Nice, I thought you'd like this. It looks like they changed a few things from the Jakks one. I don't remember having to take the legs off to get the elastic around the apron like that, although I've had the different aprons from the Classic Deluxe figures set up overtop of the blue WM2 apron on mine for a long time. The mat on mine has always been loose like how yours is. Although, I know several people have found a way to mod it. I've even seen where people just stretch gray fabric over it and sew it underneath to stay form-fitting, then put the CSDA aprons on and you don't notice it at all. Glad this ring is better for you though, cool that the Mattel pads work on it too, always nice to have some cross-use out of things!
It took me FOREVER to figure out how to hook the Turnbuckles and Ropes together (on the Jakks Version) and your video helped tremendously,thanks very much!
@@BurnoutInc Actually I spoke too soon and am still having trouble. I have Cerebral Palsy which affects my Hand/Eye Coordination and Muscle Memory so it's tough to attach the Turnbuckle Hooks together while keeping the rope in the middle of the pad (even when I slow the Video down). If you could be of further help I'd really appreciate it
I have one of these rings on the way. I hope it is in good shape because I recently received a toy van from this same company and it not only came with a broken piece but also with no instructions on how to put it together.
I’m glad. It’s an awesome ring. If you ever get the chance, the old Jakks real scale accessories like the Hell in a Cell, Blue Wrestlemania cage and the elimination chamber fit this ring.
I usually put a 1/4" of foam under the canvas, so it stretches it out nicely and it's padded protection for your figures. Plus, I'd probably spray paint those posts and hand pant the corner slots the posts go into. Not sure how well the WSS ropes stack up to RSC's ropes, but RSC's ropes are better than the Mattel factory ropes, imo - so I'd probably go with those (unless WSS's ropes have a better spring to them). Anyways, a good informative video that's help me decide to purchase the ring later on.
TIPS: one Turnbuckle must act as the master turn buckle and hold the rope clamps behind each turnbuckle pillow at the same turnbuckle! about the mat problem! use dual sided tape on one side stretch it out "not to tight." and apply on each side until taught between the mat and ring itself. mine looks like it has been ironed,it is perfect! Trick: go to radio shack and get a true large condenser mic and small guitar amp and place the mic under the ring and wire it to your amp! the impact of take downs sounds amazing! and above all enjoy your figure federation and or collecting! :)
I'm a little concerned that the fabric turnbuckles are eventually going to tear from the strain of the ring ropes, I would hang onto the rubber turnbuckles form the Mattel ring in case the fabric ones break.
Well i just got my ring and it turns out that the elastics for the ring canvas are too small to twist. So if you Burnout, or if anyone has a solution to the loose canvas, please let me know, thanks.
Hey Chase what's better for my arena the Wicked Cool Toys ring or The Wrestling Super Store ring what's better in your opinion because I have both but I can't decide
do you think this ring is small enough to put inside the ASR? I have it and I hate how big and giant it is. If I buy this one, will it be much of a size difference?
Okay thanks a lot, I think I'm going to buy this one, the only thing is the canvas is too loose. But what I think I will do is twist the elastic part and then tuck it under so that it's a tighter pull
Glad you enjoy this ring! I do say though that the Wicked Cool Toys ring is better than the ESR. It's got the elastic bands that this Jakks clone ring has on the canvas but the canvas and skirts are all separate. Part of me wishes I didn't part with this ring mostly because i don't have as much outside ring space as i'd want, however the deciding point for me parting ways with this was not having a steel cage for it and the WCT ring has 2 coming out in the fall. But glad you enjoy this. If you want, you can always get a canvas (separate from skirt) from my buddy Naparo that has the ringskirts website. He even can add your logo onto the custom canvas and also, you can probably trim down your BPW skirt then just rethread it but if that isn't something you want to do, getting another skirt from him is always a plan B.
Nice thing about these rings are the availability of spare parts. Being able to change out the center post holders, legs, posts, etc is very nice.
Nice, I thought you'd like this. It looks like they changed a few things from the Jakks one. I don't remember having to take the legs off to get the elastic around the apron like that, although I've had the different aprons from the Classic Deluxe figures set up overtop of the blue WM2 apron on mine for a long time. The mat on mine has always been loose like how yours is. Although, I know several people have found a way to mod it. I've even seen where people just stretch gray fabric over it and sew it underneath to stay form-fitting, then put the CSDA aprons on and you don't notice it at all.
Glad this ring is better for you though, cool that the Mattel pads work on it too, always nice to have some cross-use out of things!
I'm definitely going to try that mod, Cap. Any links to it lol?
@@BurnoutInc is the official scale ring nice
It took me FOREVER to figure out how to hook the Turnbuckles and Ropes together (on the Jakks Version) and your video helped tremendously,thanks very much!
