How to Paint Tall Walls without ladder Wooster Lock Jaw Review
Вставка
- Опубліковано 11 вер 2024
- How to Paint Tall Walls without ladder Wooster Lock Jaw Review
Buy it HERE! amazon link: amzn.to/2O878eg
Support channel with PAYPAL donation: youtubeInfluencer@outlook.com
BUY COMAN KX3636 Tripod HERE! Amazon Link: amzn.to/3dIAv64
BUY Panasonic HC-X1500 4K Camcorder HERE! Amazon Link: amzn.to/3QCUy4f
BUY HC-V180K Full HD Camcorder HERE! Amazon Link: amzn.to/3ewA7nP
GoPro HERO10 Black HERE! Amazon Item link: amzn.to/3Cedq55
Buy Panasonic 4K Camcorder HC-WXF991K HERE! Amazon Link: amzn.to/3PuXL4n
CyberLink PowerDirector 20 HERE! Amazon Link: amzn.to/3dELRrq
BUY Sony FDRAX53/B 4K Camcorder HERE! Amazon Link: amzn.to/3AukDNh
Buy Viltrox Lighting HERE! Amazon Link: amzn.to/2MW1FpH
Buy Sony Cyber‑Shot RX10 IV HERE! Amazon Link: amzn.to/3QEsJZy
Buy Sennheiser MKE 400 Shotgun Microphone HERE! Amazon Link: amzn.to/3c3jrqE
Store Link: www.amazon.com... NEW LINK BELOW FOR 2022
Support channel with PAYPAL donation: youtubeInfluencer@outlook.com
BUY COMAN KX3636 Tripod HERE! Amazon Link: amzn.to/3dIAv64
BUY Panasonic HC-X1500 4K Camcorder HERE! Amazon Link: amzn.to/3QCUy4f
BUY HC-V180K Full HD Camcorder HERE! Amazon Link: amzn.to/3ewA7nP
GoPro HERO10 Black HERE! Amazon Item link: amzn.to/3Cedq55
Buy Panasonic 4K Camcorder HC-WXF991K HERE! Amazon Link: amzn.to/3PuXL4n
CyberLink PowerDirector 20 HERE! Amazon Link: amzn.to/3dELRrq
BUY Sony FDRAX53/B 4K Camcorder HERE! Amazon Link: amzn.to/3AukDNh
Buy Viltrox Lighting HERE! Amazon Link: amzn.to/2MW1FpH
Buy Sony Cyber‑Shot RX10 IV HERE! Amazon Link: amzn.to/3QEsJZy
Buy Sennheiser MKE 400 Shotgun Microphone HERE! Amazon Link: amzn.to/3c3jrqE
Store Link: www.amazon.com...
I am a decorator and would always use a ladder in a stairwell except when the ceiling and walls were the same colour. I appreciate not everyone would be comfortable using a ladder in a high stairwell. The paint pad on an extension pole will work reasonably well - they leave a narrow margin where the wheels touch the wall, but that would be acceptable for many people. Don't let paint get on the wheels! However a brush on an extension pole is only good for touch ups and it is almost impossible to get a straight line with. There are much better tool holders for extension poles than the Wooster, which has too much flex for my liking. Use the paint pad option if you are not going to use a ladder is my advice.
You ever use a gooseneck brush? I was thinking about grabbing one.
@@holdemdang only brush i use now. I own a painting business and the gooseneck was a game changer. We still use stilts but that brush is amazing for this kind of thing
Just took on a job today with same circumstances. I almost passed but I need the work. I was planning on using 12 inch plank from stairs to ladder on ground, then put another ladder on plank to ceiling. I have a similar tool to hold brush but didn’t like it when cutting in above 20 ft. It’s about holding a pole steady then. My plank plan is too risky though. I’m just packing my van with every option. Thanks for the advice!!
That was a very good demonstration thanks so very detailed 👍
Duct tape a brush on a pole works fantastic
Thats what i thought!!
Lol prefer a paint stick and angle brush taped with electrical tape to a telescoping extension, done deal.
I agree although the lock jaw is a great tool to paint in difficult hard to reach areas, it’s also very difficult to use and try and position, thankfully I only had a small area to do and that was enough
To control the Wooster clip it takes alot of upper body strength to keep it steady. Or take breaks in between passes
I can remember my old dad’s solution. Luckily the window on the outer wall on the stairs had a ledge that was roughly the same height as a horizontal section of stair rail on the opposite side so he just placed an old wooden door across the stairs, one end balanced on the i Dow ledge and the other on the stair rail. It created a handy platform that he would climb on. It used to scare me to death as a kid.
