Very nice video sirjee, i have a query not related to this topic but related to injector issue, in one of the your video comments, you mentioned that ki injector ka issue timing belt galat set karne se bhi ata hai, meri storm 2013 model me injector ka issue aa raha hai and Maine last month hi timing belt change karaya hai, can you throw some light on this, or please let me know if there is any way to reach out to you, great thanks
I think it's a critical way to change fog lights..simply pull it out fog lights cover use tester screw driver. And two screws in fog lights bellow use t20 driver it ll easily come out n change led
can you please do the same thing with your safari and make a video about it,i think safari uses h3 setup and you can do the same in Safari as well.Please make a video about that as well.
Sir i have h3 leds with me , but the problem is that , if we put led in safari then , back cover or dust boot of the fog housing can not be fitted and within days dust will collect inside and ruin the fog light housing itself. So better option is either a halogen or a retrofit hid so that it can sit inside without tempering the dust cover
@@yourDIYneeds Sir one more question, what is the wattage of bulb used in safari headlights by factory OEM,and can we install Philips rally 130/100 watts halogen bulbs in Safari without using any relay,or will it affect the wiring, please reply.
Depends , as of now we are not able to produce the led chips here , the chips which produce light comes either from china or korea then the rest of the assembly can be manufactured anywhere
Sir one more question, what is the wattage of bulb used in Safari dicor headlights by factory OEM,and can we install Philips rally 130/100 watts halogen bulbs in Safari without using any relay,or will it affect the wiring, please reply.
Sir stock is 55/60 you can swap them for 130/100 without using any relay because the factory headlights also works through a relay , so it would be waste of resource to add a relay over another relay
Are you satisfied with the intensity of light emanating from the H7 LEDs in the High Beam? As I've tried a few LEDs and HIDs in the high beam and the LEDs seem to protrude a little out the barrel and reduce the light dispersion. Whereas HIDs seem to replicate Halogen's pattern, losing out on the utility of Pass light as it takes time to fire-up.
Namaste bhaiya meri vw vento 2013 hai isme iske foglamp mein 35w ka bulb hai .kya isme 65watt ka bulb dal du koi dikkat toh nahi hai without relay. Bhaiya front door seal ka kuch alternative batao bhaut mehngi hai seal.
Sir light 35w ke hissab se design hai to usme 55w daal ke light to jyada ho jaegi , but thode time ke baad reflector burn ho jaega Door ka seal ka to koi alternative nahai hai sir
@@yourDIYneeds thankyou bhaiya suggestions Dene ke liye . Bhaiya outer aur inner tie rod RANE company ke kaise hai . Kya wah vw ke steering related product banati hai ?
@@yourDIYneeds Yes Sir, Online at Boomdo the LuK set(Clutch disk,Plate and Release Bearing) costs rs 8000 ,and Tata is 9500, and at local garage or gomechanic ,Labour charge is 4000-4500. At Tata ACS ,they say the whole job with spares is 18000..I can put the car in 3rd gear and take the vehical plus at 3rd gear my vehical struggles to reach 55 -60.So definately it needs clutch overhaul Sir.
Yes sir , seems like clutch is slipping , Can you see the rpm rising but not speed while acclerating harder . Or any kind or jerks when vehicle is under load ?
@@yourDIYneeds Yes Sir jerk and hesitation at 3rd.I encountered another problem too,i recently changed gear oil but now at 1st and 2nd gear, while relesing clutch,there is this squeaking sound..even in third..its sounds like bad belt pulley sound but it dosent come when clutch is engaged or in neutral.somedays when car gets heated ,this sound is not there.
Hello Brother, Your all video's are really informative 🙏 I wanted to share a problem I am getting in my 2013 Highline Polo Petrol 1.2 Manual, when I go uphill mostly in 3rd Gear, I hear some knocking sound from engine bay not sure if it's from engine, once I shift the gear mostly it goes away and this happens only when I go uphill. Can you share some inputs what it can be, I am in a remote area nowadays no machenic nearby. Please reply to me bro, if I should be writing you somewhere else please share your email address.
Sir , this is not duplicate 😅😅 , all of these are manufactured in china and then various companies pick them up and stick their name on it and then sell . So they all are same
Sir to be true , whenever i look for a led bulb , i never focus on brands , what i focus on is construction and chipset used for the led , and these bulbs have seoul y19 chips which are being used in 99% of the led bulbs , they are tried and tested for output and balance
Nice video bro.... You can remove the fog lamp from front also without removing the headlamp.
