Those locomotives are built by EMD (Progress Rail), Those particular models are called GT42AC. They were built for Bangladesh Railway. They are being exported to Bangladesh.
It’s quite possible they’re on Flat Cars because the Flat Car would be Rolled onto a Ship with Rails up in Canada and could be going Anywhere Around the World. 🌎
Buffers and knuckle couplers on the same unit indicate somewhere on the Indian subcontinenet. One of Australia's systems had this set-up for a while... not sure if they do anymore.
It's cool how the locomotives are placed on flatcars that hav quad axles! Normally just the standard double or pair axles will do for most flatcar loads. These cars had two quad axles sets one at each end of the car. 8 axles per car, even more than the locmotives themselves!
Suffice to say these are Progress Rail export locomotives coming from Muncie and going to an east coast port for waterborne transport. And now, some irony. I have a copy of the ConRail Final System Plan from 1975, a line by line description and expected outcome. In it the former Erie was all but acquired by the N&W from Marion west as an outlet for the original N&W from Columbus. Obviously that didn’t happen. So imagine a parallel universe where those export locomotives as well as much of the freight you saw coming east on the former Erie and turning south.
While heading to Salem, Va. I came upon a NS locomotive waiting for clearance to proceed in Elliston, Va. It was pulling 7 brand new locomotives destined for the UAE.
They haul those locomotives to keep from putting any miles on them before they get to where they’re going to, and that way it don’t take away from their warranty on the locomotives, but their standard gauge locomotives, but that’s what a railroad friend of mine that works for the railroad told me That’s the reason why they haul them
@timmyfrierson2684 Sorry about that, but you and "railroad friend" you put in front of you to shield you are liars. These locomotives are BR BP-32, they run on broad gauge, which is 1676 mm, and need therefore to be tranported until they are in Bangladesh or India. That’s the reason why they haul them
Very interesting , Triple Traction Motor sets Fore and Aft on all 5 . Very Short and on Narrower gage wheel sets . Almost guaranteed to be EXPORT product .
Wow some of those straps on those tie downs over trainers didn't look very tight, would they ever stop to check?? Like a truck 🚚 driver would do? Awesome 👌 freight train 🚆 video 📹
Although it has been commented that these particular locos are bound for Bangladesh. There are numerous countries where narrow gauge is the standard such as Japan, New Zealand, Much of Australia ,Thailand ,Vietnam , Malaysia and South Africa. Plus many places in Europe also use narrow gauge for certain short lines
I love Marion Ohio for railfans. Always something to see & film! Loved the first intermodel. The light you had when filming was beautiful. Great selection of trains that day Ty! ❤😊👍
@@marengtech313 yes, youre correct on that one, i had no idea what color TV was until the 1960s, i just turned 74, and its a whole different world out there now.
Because these locomotives are broad gauge and built by EMD, see the bogies and fuel tank, my thoughts also were Pakistan, India or Bangladesh, but others already confirmed that these are for Bangladesh.
Here's the scoop... They're built by Progress Rail in Muncie and usually (not always) shipped to the Port of Morehead City here in NC for export. NS will bring down several of these a month from New Bern NC on NS train P90 or P97. The last outbound shipment left the Port about two weeks ago, headed to Mongolia. The PRSX reporting mark is a dead giveaway.
What date was this filmed? Realistically the loco's are GE or EMD, They're definitely narrow gauge and they may be going to Africa. Probably GEs since EMD would ship directly to Charleston,
I think they're US locomotives they have a US coupler. The rails sitting on flat cars seem to be in line with the rails below the train so I think they're US locomotives.
That is not a US-Coupler, it is some crap for rcpotrt locos. In addition, US railways do not use buffers. The Number of the locos is BP-32, made by PR for Bangladeshi Railways.
India and Bangladesh are transitioning - slowly - to the USA coupler system. Looking closely under the coupler, one can see a dangling link for the older link-and-pin system; the two bumpers (buffers) are easier to see. All new engines on the Indian subcontinent have this either/or coupler arrangement. Concerning gauge, at 18:17 the near shipping rail appears to be directly above the outer cap of the bearings of the flatcar wheels.
This was an interesting read on the Bangladesh Railway. en.wikipedia.org/wiki/Locomotives_of_Bangladesh
@@KO4L_Lloyd thank you for the post and watching the video.
Those locomotives are built by EMD (Progress Rail), Those particular models are called GT42AC. They were built for Bangladesh Railway. They are being exported to Bangladesh.
