Al and fudge from 6d diesel's gave you a good shout out on hes channel to check you out so I've subscribed as i could do with some tips on painting vehicles as im great with i do welding and fabrication for 25 years and do vehicles in my spare time and be getting a project of my own this year depending on wat i can afford as i like retro fords and vauxhalls but cars go for silly money but i can tell all ready your better then you think mate 👍
Hello from Egypt Jason and Reece, I still managed to watch from the beach 😂 Enjoyed the video, new products and a PDR ! Great results as always, thanks for sharing mate. Cheers Vince.
I never have any luck with the PDR i have a few kits but i suck. Awesome results there my man color looks good too. Love the music at the end 🎧🎵🎶 splendid video keep them coming. 👊🏼
Its harder than you think isn't it, id love to be able to do it well i find it interesting and a very handy skill to have in our trade. Must keep practicing Thank you mate, really appreciate you kind words and support Have a blessed week Man 🙏🙏🙏
Another excellent repair Jason. I did like your new dryer, it could give my GHD hair dryer a run for its money, with all of those settings lol. Great content, I enjoyed watching ❤.
Looks perfect dude 👌 I’ve never painted a car before so I’m sucking up all the info I can been learning a lot although I know the practical will be a learning curve to ! I’m hoping to paint my streetka soon and hopefully take it to ford fest this year fingers crossed 🤞 nice job my good man 👍
Great job Jason. On your clear gun did you change from I nozzle to the 0 nozzle? What am I doing here and not working you may ask hahaha. It's 108 degrees and everything I'm spraying is basically drying in mid air hahaha. Just letting the sun go down and I will probably have to start working nights when temperature is much cooler. I don't want to roast myself.
@@TheHumblePaintSprayer333 Yes it's a nightmare. I'm located in deep South Texas. Couple of miles off the Gulf of Mexico which makes it extremely humid. I've noticed on the streets that lots of brand new cars with the clear wearing out. Had never seen that before on such new vehicles. Took a small break and better get back to work. Have a great weekend.
Hello matey when i was rectify minis, paint work in the factory 🏭 we only were only allowed to paint each panel that was not up to spec.and blends were a no no! Thats why there's slight variations on shade between the panels most the bonnets were repaint by the robotson the main line other panels painted by hand. off main line repairs .was that pure silver with a jet black roof, could be wrong .infrared heat lamps dry the water base off atreat in factory. Get a small one better than a blowers.both even better.
Hello mate, can’t have cables and electric in the booth while I’m spraying, the blowers work fine when I increase the air temperature Thanks for sharing this 👍
I do the same thing 😂 with the pdr it does interest me no end but I only do it on panel's i know iam painting same as you safe then just incase 😂 nice job as always
GOOD VIDEO JAY AND REECE THANKS FOR SHARING THAT INFORMATION JAY WHATS THE BEST FULID TIP FOR THAT MIPA F37 WET ON WET DARK GREY PRIMER ITS 5 .1 MIX JAY I HAVE A DEVIBLISS FLG5 WITH 1.8MM IS THAT OK OR A 1.4
I’ve have a healey 3000 in solid green I had a ladder fall and hit the front wing it’s dented and has a small split underneath where it bolts on can you alloy weld and repair what lead time are you talking
Al and fudge from 6d diesel's gave you a good shout out on hes channel to check you out so I've subscribed as i could do with some tips on painting vehicles as im great with i do welding and fabrication for 25 years and do vehicles in my spare time and be getting a project of my own this year depending on wat i can afford as i like retro fords and vauxhalls but cars go for silly money but i can tell all ready your better then you think mate 👍
babiliss hair dryer for the win 🤣🤣🤣
Can’t beat a high quality hair dryer 😂👍
I will stick to a cheapie out of Asda that air powered one is to expensive for me!
Hello from Egypt Jason and Reece, I still managed to watch from the beach 😂
Enjoyed the video, new products and a PDR !
Great results as always, thanks for sharing mate.
Cheers
Vince.
Legend!
Colour looks spot on especially as it's edge to edge.
