Citroen DS3 2009-2015 | Bi-Xenon HID Headlight Projector Upgrade DIY installation
Вставка
- Опубліковано 18 вер 2024
- Citroën DS3, year 2009, 2010, 2011, 2012, 2013, 2014 and 2015, headlight projector retrofit Mini H1 installation instruction video. Installed in aftermarket DEPO headlights, sealed with butyl.
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.co...
𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:04 Remove the bulb caps
0:10 Heat the headlight (1600 Watt heatgun/500 degrees Celsius) to soften the sealant
0:30 Unclip the lens and remove the lens when it's still hot
1:04 Remove the H7 bulb cap
1:17 Disconnect the reflector assembly from the housing
1:31 To mount the Mini H1 6.0 the H7 fitting has to be adjusted with a dremel tool to have enough thread exposed to screw the nut on the headlight.
1:58 Place the projector through the H7 fitting with the H7 adapter and nut
2:20 Place the bulb ring and secure it with the 3 screws
2:44 The Pegasus shroud has to be adjusted to fit in the reflector with a dremel tool
3:00 Insert the shroud centric ring in the shroud
3:20 Place the shroud and clean off all fingerprints
3:30 Connect the reflector assembly in the housing
3:52 Place the lens back on the housing
4:04 Heat the headlight again to soften the sealing and press the lens back on the housing
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• Citroën DS3 2009
• Citroën DS3 2010
• Citroën DS3 2011
• Citroën DS3 2012
• Citroën DS3 2013
• Citroën DS3 2014
• Citroën DS3 2015
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retro...
Instagram: / retrofitlab.com_official
Our website: www.retrofitla...
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
#Citroen #D3S #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement
I watched all your videos.spectacular informational videos.I made my own car looking at this video.thank you very much for your efforts.good work for you.
Hello,
Do you think it will fit in my C3 II (2012) ? DS3's headlamps and mine are very similar
Good job!!!
To seal the acrylic back, do you use a specific glue or reuses the residual glue?
He used butyl
ziet er super uit alleen jammer dat jullie de ombouwservice niet meer zelf aanbieden
Hi retrofitlab. One question. that Kelvin h1 bulb do you use video in dogde ram?
Hi retrofitlab
thanks for answering so fast.
c4 headlights are similar to those of c3. Once and mount these projectors in c4 but they were not of good quality, so I ask you because I have seen your videos and I liked the mini projectors h1, if I said that to mount bulb h7 no problem then it me with that.
12C nueva llegada de 3 pulgadas Bi - Xenon HID proyector lente H1 H4 H7 H13 9007 9005 9006 Blanco Amarillo Azul Rojo Verde doble CCFL Ángulo de ojos.
Hi retrofitlab
One question.
mini kit wiring kit twin 6.0 h1, carries a direct current power to the battery.
Thanks and regards.
Hello he is possible of to put the Mini H1 Twin kit on optics front C3 2011 has the place of H1 and H7?
Hi I did method 2 with the box. I have heated the headlight to 600 degrees for 20 minutes. but the glue is so hard that it does not open. what else can i do to open it.I am disappointed!!
Will you ever make videos again? Would like to see a 2016 Hyundai Elantra.
Nice video..how do you align your lights.
Hello Retrofitlab'm from Brazil great guy work was very good! Was very interested in this projector to install on my DS3, which temperature was used in this blower? I would buy one identical to this, where can I find?
Very good job thank you.
***** Hello for nothing! I thought hahaha never find a solution! Sorry did not understand what you mean by DEPO headlight, my headlights have automatic regulation hinders it? Could you tell me where to buy these projectors and import to Brazil? Thank you for your attention.
*****
Ok I understand, can you send to Brazil? You have sales site? How much for just the projectors with shipping? Well I think the headlights will stay together too expensive relying on taxes for Brazil .. Thanks for listening.
Caio Rozalem e ai irmão, resolveu? Haha
Dudes nice work! Let me know if those headlights are originals or alternative market. Citroen uses Valeo here in South America, almost impossible open it up. I'm using TYC (brand) in my car retrofitted.
Tks sirs!
Hi retrofitlab
could be mounted on a citroen c4 2014 h7 kit twin mini h1 projectors Kit 6.0. Greet and thanks
Hi
Could show a close up of the card box please
many thanks
so in this headlight 2.5" is maximum size? won't fit a 3.0" projector?
Do you have the name of the bulb type that would now go into this projector? So, I.e D1S
Is it possible to purchase an assembled kit for those who are not as handy?
Or send you a couple DEPO for you to fit the kit into and an order for the job and shipment back (once you provide me with a cost estimate)?
Thanks in advance
Installed in aftermarket DEPO headlights?
Is it possible to make him on the side H1 of the projector?
Could you do this with a Xsara picasso?
Can you guys do on a Focus Mk3 Headlight?
My Friend, why don't you tape the cutting line to the wall for reference? Why do you do it by heart? Can you explain, please? Thank you
Because we aimed the projectors while they were in the car without the glass front so we could adjust it a bit when the headlight was in the car.
What measures has the box and how do I do not melt the headlights? thxxxx
Do you have any images of this fitted and working?
Je vais tenter la manip' sur la mienne, du coup savez vous si on a toujours les pleins phare ou pas?
@terry gaulos, not sure what you mean. Can you please rephrase this for me?
Citroen berlingo 2010 video or fitment?
which ds3 shroud? (e46,panamera,mini??)
Hi Retrofitlab
Is possible to do it on a headlights from Renault Megane 3 2012?
Thks
Hi. I will see it then. Thks :P
what temp do you get the lamp housing up to an waht was ypu using if you dont mind me asking
In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time.
Method 2 is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
@@Retrofitlab
thank you for help and knowledge
@@octymocty132 You're welcome :-)
Honda Civic 2011 ?
Donde se escuentra usted
www.retrofitlab.com
Ford s max 2007
measures cover please.
Retrofitlab .the diameter of the chrome cover ..sorry but do not speak English
Echt super...Verboten....