Super Awesome! I hardly will comment on here. This Guru made it simple as ever. Giving the PINS numerical values of 1-16 made it Easiest for any newbie! In 6 mins All Understood! I had to share this video with my STEM students! Great Work! Namaste!
Thanks so much! for years I've wanted a working LCD screen! thank you for helping me with this video! many thanks! I've also found a way to put different text on the screen, look at the code, it will say ("Hello World") then just change the text. like so here ---> ("Your text here") then whatever you put in the code it will say! just a quick tip. thank you! 👍 😀
my lcd panel is only glowing in green light and I am not able to even see any blocks inside the lcd..after uploading the code , nothing is being changed on the lcd .. can someone help me?
Thanks a lot Thianesh INDIAN AERO! I do have a potentiometer but your suggestion to move my pin to ground worked regardless. My screen was blank at first, but I replaced one of the 5 volt connections to my potentiometer with a ground connection and it displays "hello, world!" now. It has a blinking text cursor, although the text doesn't blink. Not sure if it's 100% working right now, but a huge improvement.
Its your choice, you can even do it in vertical lines as well where the led has been connected, check a tutorial on "current flow in breadboard" and you'll understand
If u are less busy....I need lcd display for project........a speaker.....so I need to display the following Name of speaker Model Battery level Charging indicator
I replaced one of my 5v pins to my potentiometer with a ground pin. The LCD screen displays "hello, world!" now. it doesn't blink though, so no promises your project will be perfect if you try what I tried. Good luck!
Finally after several tutorials, I got my LCD working! Thank for your simple and informative explanation. Great video.
what's value of ur trimpot and resistor .bro?
Super Awesome! I hardly will comment on here. This Guru made it simple as ever. Giving the PINS numerical values of 1-16 made it Easiest for any newbie! In 6 mins All Understood! I had to share this video with my STEM students!
Great Work! Namaste!
I have to admit i was struggling with this on my senior project, thank you for this helpful tutorial. :)
Thanks so much! for years I've wanted a working LCD screen! thank you for helping me with this video! many thanks!
I've also found a way to put different text on the screen, look at the code, it will say ("Hello World") then just change the text.
like so here ---> ("Your text here") then whatever you put in the code it will say! just a quick tip. thank you! 👍 😀
thank you bro bcoz of u I got 7th rank in my school project
Thank you so much I finally got my lcd working!!
I was struggling with this from a very long time, finally did it , Thank you
अतिशय मनोरंजक आणि उपयुक्त ट्यूटोरियल
This is became very simple by your explanation
I made mine say Hello!, with your tutorial!! Thank you so much!!
PIN 1 》GROUND
PIN 2 》POSITIVE
PIN 3 》10K POT
PIN 4 》A12
PIN 5 》GROUND
PIN 6 》A11
PIN 11 》A5
PIN 12 》A4
PIN 13 》A3
PIN 14 》A2
PIN 15 》220 Ω
PIN 16 》GROUND
Thank you Sir, Finally seeing this video and trying to do the experiment it worked😊
can you plz help bro. I followed all your instruction to connect everything but my lcd is not displaying any character on the screen
Rotate the potentiometer knob
Creative Stuff How do you do that? I’m even trying to adjust the brightness on the screen but it’s not working
@@alimahamud9 Sam's here:(
@@CreativeStuff it's not working
Thanks al lottttttt brother. You saved my project 🤩🤩🤩🤩🤩🤩🤩🤩🤩👍👍👍👍👍👍
Thanks for this bro, I hope it works, you made it really clear and easy bto understand. I apprec iate it bro.
my arduino turns off if I connect 5V and ground to my breadboard. what should i do?
very nice tutorial, real helped a lot
😄😄😄😄😄😄😄😄😄
Thnx
Clearly explained. Neat quick and simple... hats off to you...
@Rathi Kaliappan yes 👍🏻
my lcd panel is only glowing in green light and I am not able to even see any blocks inside the lcd..after uploading the code , nothing is being changed on the lcd .. can someone help me?
Did you find out why?
