👇 If you found this video helpful, you can support us by buying products on a platform of your choice via our links below (we get commission): 👕 Make your clothes unique: rctoys-aventura-smart-solutions.myspreadshop.com/ ▶ Amazon: amzn.to/3PHZ3wm ▶ AliExpress: s.click.aliexpress.com/e/_DEFpkJD 📺 Related videos: How to Calibrate a Drone (E58) and how incorrect calibration affects the drone: ua-cam.com/video/h08LjvIpWs8/v-deo.html All E88 Drone videos here: ua-cam.com/play/PLA0BUXPCZx4M6sWGsm5y7S5uiSPOpSoj1.html
Not to be confused here: one thing is the calibration before take-off, and then, if it still drifts, you calibrate it in the air, which is another thing. And this drone does not have GPS system, so a bit of drifting is normal.
Thank you for the instructions. I am impressed with my e88, I just received it yesterday. The instructions I received with the drone are very difficult to understand and incomplete. Do you know if there is anywhere I can get complete explanations of all the controls of this remote? Thank you again.
My e88 got a bit different controller than the one on the video, tried calibrating it this way and also according to manual (it said to push both sticks down right at the same time), neither of these worked for me, just nothing happens, anyone got the same problem?
Thanks fir the video, I have the pro version drifts a but to the left but correction using the rigjt button, do you have it in speed setting 1 when testing and have you tried to perform roll stunts.
Rolling in the air works fine. When calibrating, the speed setting should not matter. I usually set the speed level to the highest to have better control of the drone.
There is no such thing like cancelling the gyro calibration. You can reset it. After turning the drone off, when you turn it on again, it may keep flying well, and if not, you need to reset it again or adjust it manually using the four buttons while in the air. But the general advice by the manufacturers is always perform factory calibration after turning the drone on (gyroscope reset or factory reset) and then, if necessary, fine tune it with manual calibration while in the air.
Great video Dude, but I have a question.. Do I have to calibrate every single time before each flight, or juat once? Does the drone save the calibration in its memory? Thx 🙏
Calibration reset looks like saves it in the memory even after you turn the drone off. Calibration that you perform during the flight looks like not. Mainly for cheap drones, it is always advised to do a calibration reset on a plain surface after you turn it on. On more advanced but cheap drones it may not even let you fly if you do not perform calibration.
@@RCToysAventuraSmartSolutions Thank you so Much Buddy ! I got this "cheap" drone for my gf and I got for myself the Potensic ATOM 4K, so we both will learn starting with the basic cheap one and then moving towards the more advanced one. The price was good so I really couldn't let it pass, being able to see this beautiful world from above, I think it's a dream finally come true for any Human being. 🙂🙏
Better calibrate it each time before flight, in some cases it may fly ok without calibrating after take off as well. This model has a camera at the bottom which helps to stabilize the drone.
not bad video. make more video like this and get yourself more confident in talking. secondly i guess its drifting a lot now cus i crushed to wall couple times. :D and i guess same to you as well. its plastic and easily bends even let say 0.0001mm bend means its not as it should be. my suggestion - Get a new one and repeat this process.
👇 If you found this video helpful, you can support us by buying products on a platform of your choice via our links below (we get commission):
👕 Make your clothes unique:
rctoys-aventura-smart-solutions.myspreadshop.com/
▶ Amazon:
amzn.to/3PHZ3wm
▶ AliExpress:
s.click.aliexpress.com/e/_DEFpkJD
📺 Related videos:
How to Calibrate a Drone (E58) and how incorrect calibration affects the drone: ua-cam.com/video/h08LjvIpWs8/v-deo.html
All E88 Drone videos here: ua-cam.com/play/PLA0BUXPCZx4M6sWGsm5y7S5uiSPOpSoj1.html
you are my hero! I was getting ready to give up. My drone would start up then immediately blink and after calibrating it works again.
Best explanation thanks a lot love from India ❤
Big thanks from Bulgaria.
Bro thanks. I was about to return my drone but when I watch your video, you helped me thank you so much.
Thank you, you just made my day, fr. Cape Town, SA✌
I did it on a plain surface but when I did the calibration and start flying it always drag to the right, did I do something wrong?
Press the left button a few time till it comes to the centre. Done.
Not to be confused here: one thing is the calibration before take-off, and then, if it still drifts, you calibrate it in the air, which is another thing. And this drone does not have GPS system, so a bit of drifting is normal.
Thank you for the instructions. I am impressed with my e88, I just received it yesterday. The instructions I received with the drone are very difficult to understand and incomplete. Do you know if there is anywhere I can get complete explanations of all the controls of this remote? Thank you again.
Look on UA-cam. We just got it and found instruction.
Thanks from philippines
My e88 got a bit different controller than the one on the video, tried calibrating it this way and also according to manual (it said to push both sticks down right at the same time), neither of these worked for me, just nothing happens, anyone got the same problem?
me too
me too. can't calibrate
Same
Aaaaaaa I getting my one tomorrow can wait 🎉
Hello, I have a question, my remote control for this drone is broken, I bought a new one but I cannot pair the drone with the remote control
the same question
Connect your phone and control it with the app.
