hey haz un ejemplo real esa llanta ni siquiera estaba inflada de tal forma que parece que la desprende con facilidad y ademas el rim no tiene pivote eso esta nuevo y por lo tanto la muestra deja algo que desear a comparacion de una llanta sellada inflada y sucia ....
When he eventually got the tyre off, that half turn table spin when the tyre & bar stayed at the "12 o'clock" position...... TPMS is broke & on the floor😣
I really don't see the need for the extra arms just seem like too much of a contraption if you have to still use the metal to pick up the time over the duckhead
The arms are used because the tire is very stiff, being a run flat tire. The tire resists coming off of the bead and going into the drop center. It takes alot of force to manipulate it manually. The arms not only make the job easier, it's a near necessity to do low-profile run flats without damaging the tire or requiring loads of extra help.
Piece of shit tire changer just like the Atlas junk. even on that small tire just look at the how low(of Center Line) the demount blade(bead breaker) is mounted. Take a set of 33, 35 or 37's and see how well you like that.
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Artigo muito interessante e útil em nosso centros automotivo 👏👏🇧🇷
That's good new technics about tire fitting
Good video I learn a lot from it thank you.
I like the music :-)
Very easy for pro but for thr beginners is very hard
Best tire changer ever low price,
Atlas tc755 with one or two arm they work excellent with any run flat tire.... 315 35 20 or any low profile...
very good !
Good video but it needed to be narrated 👍
Good job
Sure you can if you don't care about scratching the rim or ripping a tire.
Good helper
อะไรมันจะใส่ง่ายป่านนั้น.. สุดยอด
ساعه يله ايكمل تاير واحد
Вы попробуйте снять и поставить 19-й ран флет на стареньком станке без третьей руки
كم السعر
hey haz un ejemplo real esa llanta ni siquiera estaba inflada de tal forma que parece que la desprende con facilidad y ademas el rim no tiene pivote eso esta nuevo y por lo tanto la muestra deja algo que desear a comparacion de una llanta sellada inflada y sucia ....
all these demo I don't think this guy too familiar his machine.
When he eventually got the tyre off, that half turn table spin when the tyre & bar stayed at the "12 o'clock" position...... TPMS is broke & on the floor😣
Plus that nice drop off the head with the bar, no guard, that'd be a seriously pissed off customer
lol You are correct
بكام السعر
I really don't see the need for the extra arms just seem like too much of a contraption if you have to still use the metal to pick up the time over the duckhead
The arms are used because the tire is very stiff, being a run flat tire. The tire resists coming off of the bead and going into the drop center. It takes alot of force to manipulate it manually. The arms not only make the job easier, it's a near necessity to do low-profile run flats without damaging the tire or requiring loads of extra help.
Exactly my point
How much pls.?
Hunter is best
this music is dreadfull
Kelamaan
6 and a half minute video, lol, I could change change that tire in half the time without a machine!
I change onli 1 min all car and jib workin in kuwait
Dude? Tires?
I call BS
this is not a runflat lol
Nhìn anh làm không được chuyên nghiệp
Okay sorry but this tire is a 245/50/18 245/50!!! There are no reasons why you should even have to use the arms for these type of tires... rookie
RTS ٦٧تلف
ةوهلب٨ .
I do this tire 245 50 18 i rft in 2 minutes only
terrible
👎👎👎👙
Piece of shit tire changer just like the Atlas junk. even on that small tire just look at the how low(of Center Line) the demount blade(bead breaker) is mounted. Take a set of 33, 35 or 37's and see how well you like that.