Very nice use of the DBC3 and the Benedini. A real showcase tank. Great Job. Once people experience the full sound of the Benedini and the engine mapping transitions, other system have a hard time measuring up.
Well, this is Heng Long tank which is I bought from local store. The modification of the gear box, wheel, tensioner, visaton speaker etc mostly from rctank.de; the sound module, amply, are from battle armor; the smoke unit is from thomas benedini store benedini.de. The FPV set up are from hobbyking.com; and all cameras are from ebay.com. The metal kanon and new turret are from rctank australia. The recoil gun made by my self also with rc controled vision block driver. All this cost 1-1,1k USD roughly
Another modification with this unit: I add mechanism so the smoke not just only out from exhaust pipe, but also out from cannon barrel after successfull canon firing. Find the video in my account. Cheers
Isaac: in this video I use IR battle turret. But I have another turret swapable with this thank. So whenever I want, I can change the model from IR to air soft. In other video, my upgraded air soft turret can explode an explosive BB bullet
hi Benny, could you show us your FPV'd tiger like you've done before=but this time with the Benedini sounds...If you can mate, talk us through the triple switchable views, then tank engine running and smoking...Hence a combined full immersion vision and sound experience. Thanks heaps in advance.-Rey
Lovely Tiger.. I have a Heng Long Tiger, and all metal Taigen and Torro Tigers. The Torro has the gun recoil and led flash, but not the Benedini sound system. This I want to upgrade! Is it easy to fit??
German Tiger with german oilsmoker in 12V, thats more then 4 to 6 times more smoke then the original Heng Long version. Ok that's more than enough :-) My E50 is jealous a bit...
1/16 scales are actually 90-120 dollars. 1/8, and 1/6 scale are around 500, and don't even get me started on the 1/1 scale. The smaller the number, the better.
SpontiFlex its very easy, I use DBC2HL to conect henglong board with benedini. You can ask dan crowley in battlearmorrc.weebly.com. I am sure they will help you with it
What are some of the upgrade parts one should get if starting in rc tanks? metal? steel or brass gearbox? metal wheels all around with metal tracks? motor upgrades as well? Seems like plastic wheels would get worn out fast.
Wynester71: if you dont want FPV then it is very easy set up with just only benedini sound, DBC, and amply. But since I use benedini smoke system also, a lil problem will occur regarding the piping. I manage to solve it using right angle pipe connector from wiper car system. This tank is swapable turret. Right now I use BB gun turret with green laser targeting and gun mech modification using precision barrel 6.02. The latest I want to implement is adding UV led inside BB magazine so the tracer BB pellet will available for night battle....yeaaahhhh
Blubb, that would be a long list But let me guide you step by step 1. Heng long rc tank 2. At least 6 ch rc plane remote control, prefer 8 ch (I use 14 ch at that video) with 6 plus receiver 3. DBC2HL control tank That is the basic. If you interest more, lets continue by email
Love the recoil system on this Tiger. Excellent sound mod as well. Great job.
What a great video! The smoke and recoil are really something. Love the roar also. Impressed is all I can say.
i am impressed with the smoke your tiger puts out and i really like the moving driver port.... well done
Very nice use of the DBC3 and the Benedini. A real showcase tank.
Great Job. Once people experience the full sound of the Benedini and the engine mapping transitions, other system have a hard time measuring up.
Best sounds hands down!
Well, this is Heng Long tank which is I bought from local store. The modification of the gear box, wheel, tensioner, visaton speaker etc mostly from rctank.de; the sound module, amply, are from battle armor; the smoke unit is from thomas benedini store benedini.de. The FPV set up are from hobbyking.com; and all cameras are from ebay.com. The metal kanon and new turret are from rctank australia. The recoil gun made by my self also with rc controled vision block driver. All this cost 1-1,1k USD roughly
very nice looking....the weathering looks great....i ordered one...cant wait for it to get here...
That my friend is awesome.
Very nice tank! Great work!
Richtig cool das Teil. 🇩🇪 Das hätte dem Opa auch gefallen😉
well this work with henglong tiger one i love the way yours sounds
Nice tank, nice feet
Another modification with this unit: I add mechanism so the smoke not just only out from exhaust pipe, but also out from cannon barrel after successfull canon firing. Find the video in my account. Cheers
anazyudhis no
anazyudhis ‘
Good Tiger and how to close window?
Use servo to close and open window. Adjust travel speed servo on the TX
Cool Tank, Great Video, Well done
WOW! Well done!