Thanks for sharing the correct Led angle. 99% of installers don't care about the LED position and cause a huge glare to others
Very nice video sirjee, i have a query not related to this topic but related to injector issue, in one of the your video comments, you mentioned that ki injector ka issue timing belt galat set karne se bhi ata hai, meri storm 2013 model me injector ka issue aa raha hai and Maine last month hi timing belt change karaya hai, can you throw some light on this, or please let me know if there is any way to reach out to you, great thanks
I think it's a critical way to change fog lights..simply pull it out fog lights cover use tester screw driver. And two screws in fog lights bellow use t20 driver it ll easily come out n change led
Sometimes those plastic covers can become brittle with time and their locks can break , and then it will become a bit more expensive 😅
Yes, my car came with a Hook for pulling the Fog Covers out.
Hey buddy ,nice video❤️
Which led bulbs are you using in headlights and foglights?
Sir its cristal h7 in low beams , h7 in high beams
And h8 in fogs all crystal
Which has Seoul y19 led chips , 12 chips per bulb
can you please do the same thing with your safari and make a video about it,i think safari uses h3 setup and you can do the same in Safari as well.Please make a video about that as well.
Sir i have h3 leds with me , but the problem is that , if we put led in safari then , back cover or dust boot of the fog housing can not be fitted and within days dust will collect inside and ruin the fog light housing itself.
So better option is either a halogen or a retrofit hid so that it can sit inside without tempering the dust cover
@@yourDIYneeds Sir one more question, what is the wattage of bulb used in safari headlights by factory OEM,and can we install Philips rally 130/100 watts halogen bulbs in Safari without using any relay,or will it affect the wiring, please reply.
@@themaster5746 just go with the relay why u wanna take the risk ??
i started using them recently but fog lights are mandatary for ease of drive.
Sir safari has a relay system for headlamps from factory , so there is no point of adding a relay over the other
It will be waste of resource.
Thanks. Quite detailed
any Diy on headlights repairing cos the top ribbits or hinges lingment spacer nuts or where the screws are attached they break
Night trial video is must please upload 😄
Great job 👌
Pls provide link for all bulbs.
Bought offline sir
@@yourDIYneeds one last question which is my main concern.
Is it a Chinese product?
Depends , as of now we are not able to produce the led chips here , the chips which produce light comes either from china or korea then the rest of the assembly can be manufactured anywhere
Your suggestion for headlights upgrade, dual beam 2015 system for both low and high beam
Sir there are different brands of leds , so go for a good throw led for hugh beams and a HID unit for low beam
Very good
Sir one more question, what is the wattage of bulb used in Safari dicor headlights by factory OEM,and can we install Philips rally 130/100 watts halogen bulbs in Safari without using any relay,or will it affect the wiring, please reply.
Sir stock is 55/60 you can swap them for 130/100 without using any relay because the factory headlights also works through a relay , so it would be waste of resource to add a relay over another relay
Are you satisfied with the intensity of light emanating from the H7 LEDs in the High Beam?
As I've tried a few LEDs and HIDs in the high beam and the LEDs seem to protrude a little out the barrel and reduce the light dispersion. Whereas HIDs seem to replicate Halogen's pattern, losing out on the utility of Pass light as it takes time to fire-up.
Yes u have LED all around sir , low beams are good and fog lamps even add to the low beams , high beams are instant
Buy Osram light it's best
Hello Sir,if u can change Tata Safari Dicor it would be great.
Also have a video on fog lamps on safari sir , please check
Please make a video for Safari Dicor Fog Lamps Front and Rear .
Sir front fog lamps ki video alredy hai
Namaste bhaiya meri vw vento 2013 hai isme iske foglamp mein 35w ka bulb hai .kya isme 65watt ka bulb dal du koi dikkat toh nahi hai without relay.
Bhaiya front door seal ka kuch alternative batao bhaut mehngi hai seal.
Sir light 35w ke hissab se design hai to usme 55w daal ke light to jyada ho jaegi , but thode time ke baad reflector burn ho jaega
Door ka seal ka to koi alternative nahai hai sir
@@yourDIYneeds thankyou bhaiya suggestions Dene ke liye .
Bhaiya outer aur inner tie rod RANE company ke kaise hai . Kya wah vw ke steering related product banati hai ?
Good job sir
Safari ke alignment aur sim installation ke video upload karo bro
Bro 2011 model vento mein....2016 model ki headlights lag sakti hain..????..bcz maine check kiya tha...coupler diffrent hain dono ke...
Electrical connectors can be modified easily with help of a solder iron
Agar body shape me fit hai , to ho jaegi
@@yourDIYneeds yes brother body shape mein toh fit hai..but 2011 mein 1 bulb holder shape tha nd 2016 mein 2 holder bulb shape hai..isilyae doubt tha
Ho jaega sir
Wonderful
Which headlights are used in vento h7,h10,h11?
Low and high beam - h7
Fog - h8/h11
hi sir
can you tell me where to buy vento door rubber and exterior plastic trims in delhi
Sir kashmir gate
sir tata safari dicor vich fog lights vich LED kive fit kre eh ??