If you can't do a straight line on the side of a door frame..can't imagine those lines using an extension 😂😂✌
I had terrible results with that adapter. My stairwell is 18 ft. to the ceiling and impossible to get a ladder in the space. I went to HD and bought a quality paint pole (you need one that's stiff and not flexible).
In fact, I went exactly the opposite way you did and used a pad and was done in short order. Once I cut-in the ceiling I used a roller to finish up the lower walls.
I liked the pad so much I bought a couple extra on EBAY (Mr. Long Arm 0470 Trim Smart Paint Edger (2-Pack) New).
I threw that Wooster adapter in the trash. It was virtually uncontrollable at that height. With the pad I could just slide it up into place and glide along.
I'm not sure what you're talking about involving 'splatter' from a paint pad. They don't splatter unless you're doing something wrong.
did you use the pad with the pivot attached to an adapter? i am having problems with that wooster tool too, it is useless. i have a similar award ceiling situation over stairs so would need scaffolding which i cant do. i tried using a sash brush taped to edge of a pole with duct tape. that didnt work too well.
Lil M- No, don't use the pad with the articulating pivot. It's too hard to control. Order a couple of the pads I recommend on Ebay. They're stiff enough to hug the ceiling and spread the paint predictably.
Thanks for posting. This is safer than rigging a ladder in the stairwell
Your video is awesome!!! It’s funny as hell too!!
OK, I had four stairwells to paint and on the top floor where you get that big expanse of wall I was left with about 3 metres of cut in's to do that were awkward to get to, normally I use a product called a stairmate which allows a ladder to go up were I need to go but somewhere in the van a part of it has gone missing, not the sort of thing you can buy in your local store so I was up against it. In desperation I bought one of these brush holders and I have to say it worked really well, I was amazed. But I was only reaching across from the landing about 1.2 metres away and the cut in was just over head height. (Imagine painting in an average room and doing your cut in standing about 1.2 metres back from the wall) I can't see how you would get a good line if you were using it on a high ceiling where you cannot see the top of the brush, where I used it I could see the top of the brush and I achieved a good line, as good as the rest of the job.
So never say never, this £7.00 item got me out of a spot and sits in the van.
Ive got a stair master were u out it on the leg of your ladders and u can ajust it total piece of piss cutting in any staircase
I've never seen this product before. Thanks for sharing!
Thanks for the demonstration, I have been looking at all kinds of tools for faster cutting in. But I keep coming back to the same conclusion. All these tools seem very clunky to use and I feel would make the job take longer. The only other route I have found that looks like it would go faster, is getting a set of stilts. I work at an apartment complex and we have 9 and 12 foot ceilings. So a lot of my time is spent running up and down a ladder doing 3 foot of the ceiling at a time before needing to move the ladder. I am also considering using the roller covers for the FasTrim roller. The roller looks too gimmicky for me, but they might be on to something with the covers. I am looking for something with the speed of a roller, but has something built onto it for protecting the edge, that way I don't have to hold a taping knife as a blocker.
The Shurline edger sucks! The best one I have had good results with is the one by Mr. Long Arm. Wheels are bigger and roll good. Pad has foam behind flock and holds a lot of paint. You can create a wheel guard with a a piece of folded acetate that can be slipped in while loading to keep wheels clean. I did a stairwell with it and it came out just as good and in fact better than a brush with NO ladder. Remember to back wipe with it after your cut as it holds a lot of paint and can run. I used a brush holder just to get into top corners.
why wouldn't you use a pivot and ladder? I can't see getting a good cut with that
Thank you so much just bought a Wooster . Brilliant thanks
Great to hear!
On a staircase just paint the cealing the same color as the wall it looks nice
Thank you sir for this video! Very helpful!!!
Me and my dad are contractors and whenever we're painting we put scaffolding up like that we put ladders up like that
I want to see it used with paint and then a close up of edge. I cant see this working at all.
I totally agree, it looks to be not an easy thing to use, and how does the edge look, this kind of job probably takes a professional painter. I have a high stairwell & I don't think I'll. try to do it, too dangerous unless I can find a good way to paint it safely that also looks good!
Painter with 40 years experience here. Having tried many gadgets and gizmos over the years I have to say at least in this case - GET A LADDER A D A PIVOT AND DO IT RIGHT
@@davidhardy2583 What size of latter reaches that high? A scary ladder as he says.
did you use the tool or the edger to ultimately get it done?
