NEW (i'sh)TRACTOR HAS ARRIVED? - INTERNATIONAL 574!!

Поділитися
Вставка
  • Опубліковано 16 лют 2020
  • The New Tractor Has Finally Arrived. Its A (International 574) Which Is Rated To Be 68hp. We Bought It To Run The Baler And Mainly Help Out When We Require 2 Or More Tractors.
    Thanks For Watching!
    New Video Next Week (Fingers Crossed)!
    Follow Me On Social Media!
    Follow Me On Instagram!
    / gloverangus
    Follow Me On Twitter!
    / glover_angus

КОМЕНТАРІ • 64

  • @bonsallagriservices8875
    @bonsallagriservices8875 3 роки тому +3

    I’ve got a 674 it’s a belter on the road just need to find a set of quicke brackets same as yours

  •  3 роки тому +3

    The fuel gauge on all old International is looking into the tank 😂

  • @davidwhittredge3416
    @davidwhittredge3416 4 роки тому +1

    Glad to see a video from you it’s been awhile. Good one.

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому

      Thank you, aye it had been a while but I'm trying to get back into it now

  • @donvoll2580
    @donvoll2580 4 роки тому +4

    Good day from Ontario, Canada. Back in 70's when they first came out, I thought the world of them. Good speed on road, 8 spd scyr. & 2 spd pto. light work 1000 shaft running 540. Over here in winter they are hard starter, unless plug in. I think I,ll have to sub, to see more. Where are you? Thanks

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      Thank you👍 yeah it's a good tractor and like you said it has a good road speed. Our farm is on the west coast of Scotland near campbeltown.

  • @goldfire1676
    @goldfire1676 4 роки тому +2

    Great video best of luck with it

  • @djdfarminglife731
    @djdfarminglife731 4 роки тому +1

    Great vid hope the tractor dose you well

  • @colmkennedy3109
    @colmkennedy3109 4 роки тому +2

    Good video Angus 👍🏻

  • @ianinnes8063
    @ianinnes8063 3 роки тому +2

    Canna go wrong we an auld nash hardy auld things nae heaters brakes or clutch if its a loader tractor but shel be a handy machine

  • @EoineyMTX125
    @EoineyMTX125 4 роки тому +1

    Lovely tractor always wanted a 574

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому

      Oh I know, it's a really nice tractor to have around. Sometimes it's nice to drive something that's just simple to use

  • @johnthejoiner25
    @johnthejoiner25 4 роки тому

    the parking stand to remove loader clips on to loader arms not bolted in to frame to remove you need a bucket or grab to set it down and you need to tie the frame round the bonnet to the loader arms to stop it falling when parked if you dont its a nightmare to refit

  • @AndrewGoyallt
    @AndrewGoyallt 4 роки тому +1

    I would say the smaller tyres will be better because you could get into smaller places. Yes you were right with taking the loader off. Great vid

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      Thank you, aye unfortunately it didn't come with stands to take the loader off so it looks like i'm going to have to make some

  • @NicksFarm
    @NicksFarm 4 роки тому +1

    Great tractor,

  • @henrymckay731
    @henrymckay731 4 роки тому +3

    They were a pocket rocket but they needed the proper oil in the back end and the right coolant in the radiator. Handbrakes were a nightmare to keep right. Other than that very capable game little tractor.

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      It'll always live in the shed when not being used. I think itll be more capable than it looks for sure👍

    • @henrymckay731
      @henrymckay731 4 роки тому

      @@AngusGloverVlogs the proper coolant help's the liner's from going in them.

  • @samthomas3021
    @samthomas3021 2 роки тому +1

    My dad has one and it never had doors on

  • @markrussell9719
    @markrussell9719 3 роки тому +1

    I have the 674 with quickie loader she will serve you well.

  • @jerryodriscoll3691
    @jerryodriscoll3691 4 роки тому +1

    Watch out for issues with the hydraulics 👍 good luck with her lad

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      Thank you. Its no doubt going to give some bother with different things here and there but that's to be expected on a tractor of that age.