The humble paint wizard! 😊
👍 was close enough 👍
great job mate came out well 👌👌
Cheers mate 👍👍👍
I never have any luck with the PDR i have a few kits but i suck. Awesome results there my man color looks good too. Love the music at the end 🎧🎵🎶 splendid video keep them coming. 👊🏼
Its harder than you think isn't it, id love to be able to do it well i find it interesting and a very handy skill to have in our trade. Must keep practicing
Thank you mate, really appreciate you kind words and support
Have a blessed week Man
🙏🙏🙏
Brilliant as always..... You're a wizard Jason!
Thank you 🙏
Another excellent repair Jason.
I did like your new dryer, it could give my GHD hair dryer a run for its money, with all of those settings lol.
Great content, I enjoyed watching ❤.
😂 brilliant 🤩
Very nice job. Hard colour to match but I'd say you got it bob on .
Thank you! Cheers!
Nice job
Thank you! Cheers!
Looks perfect dude 👌 I’ve never painted a car before so I’m sucking up all the info I can been learning a lot although I know the practical will be a learning curve to ! I’m hoping to paint my streetka soon and hopefully take it to ford fest this year fingers crossed 🤞 nice job my good man 👍
Thanks, hope my videos can help and always feel free to ask, good luck with it
Great job Jason. On your clear gun did you change from I nozzle to the 0 nozzle? What am I doing here and not working you may ask hahaha. It's 108 degrees and everything I'm spraying is basically drying in mid air hahaha. Just letting the sun go down and I will probably have to start working nights when temperature is much cooler. I don't want to roast myself.
Thanks 🙏 I have a 1.2 O and the CC which is more of a i pattern for clear
Cor where are you that’s hot 🥵 it’s a nightmare I bet
@@TheHumblePaintSprayer333 Yes it's a nightmare. I'm located in deep South Texas. Couple of miles off the Gulf of Mexico which makes it extremely humid. I've noticed on the streets that lots of brand new cars with the clear wearing out. Had never seen that before on such new vehicles. Took a small break and better get back to work. Have a great weekend.
Nice job 😊👍
Thanks 👍
My wife thinks I am bloody mad watching paint dry 😂😂😂😂
😂😂😂👍 im watching it everyday
Great job buddy!👍
Thanks 👍
Hello matey when i was rectify minis, paint work in the factory 🏭 we only were only allowed to paint each panel that was not up to spec.and blends were a no no! Thats why there's slight variations on shade between the panels most the bonnets were repaint by the robotson the main line other panels painted by hand. off main line repairs .was that pure silver with a jet black roof, could be wrong .infrared heat lamps dry the water base off atreat in factory. Get a small one better than a blowers.both even better.
Hello mate, can’t have cables and electric in the booth while I’m spraying, the blowers work fine when I increase the air temperature
Thanks for sharing this 👍
Great job Jason keep up great work you do on your channel 👍👍
Nice one 👍
I do the same thing 😂 with the pdr it does interest me no end but I only do it on panel's i know iam painting same as you safe then just incase 😂 nice job as always
That dent remover guy Martin he's very good deffo worth a watch
Better to be safe doing it on panels were painting
Thanks Matey
👍
@@richardthepainter I will check him out cheers 👍
👌🏻
GOOD VIDEO JAY AND REECE THANKS FOR SHARING THAT INFORMATION JAY WHATS THE BEST FULID TIP FOR THAT MIPA F37 WET ON WET DARK GREY PRIMER ITS 5 .1 MIX JAY I HAVE A DEVIBLISS FLG5 WITH 1.8MM IS THAT OK OR A 1.4
Thanks Andy, definitely a 1.4 for wet on wet
@@TheHumblePaintSprayer333 is that what you use I havd been using jay devibliss flg5 finsh line 1.8
Another great job jay, what tape do you use
Cheers mate 👍 it’s Q1 Tape
I’ve have a healey 3000 in solid green I had a ladder fall and hit the front wing it’s dented and has a small split underneath where it bolts on can you alloy weld and repair what lead time are you talking
Sorry I don’t really do welding
Think I would of been on the filler and skipped the glue on that one
Yeah I know, like I said I like to give it a little practice doesn’t matter if I mess it up when I’m gonna paint it