Off the top of my head I can't remember n I don't have it anymore to check. Pretty sure it's the same as whatever the QR2 comes with lol sorry I can't be more help
thanks for the vid im dealing with troubleshooting my wheel not being recognized when i have my QR1 lite installed. It connects fine if I don't use the QR at all and plug it right into the QR1 lites base w/the usbc connection. I have a QR2 coming in (who knows when) but i got the qr2 base & collar super early way before that. So I 'm going to try using the QR2 collar on the QR1 lite base... i really hope this solves my problem its like the connection isn't making contact when it's using the QR1 lite in the middle and I have tightened this thing to their ungoldy specs of like 15nm with a torque wrench. It is TIGHT. And FWIW I couldn't tighten the bolt ANYWHERE near the 15nm with their allen keys. You really need a torque wrench. I maxed out my strength turning that bolt then I put the wrench on it and it moved like BUTTER about 5 FULL circles more. I don't know what else to do if this qr2 collar doesnt work. Also there is SO much conflicting information. All of fanatecs graphics / guides show that you need to put the collar close but NOT touching the metal shift going to the wheel. Leave a tiny gap. But then I've been reading forumReddit posts for 2 days and there have been Fanatec employees teling people that the collar needs to be near the back, or in the center. I can't figure out where the collar actually needs to go
Fanatec employees are probably warehouse staff n are to good to follow instructions. Tightening the clamp to 15nm rather than 8nm (specified in the instructions) isn't going to fix it either I don't think. Did it work before? what did u do when it stopped working?
@@4Tash It's never worked I actually got it brand new on Friday. I just tried the QR2 collar and still no bueno. I wonder if something inside of my QR lite is broken everything visible looks perfect. somehow its not connecting to that usbc in the base i think.. i might pop the back off and see if that usbc port is loose or something.. im running out of ideas..
@@4Tash It's a CSL DD with the clubsport wheel rim gt alcantara. its one of the ready2 race bundles.. but i just read that the clubsport wheels cant work with qr1 lite because it doesnt have torque pins? That doesnt make sense i didnt put the wheel in the bundle it was one of the bundles.. PC yes
@@mj-np9sy I just thought, there's different caps that sit over the pins wheel side, I bet u have to change that. And the pin presses a button on the wheel to limit the torque but I'm pretty sure this doesn't affect the csl dd, on for more bases with more nm
I change it all the time depending on what I'm doing 👍 when I was trying different settings for WRC I found linear to be more enjoyable to use, changed all the settings in game as well to remove some of the harshness because that snap/click when changing direction with the QR lite was annoying. When I fitted the QR2 I reset all the ffb settings in game and it felt amazing!
I like the video a month later. Also, I watched a shit ton of car reviews when they come out, and still appreciate when ppl review the same car even a year or two later. There are swim technique videos I watched a decade ago, and still appreciate swim technique videos posted this year. Very interesting take you have. Thanks for your input buddy
What size hex tool did you use to remove the screw from the original collar ? Thanks in advance
Off the top of my head I can't remember n I don't have it anymore to check. Pretty sure it's the same as whatever the QR2 comes with lol sorry I can't be more help
Nice tourqe wrench haha cheers for the mention 😂😂
Ask n u shall recieve 😂
thanks for the vid im dealing with troubleshooting my wheel not being recognized when i have my QR1 lite installed. It connects fine if I don't use the QR at all and plug it right into the QR1 lites base w/the usbc connection. I have a QR2 coming in (who knows when) but i got the qr2 base & collar super early way before that. So I 'm going to try using the QR2 collar on the QR1 lite base... i really hope this solves my problem its like the connection isn't making contact when it's using the QR1 lite in the middle and I have tightened this thing to their ungoldy specs of like 15nm with a torque wrench. It is TIGHT. And FWIW I couldn't tighten the bolt ANYWHERE near the 15nm with their allen keys. You really need a torque wrench. I maxed out my strength turning that bolt then I put the wrench on it and it moved like BUTTER about 5 FULL circles more. I don't know what else to do if this qr2 collar doesnt work. Also there is SO much conflicting information. All of fanatecs graphics / guides show that you need to put the collar close but NOT touching the metal shift going to the wheel. Leave a tiny gap. But then I've been reading forumReddit posts for 2 days and there have been Fanatec employees teling people that the collar needs to be near the back, or in the center. I can't figure out where the collar actually needs to go
Fanatec employees are probably warehouse staff n are to good to follow instructions. Tightening the clamp to 15nm rather than 8nm (specified in the instructions) isn't going to fix it either I don't think. Did it work before? what did u do when it stopped working?
@@4Tash It's never worked I actually got it brand new on Friday. I just tried the QR2 collar and still no bueno. I wonder if something inside of my QR lite is broken everything visible looks perfect. somehow its not connecting to that usbc in the base i think.. i might pop the back off and see if that usbc port is loose or something.. im running out of ideas..
@@mj-np9sy so what base n wheel is it? are u on pc?
@@4Tash It's a CSL DD with the clubsport wheel rim gt alcantara. its one of the ready2 race bundles.. but i just read that the clubsport wheels cant work with qr1 lite because it doesnt have torque pins? That doesnt make sense i didnt put the wheel in the bundle it was one of the bundles.. PC yes
@@mj-np9sy I just thought, there's different caps that sit over the pins wheel side, I bet u have to change that. And the pin presses a button on the wheel to limit the torque but I'm pretty sure this doesn't affect the csl dd, on for more bases with more nm
Legend
You are! 😎
noticed you had ffb set to linear, I would recomend setting it to peak for much greater detail!
I change it all the time depending on what I'm doing 👍 when I was trying different settings for WRC I found linear to be more enjoyable to use, changed all the settings in game as well to remove some of the harshness because that snap/click when changing direction with the QR lite was annoying. When I fitted the QR2 I reset all the ffb settings in game and it felt amazing!
So professional, When I re-installed my shaft after it slipped I just torqued it by hand and hoped for the best lol
I didn't want to chance it
try to get an affiliate link, so you can make some cash on the side. Other than that good job mate
My channel is so small I'm not sure they will 😕 worth asking though
I think it is worth a try :) The channel is growing and the content is great!@@4Tash
Appreciate the kind words!
Love the video dude !
Cheer 😉❤️ love the comment!
You’re about a month to late lol these have been out and thousands of videos. Be original if you’re gonna be close to release why waste time
Thanks for your input ❤️
I really Liked the Video even 2 weeks later. Thanks for the Input and Youre Opinion of the QR2@@4Tash
I like the video a month later. Also, I watched a shit ton of car reviews when they come out, and still appreciate when ppl review the same car even a year or two later.
There are swim technique videos I watched a decade ago, and still appreciate swim technique videos posted this year. Very interesting take you have. Thanks for your input buddy
@@JimmyDShea appreciate it! ❤️
@@Silas-Cube you are very welcome ❤️