  • @togetrain4403
    @togetrain4403 4 роки тому +1

    There a brilliant peace of kit I have one my self a ih574 q can they are good old workhorse

  • @modelfarmer6710
    @modelfarmer6710 4 роки тому +2

    nice tractor the previous owner kept it well its nothing like my 584

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому

      The previous owner kept it well maintained and used it for work not just show. What's your one like

    • @modelfarmer6710
      @modelfarmer6710 4 роки тому +2

      @@AngusGloverVlogs mines not well kept but is kept in shed the whole time needs new tyres

  • @adamhoulihan5733
    @adamhoulihan5733 4 роки тому +1

    Not what I was expecting

  • @williamwells7775
    @williamwells7775 4 роки тому +2

    you can get euro 8 headstocks for them older loaders

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому

      Aye, I was looking at them the other day. Might look at getting one👍

  • @calumanderson5617
    @calumanderson5617 4 роки тому +1

    We've got one, an 1974 model same Quickie 3260 loader, ( we don't trust the loader stand, Not Quickie's best idea! ) same hours as ours but noisy cab and jealous yours has the loader joystick! 😆

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      Our one is a 1976 model. When we took the loader off we just lay it on the ground rather than using a stand👍

    • @calumanderson5617
      @calumanderson5617 4 роки тому

      Good move.. 👍don't know what Quickie were thinking of the design at the time?🤔

  • @alasdairmeredith2711
    @alasdairmeredith2711 4 роки тому +1

    You can buy an adapter plate for the loader for 300 quid

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому

      Aye I was looking at them the other day, I'll have a think about getting one

  • @gilbertroberts5784
    @gilbertroberts5784 4 роки тому

    Just make an adapter that fits to Euro 8 attachments

  • @martinvermeulin2232
    @martinvermeulin2232 3 роки тому +1

    We have an 574

  • @philipoconnor2236
    @philipoconnor2236 4 роки тому +2

    They were a great tractor. As far as l know she has a perkins engine. Body seems very tidy and great little loader. Was she local or how ye stumble upon her?

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      I haven't looked to see yet if it has a perkins engine in her but the body work is in a very tidy condition only with very minor rust spots on the bottom of the door. We came across her when we were speaking to the dealer about originally replacing the case farmall but they had that in stock so we bought it and decided to keep the case for another 2 or 3yrs.

    • @philipoconnor2236
      @philipoconnor2236 4 роки тому +2

      @@AngusGloverVlogs actually l'm wrong. It was the IH 475 that had the 212perkins same as big block mf165. Not sure what's in yours

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      @@philipoconnor2236 our other 2 574 have perkins engines in them so I would guess that one will aswell

    • @davieanderson3856
      @davieanderson3856 4 роки тому

      475 is Perkins rated at 60 horsepower 574 has the IH D239 engine rated at 67 horsepower

    • @EoineyMTX125
      @EoineyMTX125 4 роки тому

      475 was the only one from that range with a Perkins

  • @davidnicolson6443
    @davidnicolson6443 4 роки тому +2

    They do not make tractors like they used to goodness I am wounding like my father

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      All the fancy electrics on the modern tractors are great, but sometimes its nice to drive the older models with a manual clutch and a gearstick.

    • @davidnicolson6443
      @davidnicolson6443 4 роки тому +2

      @@AngusGloverVlogs easier to fix to

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      @@davidnicolson6443 aye abit of wd40 and your off again

    • @johnlawless8059
      @johnlawless8059 4 роки тому

      Wellcome back , missed your videos , keep up the good work

  • @ianinnes8063
    @ianinnes8063 3 роки тому +1

    U payed far to much for it though . Thats way more than its worth .

    • @AngusGloverVlogs
      @AngusGloverVlogs  3 роки тому +1

      Aye I'm kind of thinking that aswell but even so everything is mechanically sound and is a handy thing to have

    • @johnmchardy4502
      @johnmchardy4502 Рік тому

      If its good mechanically its worth every penny

  • @mariadowling532
    @mariadowling532 4 роки тому +1

    Do you farm full-time? Would rather an MF tractor to be honest

    • @AngusGloverVlogs
      @AngusGloverVlogs  4 роки тому +1

      Hi, The farm currently is owned by my dad. I worked full time up until middle of December when decided to go and get a apprenticeship in the building trade so in the future if the farm ever became unprofitable I will have something to fall back on. But I still do evenings Monday-Friday and Saturday, Sunday. If we get a third tractor I would like to get a MF390 or MF399👍

    • @mariadowling532
      @mariadowling532 4 роки тому +1

      @@AngusGloverVlogsyeah we have a 135 165 and a 390T ,390T a great tractor pulls a 1350 gallon tanker runs a 8foot Kuhn mower . Never gives trouble it's our main tractor,it'll never leave our yard, only problem is it's 2wd!! Massey went downhill after 300 series in my opinion. Be careful if your buying a 390 non turbo , they can b hard to start sometimes

    • @DaveWuzHere
      @DaveWuzHere 4 роки тому

      @@AngusGloverVlogs a 390 was my dream a few years ago. Now I'm thinking of a 6290 or maybe a 6470+ I wouldn't buy another 2wd, sooner just keep what we have. I'm in the same boat, working full time and the farm is evenings and weekends