this was extremely helpful. the tip of sticking tape on the side while dry fitting the alignment was the key to success. pretty much got mine on perfect after seeing this vid (after completely botching the first one without any instruction). thanks again!!!
Just applied one to my wifes Samsung Galaxy S5 and found it impossible to both position it right and avoid dust and bubbles. This method is pure genius! Thanks a LOT! :-)
Key is to get it done first time. Once you make a mistake and need to pull it off is when you'll get massive bubbles. I'd like to see a video of a badly applied protector, reapplied, without bubbles.
the ultimate key to fix a corrupt SP is patience and quality of product used, for ex. tech armour SP for mini iPad, I removed it easily and completely after a dirty installation due to being in hurry, I reinstalled it after removing the complete sp then flipping it on its back, cleaned it with a dust removal stickers, cleaned the screen then installed it again, I don't have to mention that the surface where you do the process has to be cleaned, the tools you use, your hands and never underestimate the power of a good near and direct light source focused on the phone
thanks much! I got 2 covers to play with, and after messing up completely with the first one, your instructions saved the day for me - I succeeded in putting the cover without a single bubble in my 2nd and last chance...
I usually go to the bathroom to apply screen protectors. Turn on the shower in hell mode, make a lot of moisture inside, it will pull any dust which is floating around down to the floor. Clean the screen with the cloth, take off the the 1st layer upside down to avoid any remainable dust to stick on the adhesive side and then just put in on. Any remaining bubbles (if there was any) will came out with a bank card. Voilá! Enjoy your bubble free screen. It worked for me everytime.
This is the best tutorial ever. I personally didn't have the kit, but just following the instruction and making sure the screen was free from dust a third grader could do it. I made sure my screen was clean. Then I placed the screen protector in place and taped it down on one side. Double check the phone screen for dust and then peeled side 1 and placed it down on scree. Checked it for bubbles using a credit card or a rewards card something like that and then peeled side 2 checked it for bubbles. That it BAM!! Good luck
Wow , great job. I wish you can do it for me. I bought last week and i haven't use it because I'm scared to mess up with screen protector. Thanks for the video.
I heard Tempreded Glass protectors are very easy to install since it is not a film and its very easy to get out air bubbles in the rare case you get air bubbles.
duMaurier15 I had one three days ago, but I did't know how to put on correctly, but yes, glass protector fit on easy in a second, but I see now next time do better cleaning before put on (had one bubbles in the middle)
I bought a zGear screen protector with a frame. Could not figure it out. Ended up taking it back. Currently have an old, film screen protector that is held in place along the sides with duct tape. I found some white duct tape which really gives it a classy look. I'm probably going to go with this set-up from now on.
Wow. One of the best videos out there if not thee best I've seen so far. And the 2 little pieces at the end there in case there's a piece of dust, very nice. I don't have this same kit but those 3 stickies shouldn't be that hard to make with regular scotch tape. I'm definitely putting this video aside when it's time to change my Vita screen protector. 👍
I was waiting for those stupid dust bits to show up and see how you get rid of them. Thanks for that part. I went through 2 films and just gave up trying to get it perfect. Will do it over now.
Well thought-out and very helpful. Wish I'd known about your method before having bought other brands' versions of this product. You folks are now on the very short list for similar future needs.
This is a wonderful tutorial! I installed a perfect cover on my cellphone!! I used the clear tape to set the cover sheet at the beginning, and also use it to lift the cover to remove bubbles caused by tiny dust around the edge.
I bought six of these for my new HTC One M8. I followed the instructions to the "T". It worked perfectly, no bubbles and no dust. Absolutely perfect....except for one minor complaint. For my HTC One M8, the screen protector is about 2mm too short, so there is a 1mm gap at the top and bottom. Same goes for the sides. Because I am using an awesome case, you don't see the gaps on the sides as they are covered, but the one at the top and bottom really bugs me. I realize they may have done this on purpose to make aligning the protector a little easier, but I really prefer protectors that fit perfectly. Because of this, I can only give this protector a 4/5. The application method is excellent, but the fit isn't all that great.
They make it look so easy, but then when I go to do my screen protector I balls it all up. But I purchased the iPhone 8 Plus 256gb silver applied the glass screen protector and did a really good job no bubbles or any dust I was so pleased with myself 😊😊
My god Im so happy i got this screen protector. I completely screwed my first one up, It came with spray, and was terrible. The things this comes with is genius and really help you get it on bubble free. Im so ocd with my screen protectors. this is the first one that I truly like.
WARNING! What I`m about to write will totally help you. I have totaly followed your instructions, but I had terrible bubbles. I was prepared to trow away the foil but I had an ideea, what if, I just wash the foil with soap and just give it another try. It totally worked!!! I didn`t even dried the foil, I let the small drops of water on the foil, and now I have no bubbles and the foil sticks very well. Please make a video showing this cost saving method! Thanks!