Good little gadget for painting high ceilings by staircases to cut in when your not painting the ceiling and you dont want to buy expensive long ladders for a small area. With two different colours the cutting in will show if it's not very neat so it would take practice I guess. Cheers
Very true!
Thanks for sharing, I need one for my next project....
You should!
Does it come with a telescope for good optics up close. you cannot paint a 'cut-in' straight line if you cannot see where to paint. Limited use.😁
telescope not included
May be a drone might help😂
That tool is great in a pinch to maybe touch up a spot without having to use a ladder - and even then you've got to be super careful. I would NEVER EVER EVER cut in with it. And to solve your fear of dying in your stairwell, buy a PiViT Ladder tool.
Long John Roller using a twelve to sixteen foot long extension pole will suffice with some manual dexterity
thanks
Pad works best for me 👍🏻
I've used the pads they're garbage. Not enough nap to get enough paint on texture without overloading the pad with paint. The rollers eventually get paint on them and they get paint on the other edge. Best option is scaffolding or hiring a painter. If not you'll have amateur looking results. Even if you think they're OK, the first real-estate agent you hire will definitely recommend repainting.
not really.. these days most people buy and either tear down and rebuild, or they paint it before moving in... no agent will tell you to repaint. if you want a house in California and complain about a ceiling line paint job, someone else will over bid you and take it... no one even looks up at a ceiling paint job. In every place I looked at when I bought a few times I NEVER walked around looking at paint trim at the ceiling EVER...
@@LEARNINGCHORDS give it a few months. So many people are going to be losing their homes it won't even be funny.
very true-- sad times
But what if you want to paint your ceiling white and the walls a different colour. How’re you going to tape the ceiling 😖
It's an idea tool but it takes to long, I have used it.
What's wrong with a ladder exactly??
The whole risk of killing yourself that he mentioned a few times, depending on staircase I guess.
LMAO as a professional painter I can assure you the quality of cuttings with that extension are going to be absolutely horrific, much better to just get a ladder set up and get up to eye level so you can cut it in accurately
while you are correct-- most people do not want to set up a ladder over a spiral stairway where there is no place for safety. They want to save money and get it done. I can assure you that NO ONE I know walks into a room and looks up at the ceiling and top of the wall. They eye doesn't do that- so while it won't look great-- it will be fine
In a pinch I have used this device. Any experience painter can make it work. It’s all in the angle of the dangle.
..so basically there is no other option but to use ladders and scaffolds .....but thx anyway ...I still subscribed 👍
Just sell the house and move....ha
I just saw a video on a mini roller that can cut in
you made the square pad harder than it needed to be and being killed is an overexaggeration!
not true-- I died
just paint it all white - roller the lot !!
why tf is Tim Dillon teaching me how to paint this wall.
Looks to me that you're just showing how much easier using the paint pan would be🤷♀️
thanks ruthie
I hate ladders but I still do it
Put that painting on a canvas and make millions.
thanks
@@LEARNINGCHORDS Thought you would have like that comment. Thank's over all for the video, it does help with the height painting problems.
I am renting but need to paint so I can get my deposit back without buying all kinds of crap lol
be safe
There's got to be a better way
@@LEARNINGCHORDS I have two vaulted ceilings I have a 4 inch strip I need painted all the each of them they I want $888 to pipe a total of 28 ft x 4in I don't have that kind of money and even if I did I wouldn't pay that kind of price
@@LEARNINGCHORDS I have the ladders and the equipment I just don't have the ability anymore I'm too old and unstable well I get up on the ladder. I've been looking around I have a handyman that helps me periodically I'm hoping he'll call me back he's very reasonable on his prices
@@LEARNINGCHORDS I'm right there with you I'm way too old to be falling. Shoot. I fall down the stairs at least once a month if I need to or not. And all I can say is thank God for carpet with thick padding.
The stupid tool is not working right don't waste your money
What a load of crap sales gimmick
😂😂
The Ole Brush on a stick. Lost for words, hire a professional we know how to get up there.
Oh Put you pride aside Young man
theres no way in hell you can cut in properly with this you have to get up there there's no other way of going about it.
@@LEARNINGCHORDS true but rather take not the chance of getting called back.
Useless product. People cant even edge correctly with brush in hand, how you gonna expect them to edge with a brush on a pole adapter??
it works for me but it does suck
You ain't even painting
i was showing how to do it. rather hard to paint and get a camera on a tripod in that position and not block it with m7y body while recording and painting..