We have to include library or not.
If we have to use means which library we have to use
Or not
NOTHING HAPPENING JUST LCD TURNING ON NO TEXTS ON SCREEN
Rotate the potentiometer knob
Thankyouuuuu sooo muchh !! you helped me a lot !
If incase anybody didn't have a potentiometer connect that pin to GND not 5V it will work good..
Thanks a lot Thianesh INDIAN AERO! I do have a potentiometer but your suggestion to move my pin to ground worked regardless. My screen was blank at first, but I replaced one of the 5 volt connections to my potentiometer with a ground connection and it displays "hello, world!" now. It has a blinking text cursor, although the text doesn't blink. Not sure if it's 100% working right now, but a huge improvement.
which pin?
how can i connect it together with fingerprint sensor module such that the LCD can display sensor records
Thank you it was of great help in learning the LCD connections
wow, so nice video, keep it up!!
It is good project i made it it works but the coding my freind so i had a question that how much text we can type which will display on the lcd screen
make a video on Arduino nano programming for R2S15902FP 6CH Volume control
Thanks, very well explained
This is exactly what i wanted... NIce one bro
Please give the code in Description( Copy and peste)
شكرا لك يا اخى ❤❤
استمر
what does pins 5,4,3,2 do on arduino when connected with lcd
Thank u but display is not visible to me even after changing potentiometer knob why??
technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html
you will get code file
it will guide you
Check your soldering. It might be shorted.
how to determine which side of breadboard for positive and negative connection?
Its your choice, you can even do it in vertical lines as well where the led has been connected, check a tutorial on "current flow in breadboard" and you'll understand
mine still not working. Help me please
technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html
you will get code file
it will guide you
contc me
How can we get date and time on LCD display
can you use this for timer ?
Why my arduino board going in protection?
If u are less busy....I need lcd display for project........a speaker.....so I need to display the following
Name of speaker
Model
Battery level
Charging indicator
Can I do without soldering
Good explanation 👍🏻
my lcd doesnt show "hello world"
I'm getting errors when I uploaded code
Thank you so much
Please make footstep power generation system
Good tut 👍👍
Thank you man
Sir I have connected the pins but lcd Is not printing anything. I am using arduino nano.
Rotate the potentiometer knob
technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html
you will get code file
it will guide you
Thanku very much sir
shall we use the 5k potentiometer instead of 10k
kk no prblm
technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html
you will get code file
it will guide you
What do you call the pins that you soldered on the LCD display?
Male Header pins
technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html
you will get code file
it will guide you
Thanks bro but what if we have given 3.3V instead of 5V
That should be fine or else if ur lcd uses more than 3v then you'll need relay switch to power your LCD from external power supply
My lcd is showing nothing why is it so please reply me
I replaced one of my 5v pins to my potentiometer with a ground pin. The LCD screen displays "hello, world!" now. it doesn't blink though, so no promises your project will be perfect if you try what I tried. Good luck!
@@PecanWoodPaper thanks buddy
I love you!
mine is diplaying solid block.. not word
Rotate the pot knob
@@CreativeStuff same it just blocky stuff on 1st line.. idk what happened
@@DanialADHOfficial if your remember, could you tell what worked for you?
@@sammy7448 i buy the new one.. maybe mine is faulty board unit
Bro mine is not working
Nice tutorial ✌☺
❤❤❤❤
🎉
nice
Does this work on all kinds of LCD?
No
It will work with other type LCDs with some change in code according to the LCD module
please give the code here.
sir, where to connect pin 5
Gnd
Connect Pin 5 To Negative rail
Please can we partner for a project
i am getting errors
thanks
Please give the code
Bhupendra jogi
Hello buddy
This is make bu Arduino Uno r3 damage
technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html
you will get code file
it will guide you
code???
Watch the full video,you will find the code
down load here ..scroll down the post
technoelectronics44.blogspot.com/2020/08/16x2-lcd-display.html
you will get code file
it will guide you
Code😅
Undecipherable gibberish.
:(
thank you so much
Code??
In the arduino library