Just installed a citigeeks screen protector on a samsung Galaxy S4 Mini following this video and it went flawlessly! Thanks so much for making this video and saving me some frustration. I usually end up ripping the screen protectors off my devices because bubbles drive me insane! wont be with this one. :)
I already happened to order a tempered glass protector, but I'll be using this method to install it. I don't believe it comes with the two stickers they show toward the end, but I think I can manage to rig some tape if needed.
Very good job man... i always use screen cleaning spray and rub it ojt with a card... but when i buy protectors i dont get that huge adhesive sticker.. thats handy
I have a Nokia Lumia 930, where can I purchase a screen protector like this? This is amazing, I can never apply a screen protector without the massively big bubbles that really irritates me.
I highly recommend you have some practice at this before doing it this way. He made it look very easy and I had a much more difficult time than he did.
It is always a better idea to work the cloth from the center, outward... starting in the center and working toward the edges. This is particularly important in the presence of persistent bubbles.
Use the vacuum cleaner, place the nozzle stationary next to the phone screen before placing the protective screen, that would suck all the dust that is invisible and flying through the air.
No matter how hard I try I always seem to get a speck of dust or hair under the protector, that's why now I run the shower so all the steam means there's no dust in the air and now works perfect every time
Why is my screen guard making a layers of colors when screen is white moreover what to do of these two rectangles ( part of screen guard) on the tops a few bottom
I usually dip my screen protector in rubbing alcohol then apply it to the screen. Just did it for my PS Vita, and when i push the bubbles out its just air pockets.
You made that look so easy. When I do it there are more bubbles than a bar of aero
I love how there seems to be an art to doing this.
this was extremely helpful. the tip of sticking tape on the side while dry fitting the alignment was the key to success. pretty much got mine on perfect after seeing this vid (after completely botching the first one without any instruction). thanks again!!!
That was oddly satisfying
A bad I bought new one it was wast durty tracks if we go to shop they will put for 20 rupess
Hi
Just applied one to my wifes Samsung Galaxy S5 and found it impossible to both position it right and avoid dust and bubbles. This method is pure genius! Thanks a LOT! :-)
It worked flawlessly and effortlessly for me. No bubbles or marks. All thanks to this video. Thanks so much! :)
Daniel McFadden
ช
Daniel McFaddฃฃฃงชงฃฃงฃชช
Daniel McFadden ง
lucky bich )
shut the fuck up about how perfect your life is
Key is to get it done first time. Once you make a mistake and need to pull it off is when you'll get massive bubbles.
I'd like to see a video of a badly applied protector, reapplied, without bubbles.
Fright Foo Here is one - ua-cam.com/video/Nus18lH4SkU/v-deo.html
CitiGeeks thanks :)
+David Topchiev Thanks for asking. It's made by +CitiGeeks in Canada with domestic and imported content
the ultimate key to fix a corrupt SP is patience and quality of product used, for ex. tech armour SP for mini iPad, I removed it easily and completely after a dirty installation due to being in hurry, I reinstalled it after removing the complete sp then flipping it on its back, cleaned it with a dust removal stickers, cleaned the screen then installed it again, I don't have to mention that the surface where you do the process has to be cleaned, the tools you use, your hands and never underestimate the power of a good near and direct light source focused on the phone
clansman81eg ,zzaqaaa
thanks much! I got 2 covers to play with, and after messing up completely with the first one, your instructions saved the day for me - I succeeded in putting the cover without a single bubble in my 2nd and last chance...
I usually go to the bathroom to apply screen protectors. Turn on the shower in hell mode, make a lot of moisture inside, it will pull any dust which is floating around down to the floor. Clean the screen with the cloth, take off the the 1st layer upside down to avoid any remainable dust to stick on the adhesive side and then just put in on. Any remaining bubbles (if there was any) will came out with a bank card.
Voilá! Enjoy your bubble free screen. It worked for me everytime.
it would work with a waterproof/splashproof phone tho
This is the best tutorial ever. I personally didn't have the kit, but just following the instruction and making sure the screen was free from dust a third grader could do it. I made sure my screen was clean. Then I placed the screen protector in place and taped it down on one side. Double check the phone screen for dust and then peeled side 1 and placed it down on scree. Checked it for bubbles using a credit card or a rewards card something like that and then peeled side 2 checked it for bubbles. That it BAM!! Good luck
I'm sharing this on FB! Great Job!
Wow , great job. I wish you can do it for me. I bought last week and i haven't use it because I'm scared to mess up with screen protector. Thanks for the video.
This is the best video on doing this on the planet! Good job!
