thank you so much for this video! i was given an industrial machine and the thread broke right when i was about to use it. and this helped me re-thread it. you're amazing! thanks for being so thorough!
Hi, have you done a video on how to adjust the tension dials? I’m going crazy trying to find info on this machine. I can’t get the tension right. Thanks so much ❤
I think there’s a plastic screw at the top. Unscrew that and fill it with oil. On the front right side you should see a circle that shows how much oil is in there and there’s some lines on it. You Gotta stay between the lines I can’t member because It’s been a long time since I’ve used this machine.
Thanks Tammy for the kind words. I wonder if folks understand the power of words. God could have made this world using any power or force He wanted but He chose to use words to speak the earth into existence. I use a sewing machine to make things and God uses words, crazy right? The bible says “So a man thinketh so is he”. You got me thinking I’m BRILLIANT this morning and I’m so so grateful. 😄
I just purchased a brother ef4-b571. It is doing a 4 thread safety stitch and I would like it to do a mock safety stitch instead. Would you by any chance know why?
This was meant to be a one off video because some students asked me to do it. Sorry for not responding to your message but I just noticed you blessed me. I love blessings so I thought I’d say thanks. I need all the blessings I can get right now.
Hi, I have a Brother 600UL serger. I was using it and needle broke. It hasn’t worked since. Won’t “serge” and continues to break needles. Can you help?
Feel at bit guilty for not replying to some of your replies. If you still have this machine it could be a few things why it doesn’t work. If the knife has moved up or down it won’t cut neatly or not at all. If the knife is blunt and needs replacing it won’t cut. That knife has to be in exactly the right place. 3mm too high or low and you will have problems. If you tug or pull the fabric through it can break needles. Let the machine pull the fabric naturally. Main reasons needle break is if they are not in properly. Sounds silly but make sure the needles are pushed all the way up. Also If you use the wrong needles. If the garment got stuck and you were a bit violent pulling it out, a moving part may have been bent or thrown the timing out or moved the knife. Lastly if your needles or a needle is blunt you will struggle to get a neat stitch. Make sure your needles are nice and sharp. If it is none of the above it needs a service.
If you go to a sewing machine shop that deals with industrial equipment they will have the needles. Most of these Brothers are very similar and take the same needles.
You are so welcome. 🙏🏾 I also have another channel on Telegram If you’re interested. It’s about waking people up to the lies of the Matrix. You may not agree with everything however there may be some stuff you find fascinating. t.me/wakeupeverybody
Your thread may be loose because it is not threaded correctly. Open the little hatch and there should be a diagram on the inside with instructions on how to thread it. If that doesn’t work check the thread has gone between the tension discs probably. This is very important! Make sure your threads hasn’t gone behind the discs they must go between. This is another important one!!!!! With industrial overlockers they don’t like Cheap thread. With domestic it should be fine but DO NOT USE CHEAP CRAP THREAD!!!!! I recommend a brand called ‘Moon’. If your thread has no branding don’t buy it for industrial overlockers. Use those on your domestic machines only. If you think men are frustrating, use inferior thread for this machine and you will experience frustration on a level not yet known to mankind.
The video isn't really good. You can't follow and see the right movements so not clear it is. Sorry for the negative comment. The effort on your side is surely there
I'm a designer who's been let down by seamstress who's off sick, so I thought I would give it a shot!!
Very much appreciated!!
You are a BOSS for this… thank you soooo much I design carnival costumes and I’m self taught so I’ve survived watching videos like this THANK YOU!!!
You are so welcome
Wow you’ve just saved me (with the knot technique!) from hours of struggling to loop the yellow thread! 🙏 thank you!
thank you so much for this video!
i was given an industrial machine and the thread broke right when i was about to use it. and this helped me re-thread it. you're amazing! thanks for being so thorough!
Thank you for sharing this wonderful informative video. May God continue to bless you and your channel.
Thanks for the blessing. I like stuff like that. I most definitely receive it. If you got any more spare I will take them all off your hands. 😃
Saved me from a melt down, thankyou so much.
Hi Suzi
Glad you got something out of it. That model is a bit awkward to thread but its a very good machine.
this video start to finish is genius ty so much!
Thanks you’re so welcome 😉
Nice one. great clear explanation of what could be really frustrating. Legend
Hi, have you done a video on how to adjust the tension dials? I’m going crazy trying to find info on this machine. I can’t get the tension right. Thanks so much ❤
Çok güzel. Tam detaylı gösteriyor.. Teşekkür ediyorum
I think there’s a plastic screw at the top. Unscrew that and fill it with oil. On the front right side you should see a circle that shows how much oil is in there and there’s some lines on it. You Gotta stay between the lines I can’t member because It’s been a long time since I’ve used this machine.