Thats great tank mate
Great work
Isaac: in this video I use IR battle turret. But I have another turret swapable with this thank. So whenever I want, I can change the model from IR to air soft. In other video, my upgraded air soft turret can explode an explosive BB bullet
hi Benny, could you show us your FPV'd tiger like you've done before=but this time with the Benedini sounds...If you can mate, talk us through the triple switchable views, then tank engine running and smoking...Hence a combined full immersion vision and sound experience. Thanks heaps in advance.-Rey
Lovely Tiger.. I have a Heng Long Tiger, and all metal Taigen and Torro Tigers.
The Torro has the gun recoil and led flash, but not the Benedini sound system. This I want to upgrade! Is it easy to fit??
Cute baby tiger 😂
Asesome🤙🏽
does it integrate with spotify?
Did the dog try and run off with the camera
FPV V3: it is simple, I use DBC to convert signal from futaba receiver to henglong board. Find it in many wen source
Realy nice =) where did you buy it ?
mate, I strongly encourage you to join RCU and post your awesome work there...=)
How much smoking oil did you put in?
Usually 3-5 cc will be burnt in one cycle play. But I always put about 10 cc inside the oil tank. The rest will be suck out with syringe after play
I own a heng long tiger, and the recoil of the gun is nothing like this one. I like this one.
is trucks made of steel or made of plastic
German Tiger with german oilsmoker in 12V, thats more then 4 to 6 times more smoke then the original Heng Long version. Ok that's more than enough :-) My E50 is jealous a bit...
where is fpv ?
What and how did ou improve it so much?
Damn how loud is it
100 dollar rc tank turns into 200 dollar rc tank
Err...actually it cost near 1000 dollar
1/16 scales are actually 90-120 dollars. 1/8, and 1/6 scale are around 500, and don't even get me started on the 1/1 scale. The smaller the number, the better.
donde venden?
Hello, how did u combine the benedini modul with the heng long tx18 board? I need Help! THANKS!
SpontiFlex its very easy, I use DBC2HL to conect henglong board with benedini. You can ask dan crowley in battlearmorrc.weebly.com. I am sure they will help you with it
What are some of the upgrade parts one should get if starting in rc tanks?
metal? steel or brass gearbox? metal wheels all around with metal tracks?
motor upgrades as well?
Seems like plastic wheels would get worn out fast.
Прикольно
where did u get that sound module i would love it for mine thanks..?
Hello wich model of heng long is that ? Thanks
is this airsoft or inferred system
Do some of these tanks actually fire a projectile ?
Yes, most Heng Long tanks fire bbs.
hi how u add futaba radio?
where do you put the bb's on this model
Richard Mckay no bb's
fucking nice
hey
would u list your components from ur tiger pls?
i will build the same but i dont know which components u use :/
thanks! :)
Wynester71: if you dont want FPV then it is very easy set up with just only benedini sound, DBC, and amply. But since I use benedini smoke system also, a lil problem will occur regarding the piping. I manage to solve it using right angle pipe connector from wiper car system. This tank is swapable turret. Right now I use BB gun turret with green laser targeting and gun mech modification using precision barrel 6.02. The latest I want to implement is adding UV led inside BB magazine so the tracer BB pellet will available for night battle....yeaaahhhh
FPV isch andärsch. ;-)
Di jual ga om tanknya?
Beli dimana mas?
Do all henglong tanks can shoot ??, nuve video like:)
No one can shoot, it s just a simulation
Fpv?
Ulf Holmström yes it is
🌺
Took 3 minutes to start a 1/16 when a 1/1 has already driven off.
Are you sure😂
TUKU NOK ENDII IKU CAK.... 🇮🇩🇮🇩🇮🇩🤝🏻🤝🏻🤝🏻🤝🏻❤❤👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻❤❤❤❤❤
え、めっちゃカッコええ笑
heng long tanks rule
Well the Motor Sound is really cool but I dont like the Sound when he turns the turret around
mancap
bro..kt mner bli ni...brp harga??
german tank requires german smoke oil xD
org indo??
Rifan Mulyadi: yoi brow
ada yang tau belinya dimana ?
Gabung saja di komunitas Indonesia RC Tank Community (IRTC) pangkalannya di museum Satria Mandala Jakarta. Atau cari aja FB IRTC
Blubb, that would be a long list
But let me guide you step by step
1. Heng long rc tank
2. At least 6 ch rc plane remote control, prefer 8 ch (I use 14 ch at that video) with 6 plus receiver
3. DBC2HL control tank
That is the basic. If you interest more, lets continue by email
hong pong
Beli dimana bro?