I just installed mine, please make sure you peel the two middle sticks out just a little before applying. One of the blue tabs ripped off for one side and I had a hell of a hard time removing the tape liner afterwards.
I would definitely go this route. Many factory "body kits" and appearance packages have been stuck on with tape for years. I would not worry about it moving at all.
my dad had bought a model s ~2015 and they sold a carbon fiber ducklid spoiler as an option. FF 4 years and he replaces it with a new S bc it gets totaled, kept the spoiler, used 3m. 3 years later and still hasn't budged. 3m works y'all. CW to get this for my BRZ
You are genius for that tape line up technique!!!! Proper alignment was my main concern on skipping out on drilling and you solved it. If I live in a cold climate, do you recommend I blowing the spoiler with a hairdryer after installing?
If you are planning on installing in the cold I would try your best to keep the trunk surface and tape warm with a hair dryer or heat gun during the install. And because it's cold the 3m tape can take longer to cure so I would just be mindful and try not to drive the car for a few hours if possible! Hope this helps!
How’s the paint match from the spoiler to the body? I’ve seen some guys with the Halo white / CWP paint mentioning that their lip spoiler doesn’t match perfectly in different types of lighting due to the fact that the white is a 3 stage pearl. Is it 1:1 match or a bit off in some lights?
Honestly it matches great, it looks factory, definitely very close, if you dm dane@importimageracing.com he can take some pics in many different lightings for you!
Check out our videos on our Noble lighting upgrades. We have replaced the trunk, reverse, and interior. ua-cam.com/play/PLk0_IqtufiW4L3_KHv-TCRk2yevRzePvg.html
@@ImportImageRacing Do you guys have any on the door convenience lights? Would be sick to see some brighter ones! Or even some designs like some in the Q50 and Q60!
I saw a comment regarding a cold climate. If I do this install it will be in the summer so proper curing won’t be a problem. The temperature here, however, can drop below freezing in the winter. How well does the 3M tape hold up in freezing temperatures? I have found that returning a car to stock form gets a higher price when it comes time to sell/trade in. After pulling off the spoiler, what is the best way to remove the tape and tape residue without damaging the paint? Thanks for posting this video!
As long as the installation is performed with proper care, in proper conditions, with proper curing, the colder climate should not effect the bond greatly. As far as removal, removing that bond can be very difficult if properly installed. Heat and fishing line will be your friend. Goo Gone, some elbow grease or a buffer will finish the job!
Think the tape would hold up to a drive thru friction car wash with the big brushes/rollers etc? Sometimes, especially in cold temps when the car is salt covered I utilize these types of washes.
Should be perfectly fine! It took us A LOT of force and effort to remove this one to test fit a prototype Spoiler. We have been selling ducktail Spoilers that install solely with 3m tape for the wrx for years now with no issues!
To give you a good idea. We removed ours to test fit another Spoiler. It took 2 guys pushing up on the back of the Spoiler to pop it off and it took about 10 tries and each time the entire rear end of the car came up with the Spoiler lol
Unfortunately it wasn't offered in that color. Aftermarket Will eventually come in and supply that color. Nobke performance has them on the way already but getting an unpainted one from our website and having it painted is the best option for now until more paint matched Aftermarket ones become available
@@maryburgess9293 I noticed there are 2 types of 2022 GR86/BRZ spoiler......What is the difference between the Noble TRD Style Spoiler (Paint Matched Options) - 22+ BRZ / GR86 VS Toyota TRD GR Trunk Spoiler Unpainted - 2022+ BRZ / GR86? Is one an imitation/generic kind while the other is an original TRD part??
Unfortunately Toyota doesn't make WRB as an option for the spoiler. But don't worry, we will definitely have more aftermarket options soon that will include WRB!
Don't worry. Where Toyota or subaru didn't see a need to supply them in the subaru colors, we will have some OE Style Spoilers soon available in subaru colors as well!
I just installed mine, please make sure you peel the two middle sticks out just a little before applying. One of the blue tabs ripped off for one side and I had a hell of a hard time removing the tape liner afterwards.
I would definitely go this route. Many factory "body kits" and appearance packages have been stuck on with tape for years. I would not worry about it moving at all.
The OEM parts always get the forbidden double sided tape too. No one knows for sure what it is, but its super strong!
my dad had bought a model s ~2015 and they sold a carbon fiber ducklid spoiler as an option. FF 4 years and he replaces it with a new S bc it gets totaled, kept the spoiler, used 3m. 3 years later and still hasn't budged. 3m works y'all. CW to get this for my BRZ
You are genius for that tape line up technique!!!! Proper alignment was my main concern on skipping out on drilling and you solved it.
If I live in a cold climate, do you recommend I blowing the spoiler with a hairdryer after installing?
If you are planning on installing in the cold I would try your best to keep the trunk surface and tape warm with a hair dryer or heat gun during the install. And because it's cold the 3m tape can take longer to cure so I would just be mindful and try not to drive the car for a few hours if possible! Hope this helps!
Just got mine in the mail thank you guysss!
That's how I'm exactly gonna do it 💯🔥
Ours has held up great after driving around a few times with it. Even tried forcefully removing it to make sure it was good and it didn't budge!
How is the paint match on the crystal white pearl? I have a white brz and looking to purchase
CWP is the hardest color, so realistically 90%
How’s the paint match from the spoiler to the body? I’ve seen some guys with the Halo white / CWP paint mentioning that their lip spoiler doesn’t match perfectly in different types of lighting due to the fact that the white is a 3 stage pearl. Is it 1:1 match or a bit off in some lights?
