thank you for the video , specially 0.34 taking off the plastic piece, we had the same difficulty and we needed 4 hands to take it off. Regards from Francisco Alvarez, Argentina
Thanks for the video. I bought one of those. When I put all the parts together, there was one part, P/N 9983181, known as "Caddy Adaptor S Line", that was left out. Do you have any idea where it should go? On the parts diagram, it is Ballon #7. Thanks.
I truly enjoy your videos. Your information has been very helpful. The jets by the steps of the pool are not working. All other jets that are inside of the pool work fine. Please help!
Dkoneify remove the filter and turn the system on and see if the Jets start working. The Jets that aren't working are probably the furthest from the pump, removing the filter will allow much more flow back to the pool and should get those jets pumping. may need a filter cleaning or replacement if this solves your problem
Beau is a pool guy so he knows what he is talking about. I am wondering if it is something you just noticed or they have always had low return pressure?
Beau Ferguson Thanks for the information. I forgot to mention that I have a sand filter. The name of the company is sta rite and the model # is t-240bp-1
No way the short screws that came with it will go through the handle - even without the plastic, they are not long enough to go through the front holes
Your son is amazing. Bright kid..God Bless..
Came here for the instruction, stayed for the model boats. 10/10 video.
thank you for the video , specially 0.34 taking off the plastic piece, we had the same difficulty and we needed 4 hands to take it off. Regards from Francisco Alvarez, Argentina
Happy 4th. The girls are enjoying a crystal clear pool thanks to your videos!
Happy 4th too you also! Thanks for the post! 👍
Better than Maytronics official video 👍. Hi from Australia 🙂
Did you have any issues screwing the the two screws from the metal arm that slides onto the bottom part? The holes don’t seem to match up on mine
A little tough.
we had the same issue. We solved it smashing down softly the metal piece and then the screws fitted in. No violence but a bit
Thanks for the video. I bought one of those. When I put all the parts together, there was one part, P/N 9983181, known as "Caddy Adaptor S Line", that was left out. Do you have any idea where it should go? On the parts diagram, it is Ballon #7. Thanks.
0:17 - I can see yours seems to come with this part pre-installed. I figured out - It simply snaps into the base.
Great!
Do you know the difference on the S300i vs 30i?
To me they look about the same.
I truly enjoy your videos. Your information has been very helpful. The jets by the steps of the pool are not working. All other jets that are inside of the pool work fine. Please help!
Dkoneify remove the filter and turn the system on and see if the Jets start working. The Jets that aren't working are probably the furthest from the pump, removing the filter will allow much more flow back to the pool and should get those jets pumping. may need a filter cleaning or replacement if this solves your problem
Beau is a pool guy so he knows what he is talking about. I am wondering if it is something you just noticed or they have always had low return pressure?
Beau Ferguson Thanks for the information. I forgot to mention that I have a sand filter. The name of the company is sta rite and the model # is t-240bp-1
Are you going to help jr put a motor in those boats and make them rc (radio controlled)? Fun project!
Cool idea! 👍
Thank u so much
No way the short screws that came with it will go through the handle - even without the plastic, they are not long enough to go through the front holes
Not sure. Maybe they included the wrong screws?