How To Replace The Gas Valve On A Napoleon Gas Fireplace
Вставка
- Опубліковано 7 лип 2024
- All my favorite HVAC tools: www.amazon.com/shop/thediyhva...
Hello! In this video we walk you through how to replace the gas valve on your Napoleon fireplace. This was a pretty easy fix and only took me about an hour from start to finish. I hope you find this video helpful and you can get your heat restored! Make sure and leave this video a like, and consider subscribing to our channel! Cheers all
IF YOU ARE IN NEED OF GUIDANCE WITH YOUR HVAC SYSTEM, whether it is diagnosing a bad part, replacing your system, or help with sizing, check out our membership program here: / diyhvacguy
For a small monthly fee of $25, you will get assistance from myself when it comes to your hvac needs, whether it's sizing, diagnosing, or locating the correct equipment.
⚠️ Disclaimer:
This video is for educational purposes. Any and all HVAC repair work is done at your own risk. The DIY HVAC Guy channel is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
00:00 Introduction
00:12 Shut of gas
00:23 Remove front glass
00:38 Remove logs
00:48 Remove base plate
01:10 Disconnect gas valve
01:24 Loosen main gas supply line
01:47 Disconnect pilot and main burner supply lines
02:31 Move fittings and bracket to new gas valve
03:40 Reassemble in reverse order
This was really helpful. Thank you! The process was also relevant for my Heat & Glo unit.
Good to know , thanks .
Pipe Dope 🤙🏽
My plate has red silicone bonded to it, do I need to remove that to take it off?
Very nice video Thank
Thanks for visiting!
I don't understand your choice of vice grips and pliers for pipe fittings that have flats for wrenching on????
He’s a DIY guy that’s why
@@victork3397 I'll take that ... I appreciate his work anyhow.
How to fix the tail on your own cat
Soapy water? Hope you don’t use that on refrigerant tubing! It will corrode and eat a hole in the copper.
Hah ok..
@@diyhvacguy
Don't use anything that isn't formulated for HVAC use. Dawn and other detergents have ammonia and other compounds that can and will corrode copper, but the stuff you buy at the supply house should not.
Doesn't matter. Not putting it on there everyday...