Thanks for the video. I spent hours trying to setup a nano ii motor as the zoom and the mirage vnd motor on the focus wheel. After watching this video I put the vnd motor on channel 6 and bam it worked.
Your stuff is great dude 😂 so, you don’t need the advanced ring grip transmitter to connect to the motor from the handle??? What’s up with that rubber thing on the top? I’m asking because I was about to buy that expensive Nucleus handle and I will hold off if I can use the ring grip handle! Thanks brother!
I connected the motors from the Tilta M/N to the Tilta Float remote. But a Tilta employee told me that in future firmware releases it will be possible to connect the nano motor 2 to the DJI Lidar RS
I have never heard that but that would be nice. But I also pretty sure I have plugged Tilta motor into second USB C port on DJI RS3 promoter and it worked but it only gives you 5 volts
@@camerariggingmods9667 Привіт! Дякую за контент, дуже корисно та пізнавально! Є питання по моторчику. Взяв собі такий і під'єднав до RS2. Живлення э, але адекватно не працює. Калібровка не працює зовсім, і в якийсь момент заглючує(( При тому що перший Nano споживав 7,4в і все було ок. Це у всіх так чи у мене щось не те? Через павербанк все чудово працює... Може треба щось підшаманити, а я не шарю?
Friend the old motor can be used together with the new one, share about this video? And is it really possible to adjust the focus in motion with the tilt knobs or is it very difficult? What do you think about the air 3 lidar, it has a maximum focus distance of 5 meters, what is the distance of the DJi lidar?
@@dans2833 ya I figured it out my only real complaint is you cant change the number on the original nano 😅 & the original nano is probably not gonna be focus as the new moter is more powerful 😅
Hi dude! Thank you for your insights and instruction video. I would like to ask what D-Taps you're use in this video, the orange one and the extension with USB, any links to their product page? Also, why does the D-tap have three pins? xD I'm unfamiliar with that. Cheers! - 🐧
Thanks for the video. I spent hours trying to setup a nano ii motor as the zoom and the mirage vnd motor on the focus wheel. After watching this video I put the vnd motor on channel 6 and bam it worked.
Your stuff is great dude 😂 so, you don’t need the advanced ring grip transmitter to connect to the motor from the handle???
What’s up with that rubber thing on the top?
I’m asking because I was about to buy that expensive Nucleus handle and I will hold off if I can use the ring grip handle! Thanks brother!
Can you mount the tilta nano II on the right side of a Rig if using a Left handed side Handle?
Awesome!Thank You
Hey man, thanks for this video. Your content is great! Can you tell me if it’s possible to connect Nucleus-M handle with new nano II motor?
I connected the motors from the Tilta M/N to the Tilta Float remote. But a Tilta employee told me that in future firmware releases it will be possible to connect the nano motor 2 to the DJI Lidar RS
I have never heard that but that would be nice. But I also pretty sure I have plugged Tilta motor into second USB C port on DJI RS3 promoter and it worked but it only gives you 5 volts
Also, Слава Україні, І привіт з Тернополя анд з Америки 🤪
@@camerariggingmods9667 О, знаю що ти українець і наче б то вірменин? Але думав, що народився в США і не знаєш української. А так сюрприз-сюрприз
👍🏾🙏🏾
@@camerariggingmods9667 Привіт! Дякую за контент, дуже корисно та пізнавально! Є питання по моторчику. Взяв собі такий і під'єднав до RS2. Живлення э, але адекватно не працює. Калібровка не працює зовсім, і в якийсь момент заглючує(( При тому що перший Nano споживав 7,4в і все було ок. Це у всіх так чи у мене щось не те? Через павербанк все чудово працює... Може треба щось підшаманити, а я не шарю?
Friend the old motor can be used together with the new one, share about this video? And is it really possible to adjust the focus in motion with the tilt knobs or is it very difficult? What do you think about the air 3 lidar, it has a maximum focus distance of 5 meters, what is the distance of the DJi lidar?
Yes it can but assignment can be weird 😅
@@dans2833 ya I figured it out my only real complaint is you cant change the number on the original nano 😅 & the original nano is probably not gonna be focus as the new moter is more powerful 😅
Sure, and thx. But that new wheel looks awesome. Why wouldn't we want that!?
Hi dude! Thank you for your insights and instruction video.
I would like to ask what D-Taps you're use in this video, the orange one and the extension with USB, any links to their product page?
Also, why does the D-tap have three pins? xD I'm unfamiliar with that.
Cheers!
- 🐧
Hey ! After the sony fx3 4.0 update it nano 2 wont work you have an idea how to work around thos
Try updating the firmware on your Nano 2