How to Check Ignition And Electrical Vega Zr, Jupiter Z1.

How to check the ignition and electricity of the vega zr, jupiter z1 by checking first cable 3 from the road spool and cable 2 from the pulser.
1. The white cable as charging goes directly into the kiprok pin of the upper right socket.
2. the yellow wire as the current for lighting or lamps goes to the bottom left kiprok socket pin.
3. black cable as a road spool, must be attached to the motor body.
4. the ping cable as a negative pulser goes directly to the cdi socket on the top left.
5. white wire as a positive pulser goes directly to the cdi socket on the bottom left.
For the cdi cable that has 3 in the cdi vega zr socket, the bottom black cable is cdi time, the lower right brown cable from the cdi socket must be connected after the ignition output, it's 12 volts. And the top right orange wire is the ignition current that goes to the coil.
For the kiprok there are 4 pin sockets:
1. The black cable above the left is kiprok time
2. The yellow cable on the bottom left for lighting
3. The white cable on the top right is for charging the battery
4. The red cable on the bottom right is the battery current that goes to the ignition and goes to the brown CDI which is on the bottom right.
Thank you to all #SUBSCRIBER# and viewers wherever you are, hopefully the knowledge is useful.
Please #SUBSCRIBE LIKE COMMENT AND SHARE#
#SIDIK NURYADEN CHANNEL#
If you have any questions, you can write them in the comments
Thank you very much.