How to make a plant watering system with ESP32 board and Blynk app

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 122

  • @abhilashreddydereddy5397
    @abhilashreddydereddy5397 Місяць тому +2

    you should caliberate the sensor for it to show correct water percentage readings, thats the reason why its not crossing 60.

  • @JacobTheRandom
    @JacobTheRandom 25 днів тому +1

    You posted a Christmas song in May and I can respect that

  • @mokil3054
    @mokil3054 7 днів тому

    nice

  • @PK_INFO2
    @PK_INFO2 8 місяців тому +1

    Bhai external kidhar sey connect Kiya hey please batao n

  • @naeljaem9067
    @naeljaem9067 4 місяці тому

    May I ask, for esp32 board adapter can I use another version?

  • @josephdaquila2479
    @josephdaquila2479 9 місяців тому

    Can I use PWM to allow pump to pump fluid at different rates?

    • @sritu_hobby
      @sritu_hobby  9 місяців тому +1

      Yes you can!

    • @josephdaquila2479
      @josephdaquila2479 9 місяців тому

      @@sritu_hobby sweet so I would just use a pwm pin to generate the signal?

  • @jacobpanot9367
    @jacobpanot9367 9 місяців тому

    can i use this on capstone right?

  • @simranmodi7607
    @simranmodi7607 9 місяців тому +1

    I am making this project using esp32 but I have 2 problems firstly the LCD moisture sensor is not working and secondly the motor is not connected to the phone on/off pls help pls requested

  • @Nczxsy
    @Nczxsy 22 дні тому

    Why are you use 3.3v for 5v relay?

  • @pianoplanet8198
    @pianoplanet8198 11 місяців тому

    Does the mobile is there only to on and off the motor?

  • @JAYNAKUM6123
    @JAYNAKUM6123 24 дні тому +1

    What is external

  • @manuelaldairmorenojurado5935

    hi!
    I was wondering if I can supply the 5v Water pump with de 5v output from the esp32 not with an external battery

  • @eldrickashlymeyrick1052
    @eldrickashlymeyrick1052 11 місяців тому

    hey is it possible to add fertigation system into that setup?

  • @theuniqeguys1112
    @theuniqeguys1112 Рік тому +1

    It can opearation automaticly?

  • @arpittiwari3931
    @arpittiwari3931 6 днів тому

    ye code kai pe open kiya hai bro ...???

  • @patricklacerna3510
    @patricklacerna3510 Місяць тому

    Can i use 3v battery as power for nodemcu?

    • @wasd345k
      @wasd345k Місяць тому

      probably not as most are 5 - 12 v

  • @kvbalakumar6854
    @kvbalakumar6854 2 місяці тому +1

    What is mean by extenel pin

  • @Dashing_Arnav-s6v
    @Dashing_Arnav-s6v 5 місяців тому +1

    Which Jumper wire we have to use male to female or male to male or female to female

  • @Zifahho
    @Zifahho Рік тому +1

    How can the 5v relay work in 3.3 v board

    • @butterchickenSTREAM
      @butterchickenSTREAM Рік тому

      It has a 5V output pin that doesn't interfere with the other pins so this can be used for outputting

  • @henrichbryanchiongmaya6709
    @henrichbryanchiongmaya6709 Рік тому

    what you use in external with aligator wire?

  • @jacobpanot9367
    @jacobpanot9367 9 місяців тому

    where did you get the code ? or it is automaticly code imean automatic theres a code there?

  • @talha9276
    @talha9276 Рік тому +1

    What will be the code if we use Arduino cloud instead of blynk

  • @dhritishah7472
    @dhritishah7472 2 місяці тому

    I sir i have 38 pin esp32 wroom can i do this on my 38pin esp ?

  • @suyashamudan7503
    @suyashamudan7503 Рік тому +2

    how can i get the libraries mentioned in the arduino code?

  • @VARUN_GAMING_7779
    @VARUN_GAMING_7779 6 місяців тому +1

    Bro can we use this with Arduino Uno
    If yes pls comment

    • @sritu_hobby
      @sritu_hobby  6 місяців тому

      No

    • @VARUN_GAMING_7779
      @VARUN_GAMING_7779 6 місяців тому

      @@sritu_hobby
      Can u give ur number to call you pls

    • @VARUN_GAMING_7779
      @VARUN_GAMING_7779 6 місяців тому

      @@sritu_hobby
      I have some doubts

    • @VARUN_GAMING_7779
      @VARUN_GAMING_7779 6 місяців тому

      @@sritu_hobby I am making a project for inspire award manak
      And I got selected for first round

    • @VARUN_GAMING_7779
      @VARUN_GAMING_7779 6 місяців тому

      Bro pls I need reply fastly

  • @NaineshPadarthi
    @NaineshPadarthi 6 місяців тому

    broo total program cheebutharaa pplzzz ...
    this isour final year project...undesstand..

  • @dadan1578
    @dadan1578 6 місяців тому

    can i use esp8266 instead of esp32 in this project?

