet man keinen Kreis aus das Ergebnis ist ja grauenvoll !
👏👏
Thank you. 🙏
👏👏👏
Дырка у тебя, а это отверстия 😂
😂😂 WTF I'm a professional builder
Good for you, but this is not for professionals with professional tools.
Un oyo por broca
Nice tips. 🙂👍
Thank you! 🙏