Sir , mat try karna led , poori fog light khrab ho jaegi ,
Fog light h3 hai usme jageh hi nahi hai led ki
@@yourDIYneeds sir co-driver side ki khrab hai bulb pya o Or led ??? suggest me
Sir best is ki aap HID fitt karwa lo , sahi rahegi
@@yourDIYneeds HID with projectors or how ??
can we go for bixenon 3 inch projectors can we cut the bumper and fix them??
hey Sir , will u do a project like changing the clutch plates of Tata Safari ? Is it possible.
Sir its a 3 person job or atleast 2 person , but will definately shoot a video if a got a chance
@@yourDIYneeds Yes Sir, Online at Boomdo the LuK set(Clutch disk,Plate and Release Bearing) costs rs 8000 ,and Tata is 9500, and at local garage or gomechanic ,Labour charge is 4000-4500. At Tata ACS ,they say the whole job with spares is 18000..I can put the car in 3rd gear and take the vehical plus at 3rd gear my vehical struggles to reach 55 -60.So definately it needs clutch overhaul Sir.
Yes sir , seems like clutch is slipping ,
Can you see the rpm rising but not speed while acclerating harder . Or any kind or jerks when vehicle is under load ?
@@yourDIYneeds Yes Sir jerk and hesitation at 3rd.I encountered another problem too,i recently changed gear oil but now at 1st and 2nd gear, while relesing clutch,there is this squeaking sound..even in third..its sounds like bad belt pulley sound but it dosent come when clutch is engaged or in neutral.somedays when car gets heated ,this sound is not there.
Sir that sound is maybe from dry shaft of slave cylinder , or the ball pindal of the slave , very common issue
Is h8 and h11 holder same?
Just reversed in polarity
Bro type of fog light for vw 2012 tdi
Sir it uses a h8/h11 bulb , they both are same , except for the polarity of connector , connector can be flipped
bro, can u help to fix recirculation flap motors in vw polo. the lower vent is not functioning i mean the motor is not moving at all.
just watch the ac fan blower cleaning video and open the fan motor motor then the recirculation flap is just behind the fan unit
@@yourDIYneeds yes i open dashboard n i see the motors is not fully functioning .
@@yourDIYneeds if u have the video on recirculation flap motor pliz send me the link.
@@yourDIYneeds o sorry i got the video. let me check
Sir i have vento old model single reflector headlight can we install double barrel headlight?
Yes , but it depends on the wiring loom fir connection
@@yourDIYneeds sir connection kaise karna hai aapko koi idea hai ?
Yes sir ,
@@yourDIYneeds sir possible ho to video jarur banana.
Sure sir
Sir second gear hard ho gyi hai eski kya reason hain
Shifter mechanism ko lubricate kar lijiye sir
Bro where are you from
Sir delhi
Where is your shop?
No shop sir
Which led fog light bulb r u using?
Sir its h8/h11
@@yourDIYneeds which led fog light bulbs, and led tail light bulb will fit in 2014 polo?
Fog - h8/h11
Indicators - BAU15s
Brake light - BAU15
Parking front and rear - T10
Headlamps low - h7
Headlamp high - h7
@@yourDIYneeds sorry bro 2013 polo.
Sir if you have a highline , then its same , but if you have a baseline or comfortline then headlight are common and has a h4 bulb
Rest is similar
Hello Brother, Your all video's are really informative 🙏 I wanted to share a problem I am getting in my 2013 Highline Polo Petrol 1.2 Manual, when I go uphill mostly in 3rd Gear, I hear some knocking sound from engine bay not sure if it's from engine, once I shift the gear mostly it goes away and this happens only when I go uphill.
Can you share some inputs what it can be, I am in a remote area nowadays no machenic nearby. Please reply to me bro, if I should be writing you somewhere else please share your email address.
Also this sound starts once car ran 5-8 km
Sir This sounds like , you arr lugging the engine , if your speed is less than 30-35 then you need to be in 2nd , 3rd is too tall for the incline
@@yourDIYneeds ok may be I am doing this, I will try what you suggested, Thanks for guiding 🙏
Bhai apse contact kaise kr sakte hai..?
Sir everydaydiyhelp@gmail.com
@@yourDIYneeds thanks bro
This is Duplicate night eye
Sir , this is not duplicate 😅😅 , all of these are manufactured in china and then various companies pick them up and stick their name on it and then sell . So they all are same
You can check different between original and copy
Sir to be true , whenever i look for a led bulb , i never focus on brands , what i focus on is construction and chipset used for the led , and these bulbs have seoul y19 chips which are being used in 99% of the led bulbs , they are tried and tested for output and balance
Ok sir
I am a small UA-camr please please please help me for making you like UA-camr