I’m glad I could help
@@BurnoutInc Actually I spoke too soon and am still having trouble. I have Cerebral Palsy which affects my Hand/Eye Coordination and Muscle Memory so it's tough to attach the Turnbuckle Hooks together while keeping the rope in the middle of the pad (even when I slow the Video down). If you could be of further help I'd really appreciate it
Had that version a while ago... sadly mine came broken lol
wodfigs that sucks, sorry to hear that
You deserve a new one.
Eljunior Cen lol 5 years later
THE NOTORIOUS HEEL lol yep.
I have one of these rings on the way. I hope it is in good shape because I recently received a toy van from this same company and it not only came with a broken piece but also with no instructions on how to put it together.
I’ve found that if you cut the foam out of the bottom of the canvas around the edges, the figures stand up better.
Just got it for Christmas. This video helped A LOT! Thanks man
I’m glad. It’s an awesome ring. If you ever get the chance, the old Jakks real scale accessories like the Hell in a Cell, Blue Wrestlemania cage and the elimination chamber fit this ring.
I miss having this kind of WWE ring. I had the one with the hell in the cell.
Great video Got my ring coming in the mail can’t wait
I usually put a 1/4" of foam under the canvas, so it stretches it out nicely and it's padded protection for your figures. Plus, I'd probably spray paint those posts and hand pant the corner slots the posts go into. Not sure how well the WSS ropes stack up to RSC's ropes, but RSC's ropes are better than the Mattel factory ropes, imo - so I'd probably go with those (unless WSS's ropes have a better spring to them).
Anyways, a good informative video that's help me decide to purchase the ring later on.
+NathanArnoldCharging glad you like it. That trick with the foam board sounds like a cool idea.
+BurnoutInc would you ever get the roh one ? Or the Kevin steen figure and do a comparison with the wwe elite version ?
@@BurnoutInc where can I get the 1/4 Foam
TIPS: one Turnbuckle must act as the master turn buckle and hold the rope clamps behind each turnbuckle pillow at the same turnbuckle! about the mat problem! use dual sided tape on one side stretch it out "not to tight." and apply on each side until taught between the mat and ring itself. mine looks like it has been ironed,it is perfect! Trick: go to radio shack and get a true large condenser mic and small guitar amp and place the mic under the ring and wire it to your amp! the impact of take downs sounds amazing! and above all enjoy your figure federation and or collecting! :)
Just ordered this ring, can't wait to get it after watching this!
Me to
I ordered mines today!! How’s the experience?
I order one as well! Mines coming this Thursday So excited! 😁
I know before watching the video i know it was going to be AWESOME
Congrats on finding the replacement ring, and the Hall of Fame Eddie figure.
Thanks bro :)
Any tricks for trying to get the ropes a little tighter? I've had this right for a year and can't figure it out.
The mattel turnbuckles look better
nice ring, I plan on getting this at some point. also wrestling superstore sells replacement parts for the ring.
First
Let me hop out the mawfuckin' Porsche.
You convinced me to buy this. I will also buy some ring skirts as well. Also i subbed
jystardustfan71 awesome, man. I hope you enjoy it. it's a great ring.
Will Chase arcade have miacheals vBryan
This is my kinda channel, new sub
I'm a little concerned that the fabric turnbuckles are eventually going to tear from the strain of the ring ropes, I would hang onto the rubber turnbuckles form the Mattel ring in case the fabric ones break.
Da'Shaun Stazzola
Thanks mate, They look like they could tear after awhile though.
I don't have a lot of money so I just order set of 12 black clothes so i will try to put it in the mattel scale ring
You should buy the high wire x playset from the same website it is a fun playset although it does have some flaws but still enjoyable
if you could own one ring, which one would it be ? aka whats the best ring out there ( Real scale ).
Well i just got my ring and it turns out that the elastics for the ring canvas are too small to twist. So if you Burnout, or if anyone has a solution to the loose canvas, please let me know, thanks.
Hey Chase what's better for my arena the Wicked Cool Toys ring or The Wrestling Super Store ring what's better in your opinion because I have both but I can't decide
When is meltdown
I use to have it but it broke so I got the wwe one and there both good cuz I could say I tested them both
Wait I can put this turnbuckle clips to my wwe scale ring? I lost a few of them 😞
BurnoutInc Chase, how much are those rings? Are they cheaper or more expensive from the Ringside Collectables rings?
about $70 after shipping
Do you think i can fit mattel ring skirt on these figure toy company ring ?
Maybe with some modifications. Those ring skirts are a little bigger than this ring can take.
I'm officially getting this ring!
Good. You’ll be happy with it.
@@BurnoutInc I'm planning an epic royal rumbe soon
@@BurnoutInc Where can I find one at a decent price?
Watch out i had the same one and it broke where the post is.
