Hi Sir, I am using Sim15_millturn_setup_sinumerik_mm_dual_sync.prt file to demo for customer. I want to use this model to machine customer's product and demonstrate to them. I created some new tools from Library, when I precess "Synchronous", NX CAM is error with CSE ERROR . Could you check for me ? Thank you so much
Hi, CSE is out of scope here. You should use the NX Manufacturing discussion group for this question to ask for help there. community.sw.siemens.com/s/topic/0TO4O000000MiilWAC/nx-manufacturing
The application is delivered and integrated with NX CAM. To start the application and if you don't have the button in the ribbon use the command search to find it. If you want to install a post processor based on Post Configurator take a look into this video: ua-cam.com/video/GBBu5_D-bQU/v-deo.html General I recommend to use the latest version of NX (currently 1953) to modify your posts based on Post Configurator.
Hi Sir, Post Configurator can not open a Post Builder post and Post Builder can not open a Post Configurator post due architectual differences. There will be a converting tool up to 5axis available very soon.
@@tienthao3815 Yes, it's planned in future to provide a Haas UMC750 with our new Post Hub cloud application. I assume within the next 3weeks posthub.sws.siemens.com
Hello, I watched your all videos. Also webinars. Can you share more documentation with me? Thanks
Well detailed, thank you 🙏
Hi Sir,
I am using Sim15_millturn_setup_sinumerik_mm_dual_sync.prt file to demo for customer.
I want to use this model to machine customer's product and demonstrate to them. I created some new tools from Library, when I precess "Synchronous", NX CAM is error with CSE ERROR
. Could you check for me ?
Thank you so much
Hi,
CSE is out of scope here. You should use the NX Manufacturing discussion group for this question to ask for help there.
community.sw.siemens.com/s/topic/0TO4O000000MiilWAC/nx-manufacturing
thank you , the configurator is better to Post builder.
Glad to hear this and we still continue with improvements and enhancements.
how instal post config?
The application is delivered and integrated with NX CAM. To start the application and if you don't have the button in the ribbon use the command search to find it.
If you want to install a post processor based on Post Configurator take a look into this video:
ua-cam.com/video/GBBu5_D-bQU/v-deo.html
General I recommend to use the latest version of NX (currently 1953) to modify your posts based on Post Configurator.
HIi Sir! Post Builder can open post?
Hi Sir, Post Configurator can not open a Post Builder post and Post Builder can not open a Post Configurator post due architectual differences. There will be a converting tool up to 5axis available very soon.
Thanks sir! This post not easy to change. In the feature, you can make post for Haas UMC 750?
@@tienthao3815 Yes, it's planned in future to provide a Haas UMC750 with our new Post Hub cloud application. I assume within the next 3weeks posthub.sws.siemens.com
@@insidepostconfigurator5606 Great! Thanks sir!