Honestly it matches great, it looks factory, definitely very close, if you dm dane@importimageracing.com he can take some pics in many different lightings for you!
Can you guys do a full lighting upgrade guide on the interior, door convenience lights, and trunk light?
Would be awesome to see how you guys do it!
Check out our videos on our Noble lighting upgrades. We have replaced the trunk, reverse, and interior.
ua-cam.com/play/PLk0_IqtufiW4L3_KHv-TCRk2yevRzePvg.html
@@ImportImageRacing Do you guys have any on the door convenience lights? Would be sick to see some brighter ones! Or even some designs like some in the Q50 and Q60!
These videos are amazing!
I saw a comment regarding a cold climate. If I do this install it will be in the summer so proper curing won’t be a problem. The temperature here, however, can drop below freezing in the winter. How well does the 3M tape hold up in freezing temperatures?
I have found that returning a car to stock form gets a higher price when it comes time to sell/trade in. After pulling off the spoiler, what is the best way to remove the tape and tape residue without damaging the paint? Thanks for posting this video!
As long as the installation is performed with proper care, in proper conditions, with proper curing, the colder climate should not effect the bond greatly. As far as removal, removing that bond can be very difficult if properly installed. Heat and fishing line will be your friend. Goo Gone, some elbow grease or a buffer will finish the job!
Think the tape would hold up to a drive thru friction car wash with the big brushes/rollers etc? Sometimes, especially in cold temps when the car is salt covered I utilize these types of washes.
Should be perfectly fine! It took us A LOT of force and effort to remove this one to test fit a prototype Spoiler. We have been selling ducktail Spoilers that install solely with 3m tape for the wrx for years now with no issues!
New subscriber and GR86 owner here. Love the videos. Can I ask the wheel and tire specs on your video car?
Stock tires with cosmis XT206R 17x8 +30
@@ImportImageRacing Thank you. I’m purchasing Gram Lights 57CR 17x9 +38. I love the way your car looks on 17s.
Great tutorial! just wondering if it feels secure enough when pressing it after the adherence reached its full strength without the bolts?
To give you a good idea. We removed ours to test fit another Spoiler. It took 2 guys pushing up on the back of the Spoiler to pop it off and it took about 10 tries and each time the entire rear end of the car came up with the Spoiler lol
@@ImportImageRacing lol good to know that, thanks
Same procedure with carbon fiber style?
Yes absolutely the same!
@@ImportImageRacing thanks
@@bhaliwka1091 anytime :)
FINALLYYYY whats the expected wait time to get one sent to Melbourne Australia?
Email our sales team and we should be able to give you a quote and ETA! SALES@IMPORTIMAGERACING.COM
So if you have WRB your basically screwed right ? Can’t find a paint matched one with that color .
Unfortunately it wasn't offered in that color. Aftermarket Will eventually come in and supply that color. Nobke performance has them on the way already but getting an unpainted one from our website and having it painted is the best option for now until more paint matched Aftermarket ones become available
I'm gonna steal your rear spoiler haha!
I thought the BRZ limited came with a spoiler or am I thinking premium gr86?
The premium GR86 comes with this Spoiler but the BRZ and the base GR86 does not.
Mine didnt come like this😐 instead i got the roll that i gotta put on
Unfortunately, that’s how the manufacturer is shipping them these days!
Can I ask what brand and size wheels/tyres you are running there boss?
Stock tires with cosmis xt206r 17x8 +30. They're available in tons of sizes and colors though as well.
Any chance you guys will be making the color for Gray?
in stock now, will add to site on monday :)
@@maryburgess9293 I noticed there are 2 types of 2022 GR86/BRZ spoiler......What is the difference between the Noble TRD Style Spoiler (Paint Matched Options) - 22+ BRZ / GR86 VS Toyota TRD GR Trunk Spoiler Unpainted - 2022+ BRZ / GR86? Is one an imitation/generic kind while the other is an original TRD part??
Do you have one in WR Blue?
sure do! www.importimageracing.com/products/noble-trd-style-spoiler-paint-matched-options-22-brz-gr86?variant=39533789249632
I live in Texas is the heat going to melt the tape?
No we are in the bottom of Florida with more humidity.
F1 brake light please.
Is the red from the 86 the exact same as brz ignition red?
Both ignition Red and Track red are the same paint code (DCK)
I noticed no WR Blue? Will you be stocking?
Unfortunately Toyota doesn't make WRB as an option for the spoiler. But don't worry, we will definitely have more aftermarket options soon that will include WRB!
I tried this and my spoiler fell off at 120mph! Don't do this!!!
Only one so far :( This is one of our best sellers.
the OEM GR86 spoiler or something else?
Does anyone know if crystal black silica is the same as raven? (86)
Crystal Black Silica is the exact same paint code as Raven. (D4S)
@@ImportImageRacing I just ordered it. Thank you!
@@boostd4058 Thanks for your business!
Are there any duckbill replacements coming ? Duckbill for me is too ugly. Want an actual blade style spoiler on my gr86 premium
We should have some different style duckbills as well as some standard higher rise spoilers. No ETA as of right now though
@@ImportImageRacing looking forward to it.
No ice silver. :(
Don't worry. Where Toyota or subaru didn't see a need to supply them in the subaru colors, we will have some OE Style Spoilers soon available in subaru colors as well!
Hey its @street inspired!
Eyyy that's me! Lol
Salut my friend super car super video subscribe subscribe
Seem like it Toyota could have made it a better fit.