17:40 Thank you for telling us the thing we came for.
BANGLADESH RR IS 5’ 6” GUAGE WITH AN 1000 MM NARROW GUAGE.
@@rossbryan6102 India still uses 5' 6" gauge, and has begun to phase out its meter gauge lines.
How do you know that? No markings whatsoever! How do you know?
The reason they are flatcars is because they are Non-standard gage, GE's and are set and blocked for ship loading.
1,676 mm (5 ft 6 in) broad gauge locomotives
EMD (Progress Rail), GT42AC.
I enjoy watching your videos from Linton Indiana!!!
@@raybonhomme404 thank you Ray for watching
It’s quite possible they’re on Flat Cars because the Flat Car would be Rolled onto a Ship with Rails up in Canada and could be going Anywhere Around the World. 🌎
duh!
Wow nice, thank you for this Video😍😍❤❤
@@EntertainmentWorldz thank you for watching
That’s a very nice K3LA Ty
Enjoyed the video
@@RICKCOPE-q9d thank you Rick for watching
Ive seen those units going past me my place here on the Blue Ridge District line going to Norfolk for export
@@GaryMP4.8 so cool… thank you Gary for watching
Buffers and knuckle couplers on the same unit indicate somewhere on the Indian subcontinenet. One of Australia's systems had this set-up for a while... not sure if they do anymore.
Bangladesh has 5’6 inch guage Indian broad guage
That's GT42AC made by EMD/Progress rail. Judging by the paint scheme, they're heading towards Bangladesh.
It's cool how the locomotives are placed on flatcars that hav quad axles! Normally just the standard double or pair axles will do for most flatcar loads. These cars had two quad axles sets one at each end of the car. 8 axles per car, even more than the locmotives themselves!
Yeah, probably heavy duty flatties to help spread the weight along the tracks.
10:57 This is the most manifest train ever- almost every kind of car ever and never more than a few of a kind in a row
@@SwC3ATN I love the mixed manifest trains the more variety the better.
They’re tier Zero compliant
1) Class 6600 of Bangladesh Railway, Type BP-32
2) Bangladesh
3) broad-gauge, 1,676 mm gauge
Origin: Progress Rail, GT42AC-IAC
Suffice to say these are Progress Rail export locomotives coming from Muncie and going to an east coast port for waterborne transport. And now, some irony. I have a copy of the ConRail Final System Plan from 1975, a line by line description and expected outcome. In it the former Erie was all but acquired by the N&W from Marion west as an outlet for the original N&W from Columbus. Obviously that didn’t happen. So imagine a parallel universe where those export locomotives as well as much of the freight you saw coming east on the former Erie and turning south.
While heading to Salem, Va. I came upon a NS locomotive waiting for clearance to proceed in Elliston, Va. It was pulling 7 brand new locomotives destined for the UAE.
They haul those locomotives to keep from putting any miles on them before they get to where they’re going to, and that way it don’t take away from their warranty on the locomotives, but their standard gauge locomotives, but that’s what a railroad friend of mine that works for the railroad told me That’s the reason why they haul them
@timmyfrierson2684
Sorry about that, but you and "railroad friend" you put in front of you to shield you are liars.
These locomotives are BR BP-32, they run on broad gauge, which is 1676 mm, and need therefore to be tranported until they are in Bangladesh or India.
That’s the reason why they haul them
Very interesting , Triple Traction Motor sets Fore and Aft on all 5 . Very Short and on Narrower gage wheel sets .
Almost guaranteed to be EXPORT product .
Progressive Rail in Muncie, IN. My town.
@@beverlymichael5830 I’m going to try and get back down to Muncie next week and film any good spots I should check out?
Wow some of those straps on those tie downs over trainers didn't look very tight, would they ever stop to check?? Like a truck 🚚 driver would do? Awesome 👌 freight train 🚆 video 📹
@@trevorcooke8129 actually I believe they do every 100 miles or so and if they do have any loose straps the defect detector will catch it.
@@therailroadtiespiker thanks for that appreciate 🙏
Buffers and knuckle couplers... Did Australia order some new power?
That or india did
Bangladesh
+1 on them headed to Asia. At first I thought they were for VLI or MRS in Brazil but the paint scheme doesn’t match. Nice footage.
