On-Grid Solar System. Hybrid Inverter Complete Wiring Setup.
Вставка
- Опубліковано 14 тра 2022
- An example of On-grid Hybrid Inverter, Complete Wiring Setup.
On-grid solar system, the array of solar panels are connected with the inverter, which is connected to the grid through your electricity meter.
#luxpower
#solarpower
#solarenergy
#ongridsolarsystem
well done good presentation
Thank you, just sharing my idea.
Hello Great product! I have a request, I have purchased the Luxpower lxp-lb-US 12k . I would like for you to cover it as well as you have done here with the 5k unit. The Luxpower lxp-lb-US 12k inverter has been mention many times on several forums and many are interested in this unit as it is very similar to another brand but handles more power. I would appreciate it! Good day mate!
That was great
bro.very god
Mere flat me DG hai, lekin start hone me 10-12 minutes lag jate hai. kya main inverter laga sakta hu? Light jate hi inverter on ho jai aur DG start hote hi inverter off ho jae. Kya Aisa wiring possible hai?
Amazing 🤩
By any program do this presentation?
Can you as well show us how to ground both grid and eps right from the inverter
Hello please explain the Digital I/V/W Protection Relay connection. Otherwise great video 🤟
at 6:34 the positive red wire is output to ATS from left hand side but all other red wires are on the right hand side, any idea about this occasion ???
It depends on your ATS orientation where the Live and Neutral connection is. At 1:46
DC ground and AC Ground are common ground ?
Your neutrals should not be coming from your circuit breakers, they are connected to a neutral bus bar.
Yes correct. It depends on what type of breakers is available.
@@hanzlightdiy4670 I have a 1000w ups inverter that plugs into the grid and then I have a 200 ah gel battery. Can I add a 100w solar panel with a 30amp solar charge controller.
@@stephenswanepoel3722 Yes you can add but it is too small for your 30amp SCC, assuming your solar panel specification system Configuration is 100w/5amps/12vdc, it would take 40hrs to full charge your 200ah battery. Study the basic “ohms law formula” for calculation. (Just sharing)
Grounds that go from AC SP, PV SP and Device ground buss bar are going each separately to to the ground. Does it means there should be actually three separate wires going physically to the ground or theu can be combined with say a buss bar to have single wire leaving the house?
Yes you are right. You can combined all in one bus bar and increase the wire size going to the ground rod. Thank you.
Good morning, my 2.4kva hyprid inverter when connected to my lithium battery, there is current on both wires of the AC output, why?
Yes, because it is a complete loop of resistance.