Transferring your Design onto Lino

Поділитися
Вставка
  • Опубліковано 27 тра 2024
  • You have a drawing and you have a piece of lino... but what's the best way of transferring one to the other? Here are a few options for you.
    Materials available from handprinted.co.uk/
    Lino: handprinted.co.uk/collections...
    Tracing paper: handprinted.co.uk/collections...
    Red Carbon Paper: handprinted.co.uk/products/re...
    Blue Carbon Paper: handprinted.co.uk/products/ca...
    Permanent Lumocolor Pencils: handprinted.co.uk/products/st...
  • Навчання та стиль

КОМЕНТАРІ • 12

  • @RichardLaurence
    @RichardLaurence 2 роки тому +2

    Excellent demo - two products I didn’t know about!

  • @jennitanner4703
    @jennitanner4703 2 роки тому +1

    Thanks for demonstrating these products Holly. Can you do a video on the best methods to transfer a design onto the easy carve type blocks please - I'm struggling :D

    • @Handprinteduk
      @Handprinteduk  2 роки тому

      In the meantime, we have a blog post about using the carbon papers on different blocks: handprinted.co.uk/blogs/blog/which-carbon-paper-should-i-use?_pos=8&_sid=f32089fe1&_ss=r

  • @simonedoherty6195
    @simonedoherty6195 2 роки тому

    Thanks Holly, another informative video. I have personally found that Sharpie and graphite tend to transfer to the print unless I do some clean up before printing.

    • @Handprinteduk
      @Handprinteduk  2 роки тому +1

      Good tip! If I use sharpie I try to keep it in the areas that will be carved away. Cleaning up before printing is usually a good idea, I agree

  • @thicketwings05
    @thicketwings05 2 роки тому

    Hi Holly, thanks for this helpful video. Is there a type of pen you would suggest for drawing onto the lino?

    • @Handprinteduk
      @Handprinteduk  2 роки тому +1

      Permanent pens ideally but permanent pencils and carbon paper are better as they are less likely to transfer to the print

    • @thicketwings05
      @thicketwings05 2 роки тому

      @@Handprinteduk thank you. I used a faber-castell Pitt pen but it seems to be smudging. Sharpies are a safe bet?

    • @Handprinteduk
      @Handprinteduk  2 роки тому

      @@thicketwings05 Sharpies work pretty well but still might smudge a bit

    • @thicketwings05
      @thicketwings05 2 роки тому +1

      @@Handprinteduk Thank you! X

  • @orion7741
    @orion7741 2 роки тому +1

    this is helpful for beginners, although its only half of a video... you did not cover one of the most common methods of transfer out there, that is the ink jet and glue method, and also there is the laser jet and glue method as well. there is also the key block method of transfer. and a few other ones less common. It is a great idea for a video, but by leaving out so many other common methods of transfer you produced a kind of mediocre video that comes up really lacking by leaving out information.

    • @Handprinteduk
      @Handprinteduk  2 роки тому

      Hi Orion, you're right, there are other methods out there. This video is just about some of the easy methods available. There is also the offset printing method that we hope to cover on another video. Thanks for watching!