@@radiationroom thank you for watching
1:55 I hear jasson alason 😂
Hi The Railroad Tie Spiker & it's is Randy and i like yours video is Cool & Thanks The Railroad Tie Spiker & Friends Randy
@@randydobson1863 thank you Randy for watching
This NS 054 heading to Port of Norfolk, VA it came from Muncie, IN via Fort Wayne and Bellevue on the Fostoria District
I live in Muncie IN and yes Progressive Rail is a big employer.
Although it has been commented that these particular locos are bound for Bangladesh. There are numerous countries where narrow gauge is the standard such as Japan, New Zealand, Much of Australia ,Thailand ,Vietnam , Malaysia and South Africa. Plus many places in Europe also use narrow gauge for certain short lines
@@Michael-t3b5b I didn’t know that many countries used narrow gauge that’s really interesting.
These Locos arent narrow, they are broad gauge AKA 1676 mm.
Go figure.
Wow finally a KCS
They're GE 's probably going to Canada. If you look closely at the plastic covering, you can make out the hammerhead shape that are only on a GE.
actually a EMD
@@voidjavelin23 you can clear the outline of the hammerhead rear
@@RealMelodyBlue theres many people point out its a EMD
Quality filming!! I really appreciate your videos. Thanks
@@PatrickHeffernon thank you Patrick for watching
I love Marion Ohio for railfans. Always something to see & film! Loved the first intermodel. The light you had when filming was beautiful. Great selection of trains that day Ty! ❤😊👍
@@Carolb66 thank you so much for watching
their ITD isn't flashing
Awesome video again.
@@celioleitao7303 thank you for watching
Funny to see those Yellow Pup Trailers on that train as they shut down at the end of July 2023…
@@jamesmorton8431 UPS has been pulling them here in Indiana for a couple years now.
Absolutely LOVE the new intro with 4014 in B & W❗Thats how it was originally meant to be ❗
"Thats how it was originally meant to be" pretty sure the world was in color in the 40's just not the film lol
@@marengtech313 yes, youre correct on that one, i had no idea what color TV was until the 1960s, i just turned 74, and its a whole different world out there now.
@@marengtech313 Wait, so the British didn't invent color before Americans? Then why didn't we paint our steam locomotives in more vibrant colors!
@@marengtech313 AND, the 4014 was built to burn coal, not the oil it's burning now.
Nice! I caught a NS heading south/east through Columbus with 3 of these same locomotives. It was about six months ago.
That's a nice catch.
Because these locomotives are broad gauge and built by EMD, see the bogies and fuel tank, my thoughts also were Pakistan, India or Bangladesh, but others already confirmed that these are for Bangladesh.
That was good and different.
Nice Job Idk where thoso flat cars are going
Here's the scoop...
They're built by Progress Rail in Muncie and usually (not always) shipped to the Port of Morehead City here in NC for export. NS will bring down several of these a month from New Bern NC on NS train P90 or P97. The last outbound shipment left the Port about two weeks ago, headed to Mongolia.
The PRSX reporting mark is a dead giveaway.
@@ethanmcdowell9677 that’s cool I don’t live far from Muncie
must be great living close to busy tracks.
it takes me a hr to get to any tracks.
and then only twice a week. fuel and insurance costs.
@@larryjanson4011 yes it takes me over 4 hours to get to Marion Ohio to film trains.
I believe those are the new RTA engines for Chicago.
What date was this filmed? Realistically the loco's are GE or EMD, They're definitely narrow gauge and they may be going to Africa. Probably GEs since EMD would ship directly to Charleston,
@@robertdshannon5155 filmed in February of 2023 in Marion Ohio
Probably japan
I think they're US locomotives they have a US coupler. The rails sitting on flat cars seem to be in line with the rails below the train so I think they're US locomotives.
😂😂😂
That is not a US-Coupler, it is some crap for rcpotrt locos. In addition, US railways do not use buffers. The Number of the locos is BP-32, made by PR for Bangladeshi Railways.
India and Bangladesh are transitioning - slowly - to the USA coupler system. Looking closely under the coupler, one can see a dangling link for the older link-and-pin system; the two bumpers (buffers) are easier to see. All new engines on the Indian subcontinent have this either/or coupler arrangement.
Concerning gauge, at 18:17 the near shipping rail appears to be directly above the outer cap of the bearings of the flatcar wheels.
19:17 What was the bad idea ? 🤔 🤔
Old footage from last fall?
Yes, these locomotive types are GE - Alco derivative types and they ARE standard gauge.