This actually helped thanks 😅
Thanks fir the video, I have the pro version drifts a but to the left but correction using the rigjt button, do you have it in speed setting 1 when testing and have you tried to perform roll stunts.
Rolling in the air works fine. When calibrating, the speed setting should not matter. I usually set the speed level to the highest to have better control of the drone.
Why does my drone go full power no matter what? It just full sends it up into the sky and doesnt stop.
how to connect the wifi to use smartphone app and see where you fly asking for a friend that has one
Vaah yaar daiji yaar 🎉🎉
Im unable to do emergency landing
Hello friend, I have 3 questions, thanks in advance. What are the steps to do the factory reset? What are the steps to calibrate the gyroscope?
Bro you have 2 option either calibrate it with the remote controller or with the rc fov app😊
Help! My E99 Pro won't sync.
Is it a must to cancel the gyro calibration when i switch off the drone
There is no such thing like cancelling the gyro calibration. You can reset it. After turning the drone off, when you turn it on again, it may keep flying well, and if not, you need to reset it again or adjust it manually using the four buttons while in the air. But the general advice by the manufacturers is always perform factory calibration after turning the drone on (gyroscope reset or factory reset) and then, if necessary, fine tune it with manual calibration while in the air.
Mine doesn’t do anything for pulling down the 2 sticks, its not even holding its height while flyin just falls if I don’t push it upwards :/
Ah nvm just made it work, you gotta nail the angle. Will see if it works
thanks sir u helped alot !
Thank you
Worked for me ❤
Hello my e88 drone one of its propeller keep spinning even the drone still not on
Probably a soldering issue just open it and check the wires and soldering if you have any experience if not just take it to a shop
What app is the name for camere on the drone
RC FPV on Google play store
Please check the E88 playlist, there is a video on how to find the right app and the name is mentioned as well.
Just scan the bar code and install on your phone.
mine just keeps fliping over and turning leftand not flying at all
Great video Dude, but I have a question..
Do I have to calibrate every single time before each flight, or juat once?
Does the drone save the calibration in its memory?
Thx 🙏
Calibration reset looks like saves it in the memory even after you turn the drone off. Calibration that you perform during the flight looks like not. Mainly for cheap drones, it is always advised to do a calibration reset on a plain surface after you turn it on. On more advanced but cheap drones it may not even let you fly if you do not perform calibration.
@@RCToysAventuraSmartSolutions Thank you so Much Buddy ! I got this "cheap" drone for my gf and I got for myself the Potensic ATOM 4K, so we both will learn starting with the basic cheap one and then moving towards the more advanced one.
The price was good so I really couldn't let it pass, being able to see this beautiful world from above, I think it's a dream finally come true for any Human being. 🙂🙏
Can't save calibration after we tune it?
You just calibrate it each time you want to fly, it's easy to do.
Better calibrate it each time before flight, in some cases it may fly ok without calibrating after take off as well. This model has a camera at the bottom which helps to stabilize the drone.
Can you lift a weight of 100 grams and fly correctly?
NOPE. Max is about 8 grams while still being able to go up, after that it just hovers and you can't move upwards
My drone keeps flying backwards no matter what idk how to fix it
🫰🫰🫰like me... don't know how to calibrate that thing... thankz for this video .
tanks man❤❤❤
Mine won't calibrate
did you find the solution?
Mine doesn't do or respond to factory reset
same here. did you find the solution?
After calibration it still drifts.
Imma be pretty busy until I leave after Thursday. Unless it rains.
Sir is DM 97 is better or E88 ?
Any difference in this two?
Is stability is good?
Right value for money?
Same doubt,which is better?
Can u pls tell
Mere remote me light he nhi jal rahe hai
It doesn't give enough time to adjust
Use the app
..press the padlock and u can use your mobile to fly it...plan route and return with full FVP capability.
For a cheap drone its brilliant
My E88 drone after i factory reset it still drifts in one direction and can barely takeoff like not even get off the ground
Same problem
Me too. I had another one of these drones and it never had this problem.
Same problem.. is anyone found the solution
Did you remember to put your propellers on
@@RBKTWNhow do I put the propeller
not bad video. make more video like this and get yourself more confident in talking.
secondly i guess its drifting a lot now cus i crushed to wall couple times. :D and i guess same to you as well. its plastic and easily bends even let say 0.0001mm bend means its not as it should be.
my suggestion - Get a new one and repeat this process.
😢😢I lost mine forever...... I don't even know if it's still in the sky🤷♂️
How did u lost it? Went far?
I think I saw it flying overhead yesterday. If I see it again, I'll try and snag it for ya. 😅
👍
Thabk
😮e kosi
Ειδα βαλατε περιπου 77 ευρω βενζινη;αδειο τοχε; 😂😂 η καρδια μου με επιασε😂😂
Its not flying