Does this work for Tempered glass protectors? This is by far the best method to install a screen protector I've seen on UA-cam!
I heard Tempreded Glass protectors are very easy to install since it is not a film and its very easy to get out air bubbles in the rare case you get air bubbles.
duMaurier15 I had one three days ago, but I did't know how to put on correctly, but yes, glass protector fit on easy in a second, but I see now next time do better cleaning before put on (had one bubbles in the middle)
Hemel Hemstead duMaurier15 My concern is the presence of visible dust particles since I am a bit OCD.
Damn it for almost 3 years this video has been available and I didn't know it.. argh. Great job
Now 6!
The best video I found to teach someone.
Burbujas de aire ..
this might be the best method to apply a screen protector i have ever seen!
I bought a zGear screen protector with a frame. Could not figure it out. Ended up taking it back. Currently have an old, film screen protector that is held in place along the sides with duct tape. I found some white duct tape which really gives it a classy look. I'm probably going to go with this set-up from now on.
This is the only tutorial that I like cause most of them they speak half way through it and it's really complicated
Wow. One of the best videos out there if not thee best I've seen so far.
And the 2 little pieces at the end there in case there's a piece of dust, very nice. I don't have this same kit but those 3 stickies shouldn't be that hard to make with regular scotch tape.
I'm definitely putting this video aside when it's time to change my Vita screen protector.
👍
for how much money can i get this guy to come to my house and apply mine😂
$150.
Clint Murray $1.50*
More then 200 becus the flighing and taxi
i tried this and it worked amazing!!! i messed up so many protectors before watching this vid. thanks for the vid
A good trick is to do it in the dark...then the bubbles don't matter.
this comment deserves more likes
I tried this today and it worked like a charm! Thanks for the video!
I was waiting for those stupid dust bits to show up and see how you get rid of them. Thanks for that part. I went through 2 films and just gave up trying to get it perfect. Will do it over now.
Well thought-out and very helpful. Wish I'd known about your method before having bought other brands' versions of this product. You folks are now on the very short list for similar future needs.
Very concise and straight-forward. Thank you for posting.
This is a wonderful tutorial! I installed a perfect cover on my cellphone!! I used the clear tape to set the cover sheet at the beginning, and also use it to lift the cover to remove bubbles caused by tiny dust around the edge.
Cool story bro
I tried same technique for tempered glass SUCCESSFULLY & very easily, effortlessly :)
thank u so much :)
I finally put a screen protector on my phone perfectly thanks to this video!
Thanks this helped me a lot! I love the fact I don't have to worry about dust and bubbles!!
Your technique is wonderful, I'm adding your products in my cart right now.
the best system I've seen so far !
Well I watched this AFTER applying my screen protector with many air bubbles so that’s great!
Thanks. I installed mine today and this video really helped
Best way i've ever seen. Just did 2 phones almost flawless with just celo-tape.
Thanks man I’ve bought like 5 screen protectors and I finally got it using the tape like u did ! ☺️
This is the right way to put a film. I did just like that, and zero bubbles. Thanks.
I bought six of these for my new HTC One M8. I followed the instructions to the "T". It worked perfectly, no bubbles and no dust. Absolutely perfect....except for one minor complaint.
For my HTC One M8, the screen protector is about 2mm too short, so there is a 1mm gap at the top and bottom. Same goes for the sides. Because I am using an awesome case, you don't see the gaps on the sides as they are covered, but the one at the top and bottom really bugs me. I realize they may have done this on purpose to make aligning the protector a little easier, but I really prefer protectors that fit perfectly. Because of this, I can only give this protector a 4/5. The application method is excellent, but the fit isn't all that great.
This video helps me a lot, first time without bubbles, thanks!
nice video, nice trick with dust at the bubble in the end
They make it look so easy, but then when I go to do my screen protector I balls it all up. But I purchased the iPhone 8 Plus 256gb silver applied the glass screen protector and did a really good job no bubbles or any dust I was so pleased with myself 😊😊
My god Im so happy i got this screen protector. I completely screwed my first one up, It came with spray, and was terrible.
The things this comes with is genius and really help you get it on bubble free. Im so ocd with my screen protectors. this is the first one that I truly like.
This guy is a professional!
WARNING!
What I`m about to write will totally help you. I have totaly followed your instructions, but I had terrible bubbles. I was prepared to trow away the foil but I had an ideea, what if, I just wash the foil with soap and just give it another try.
It totally worked!!! I didn`t even dried the foil, I let the small drops of water on the foil, and now I have no bubbles and the foil sticks very well.
Please make a video showing this cost saving method!
Thanks!
Thanks a lot, you're my savior :)
Background Music is great!