*i like how u do the second thread!!! So nice idea!!!*
Would you able show me how often and to maintain to change the oil for that overlocker machine please, thanks tutor
Can you kindly show me how you oil this overlok machine?
You are brilliant THANKS!
Thanks Tammy for the kind words. I wonder if folks understand the power of words. God could have made this world using any power or force He wanted but He chose to use words to speak the earth into existence. I use a sewing machine to make things and God uses words, crazy right? The bible says “So a man thinketh so is he”. You got me thinking I’m BRILLIANT this morning and I’m so so grateful. 😄
thanks!!! and from Brazil
Thank you very much for this video I was seriously struggling
Very informative . Excellent.
Gracias por toda su ayuda, bendiciones
More blessings. I can’t get enough blessings. Please keep them coming.
Please if you can also tell how to oil and service a industrial overlockers.
Any one else still not able to find a video to make the chain actually chain
I just purchased a brother ef4-b571. It is doing a 4 thread safety stitch and I would like it to do a mock safety stitch instead. Would you by any chance know why?
Esta interesante el video pero muy movido casi no se mira
Hi there, just wondering, what needle does this overlocker use?
Como se enebro una overlock MA4-B661 industrial
How much can I get d overlocking marching
thank u i was doinggg it so wrong amazing helpfull
Bless you for sharing!
This was meant to be a one off video because some students asked me to do it. Sorry for not responding to your message but I just noticed you blessed me. I love blessings so I thought I’d say thanks. I need all the blessings I can get right now.
Hi, I have a Brother 600UL serger. I was using it and needle broke. It hasn’t worked since. Won’t “serge” and continues to break needles. Can you help?
Feel at bit guilty for not replying to some of your replies. If you still have this machine it could be a few things why it doesn’t work. If the knife has moved up or down it won’t cut neatly or not at all. If the knife is blunt and needs replacing it won’t cut. That knife has to be in exactly the right place. 3mm too high or low and you will have problems. If you tug or pull the fabric through it can break needles. Let the machine pull the fabric naturally. Main reasons needle break is if they are not in properly. Sounds silly but make sure the needles are pushed all the way up. Also If you use the wrong needles. If the garment got stuck and you were a bit violent pulling it out, a moving part may have been bent or thrown the timing out or moved the knife. Lastly if your needles or a needle is blunt you will struggle to get a neat stitch. Make sure your needles are nice and sharp. If it is none of the above it needs a service.
Thanks for the video, my problem is finding needles mine are shorter than the ones at walmart, joAnns or michaels :''-(
If you go to a sewing machine shop that deals with industrial equipment they will have the needles. Most of these Brothers are very similar and take the same needles.
@@spiritualfashiontutorials8133 is there an online store trusted to just order them in bulk? And is there only one type of needle?
So thankful Thankyou
Thamk you🌷
You are so welcome. 🙏🏾
I also have another channel on Telegram If you’re interested. It’s about waking people up to the lies of the Matrix. You may not agree with everything however there may be some stuff you find fascinating.
t.me/wakeupeverybody
Where are you based? Failed to thread my machine😢😢😢
I’m in Vauxhall south London but I work in Croydon.
My thread is loose and I can’t get it to tighten do you have any tips?
Your thread may be loose because it is not threaded correctly. Open the little hatch and there should be a diagram on the inside with instructions on how to thread it. If that doesn’t work check the thread has gone between the tension discs probably. This is very important! Make sure your threads hasn’t gone behind the discs they must go between. This is another important one!!!!! With industrial overlockers they don’t like Cheap thread. With domestic it should be fine but DO NOT USE CHEAP CRAP THREAD!!!!! I recommend a brand called ‘Moon’. If your thread has no branding don’t buy it for industrial overlockers. Use those on your domestic machines only. If you think men are frustrating, use inferior thread for this machine and you will experience frustration on a level not yet known to mankind.
thank you very much.
Thank You!!!
Segui você coloquei todos fios mas o segundo fio estoura muito solto todo aí vou apertando aos poucos mas estoura
Thank you🙏🌟🌟🌟
Ty brother ;)
Do you know if this machine can sew swimwear?
watar pump siting
The video isn't really good. You can't follow and see the right movements so not clear it is.
Sorry for the negative comment.
The effort on your side is surely there
the video is terrible