I know I'll be careful with it, can't say the same for Bison
This is nice,i think i may pick this up! i cant wait for melt down :D
+Burnoutinc r u gonna give your thoughts on the wwe figures that were shown off at San Diego comic con 2015 from yesterday?
NightCrawler 006 I have one on the channel right now :)
Ok cool
basically the turn buckles weren’t made by Mattel, it was made by Wicked Cool Toys
The only problem, is that the ring kind of small for a cage.
When's meltdown
Hey chase I saw Eddie and was like I gotta review mine lol but cool ring
+MR.WWE360 00 wtf
Thank you for the review
Is it better than wicked cool toys
I like the cloth pads more than the rubber ones. Like if you agree
do you think this ring is small enough to put inside the ASR? I have it and I hate how big and giant it is. If I buy this one, will it be much of a size difference?
+Sonny Munoz Its definitely smaller. I prefer it over the ASR and ESR.
Okay thanks a lot, I think I'm going to buy this one, the only thing is the canvas is too loose. But what I think I will do is twist the elastic part and then tuck it under so that it's a tighter pull
Sonny Munoz that's not a bad idea. I like the look without the mat. I need to fix my custom ring skirts to the sides but for now, it looks ok.
How hard are the turnbuckle pads are they difficult or easy to put on
how much was shipping?
Hi I just got this for my birthday and it's coming tomorrow my bro got me this so I'm just here to see
Burnoutic what is name of this ring scale?? So I can find in WresltingSuperStore and EBay and Amazon
José Argueta they call it a Wrestling Ring for Action Figures on the store, that's what I would search
Thank you My Dear Friend ✌🏼👍🏼👍🏼👍🏼
Isn't the Mattel ring the same ring as the Wicked cool toys one?
It is.
Is this ring smaller than the Mattel/WCT ring? I know you made a comparison but I wish I could've seen the two ring set up side by side
Burnoutinc I'm trying to start wwe stop motion so I need a ring I was wondering if i can have the old ring.
I don't have it anymore
ewe owner go buy one, he's not gonna give you a ring for free
I might get this and the highwire war next month I hope it's worth it
Highwire isn’t worth it tbh it’s crooked and will fall easily but the ring is 9/10 in my opinion
With actual play, they need to be tighter. I do not like them being so loose.
I wish I got this one not the one with wwe logos
Glad you enjoy this ring! I do say though that the Wicked Cool Toys ring is better than the ESR. It's got the elastic bands that this Jakks clone ring has on the canvas but the canvas and skirts are all separate. Part of me wishes I didn't part with this ring mostly because i don't have as much outside ring space as i'd want, however the deciding point for me parting ways with this was not having a steel cage for it and the WCT ring has 2 coming out in the fall. But glad you enjoy this. If you want, you can always get a canvas (separate from skirt) from my buddy Naparo that has the ringskirts website. He even can add your logo onto the custom canvas and also, you can probably trim down your BPW skirt then just rethread it but if that isn't something you want to do, getting another skirt from him is always a plan B.
Eric Williamson I'll look into his website, thanks for the recommendation
Not a problem man. Long friend of his and I always recommend him as he's still got the best work out there to date on all he does!
I just got ir and ir Work so Well
Dude please post more often
hey me and you have the same ring
In Maine it was 103 I sweated from moving my finger . It is hot loved the vid
That’s so dope I’m late in the game
there rings a bit meh idk if they have chanegd them up but comapred to other people customs this one kinda poo
i would buy this bu i cant fit a small child size ring in my house :v
I still think it's a pretty good ring.
It is. It's great.
@@BurnoutInc you think I should get it?
First to like also
Give me a break, I was dying lol 😂
Congratz on the new ring! Come on...Tell us the truth....Yokozuna broke your other ring.
How much money was that?
$50-$70 I think. It wasn’t bad.
@@BurnoutInc oh
@@The_Panda9 ohhhhhh
I have that one!
Keep that cat away lol!
I've set up turrets
First
where i can buy the jakks real scale ring?
Ebay is your best bet. WrestlingSuperstore's ring is the same size.
BurnoutInc no i can't buy in ebay because i'm from philippines so what is the easiest way to buy it?
I'm finally the first person to comment (I know no one cares)
Your second
Hoo-dini
Be careful this ring breaks easy that's why I have the authentic scale ring now lol.
What part broke on yours?
The ring posts bent inwards pretty bad. So I saw the authentic scale ring and got that instead.
Ok can i have a world title because I just have a ufc belt from jakks Pacific and Idk how to customize it
First comment
These fools sent me 10 hooks instead of 12 damn it
Anybody know how to custom make 2 extra hooks
you look like cm punk
I bought this years ago and it never came, still kinda annoyed about it. Don't really trust the site no more lol