Thanks! I love that even when something comes with no instructions, some kind souls will have made a video!! Good karma! :)
Woow Dude !!!! Perfect presentation + Amazing music. Thank you so much :D
Just installed a citigeeks screen protector on a samsung Galaxy S4 Mini following this video and it went flawlessly! Thanks so much for making this video and saving me some frustration. I usually end up ripping the screen protectors off my devices because bubbles drive me insane! wont be with this one. :)
I love this song you're using here guy!
Thanks, I haven't tried it yet. I have seen many other videos, but this seems the best.
I used this way, but I would recommend using some glass cleaner after taping on the protector, makes sure there is no oils from your skin
Very nicely demonstrated! Thanks for sharing. Thumbs up!
Thank you your way taught me to use Scotch Tape to remove any dust left under the screen protector
Best method yet. Thank you a lot
I already happened to order a tempered glass protector, but I'll be using this method to install it. I don't believe it comes with the two stickers they show toward the end, but I think I can manage to rig some tape if needed.
I wanna know what type of screen protector you use because its very easy and bubbles free basically .....
Eliany Morales The makers of this video, CitiGeeks, make screen protectors. They use those ones in this video. Best ones I have ever used, period
Very good job man... i always use screen cleaning spray and rub it ojt with a card... but when i buy protectors i dont get that huge adhesive sticker.. thats handy
There was an element of luck on the first try, sure I'll do better next time. Worked well enough.
Awesome tutorial! Thanks for making this!
You are very welcome. Enjoy!
I have a Nokia Lumia 930, where can I purchase a screen protector like this? This is amazing, I can never apply a screen protector without the massively big bubbles that really irritates me.
u make it look so easy
thanks for posting
I highly recommend you have some practice at this before doing it this way. He made it look very easy and I had a much more difficult time than he did.
This helped me a lot, sadly I didn't get it prefect... well I can always order more screen proctors and try again.
It is always a better idea to work the cloth from the center, outward... starting in the center and working toward the edges. This is particularly important in the presence of persistent bubbles.
1:41 wow!! Amazing....truly satisfying
Matte screen protectors are SO much nicer than the shiny ones. They feel better too.
Yes, matte is better, it completely demolishes your vibrant screen. More enjoyable experience watching movies on your phone with screen grain on it.
I prefer it to having everything reflecting off of it, making it near impossible to see anything.
My matte screen protector works just fine for me XD
if there is a bubble how do you know if its on the screen or the screen protector so that you can remove it with the tape?
sooo easy 😂, I been trying to get mine on for 50 minutes, I should try this next time
Thank you.. it works like a pro👍
I just tell my brother to do it
He does it awesome with no bubbles at all
Can I share this video on a website as direction to put screen protector?
dude!!
your skill!!!
OMG!!
u rock man!!
Thanks!
Use the vacuum cleaner, place the nozzle stationary next to the phone screen before placing the protective screen, that would suck all the dust that is invisible and flying through the air.
where can i order these citigeek protector packages? i need one for galaxy alpa
+se dde www.citigeeks.com
se dde
se dvd 🎶
Where did you buy this and how much was it???
At what age did you receive your hogwarts letter?
That's AMAZING I WOULD HAVE NEVER THOUGHT OF DOING THAT!. 😁😁😁
Thanks mate really helped i got 3 mini bubbles but i was able to remove them with my bank card :D
why do I find this satisfying?
u have ocd
Nice! Pretty cool techniques!
Nice music.
No matter how hard I try I always seem to get a speck of dust or hair under the protector, that's why now I run the shower so all the steam means there's no dust in the air and now works perfect every time
Just the tip with the tape at the beginning is usefull
Why is my screen guard making a layers of colors when screen is white moreover what to do of these two rectangles ( part of screen guard) on the tops a few bottom
that just felt so good. thanks i'll be doing it this way.
absolutely brilliant. Thank you so much!
can I apply it to my eyes 👀?
Thanks!! This video helped me alot!
Well I actually cutted an ipad screen protector to fit my galaxy mega,and I did just great! BUBBLE FREE! :)
I usually dip my screen protector in rubbing alcohol then apply it to the screen. Just did it for my PS Vita, and when i push the bubbles out its just air pockets.
Good video, learn a lot of useful
This seems easier to install than the Amfilm model protectors for the iphone 6
omg im so impressed! i need these!!
Was your phone transparent?
worked perfectly thanks dude
Excellent video
great techniques!! but will it work on iphone 6 because of the curved edges? can anyone help
I'm putting mine right now and i'm having problems lol
Bethzy Espiritu i tried once and it failed miserably, i guess i will just stick to the original way....
I prefer screen protector than tempered glass as when glass breaks, it looks much annoying and it is also thicker
very cool video
excellent work
thank you! I did mine.