    • @sritu_hobby
      @sritu_hobby  6 місяців тому

      You have to change the code

  • @amazing_videos948
    @amazing_videos948 8 місяців тому

    Can you please name the libraries to install in Aurdino IDE?

    • @sritu_hobby
      @sritu_hobby  8 місяців тому

      Blynk library

    • @amazing_videos948
      @amazing_videos948 8 місяців тому

      @@sritu_hobby i am having problems with the libraries...i downloaded it from your web and also extracted in the libraries folder but still now working. What should I do?

    • @amazing_videos948
      @amazing_videos948 8 місяців тому

      @@sritu_hobby can we use esp32 without the adapter if yes then how will we power it?

    • @sritu_hobby
      @sritu_hobby  8 місяців тому

      Please use two breadboards

  • @gauravmishra1696
    @gauravmishra1696 2 місяці тому +1

    What is the cost

  • @AddityaNayottama
    @AddityaNayottama Місяць тому +1

    thank you my brother

  • @sarbeswarrout-v8q
    @sarbeswarrout-v8q Рік тому +1

    By what did the esp32 is powered!? Pls help

    • @sritu_hobby
      @sritu_hobby  Рік тому +1

      Please use a 9v battery

    • @sarbeswarrout-v8q
      @sarbeswarrout-v8q Рік тому

      Thank you soo much for the help

    • @sarbeswarrout-v8q
      @sarbeswarrout-v8q Рік тому

      Can you pls tell me that... We need toh add that library files externally or just simply copy and paste the code from the website.

    • @AnkitKumar-dj5my
      @AnkitKumar-dj5my 2 місяці тому

      Can I use type C

  • @fatwamulhan2135
    @fatwamulhan2135 6 місяців тому +1

    Hello! i wanna ask you something. What if i dont have ESP32 board adapter. It's just ESP32 board in my box that i have. Thank you. and im waiting for the answr

  • @mohamedriflan8263
    @mohamedriflan8263 Рік тому

    Working some small period time. after Display got struck and then total System Crashing. What I should Do?

  • @chaduvulapujitha4365
    @chaduvulapujitha4365 Рік тому +1

    Is battery necessary?
    If battery is used how much capacity battery you bought

  • @jeancorrea3880
    @jeancorrea3880 9 місяців тому

    where should we install the librairies zip files?

    • @sritu_hobby
      @sritu_hobby  9 місяців тому

      Check our website project

  • @BawiEdits
    @BawiEdits Рік тому

    Wow that looks amazing can't wait to try it

  • @VIGNESHPECE-b1d
    @VIGNESHPECE-b1d Рік тому +1

    0:44 / 6:03

  • @channelfarrel630
    @channelfarrel630 6 місяців тому

    Why modul relay cannot on/off?

  • @paolapinacastillo7726
    @paolapinacastillo7726 Рік тому

    Why did you put pin 2 in the sensor????

  • @elestoari
    @elestoari 9 місяців тому +2

    I've heard that the two-legged probe/sensor usually breaks after just a few days of use because the metal strip corrodes quickly. It is true?
    if it is true I have to buy many two-gauge probes/sensors and change them every time they break or I can use the "operational control module" circuit connected to a handmade probe/sensor with two copper strips of the same size connected in the same way to the operational control module? thank you so much, great video!

  • @tsabithaazzahra8690
    @tsabithaazzahra8690 18 днів тому

    What the program link?

  • @muhammadrifaizhdw3069
    @muhammadrifaizhdw3069 11 місяців тому

    Hi, I'm working on the same project but I have a problem, every time the relay turns on the LCD screen gets an error, do you know the cause?, and what is the solution to this problem?

    • @mammam11
      @mammam11 2 місяці тому

      Because you might not have the liquid crystal latest library in the Arduino ide

  • @anshumaanaadya5881
    @anshumaanaadya5881 7 місяців тому

    How much is its cost?

  • @احمدرمضان-ي3د9و

    في فيديو arduino obstacle avoiding + bluetooth control robot هل يمكنني استخدام bluetooth module HC-06 بدلا من HC-05

  • @aravindkrishna6042
    @aravindkrishna6042 Рік тому

    What would the total costing be for this?

  • @regino6573
    @regino6573 4 дні тому

    The site is not working, please reply and solve the problem

    • @sritu_hobby
      @sritu_hobby  4 дні тому

      Please check it again

    • @regino6573
      @regino6573 4 дні тому

      @sritu_hobby Yes, the problem is solved thank u .

  • @tita9506
    @tita9506 11 місяців тому

    I have tried the tutorial from this video, but the program code you shared is wrong. The video and reality don't match, this makes it difficult for me to complete the program

    • @ulfarahawarin1362
      @ulfarahawarin1362 6 місяців тому

      Apakah kamu sudah berhasil ?, saya juga ingin mencoba dan sekarang saya masih membeli beberapa alat yang di butuhkan.

  • @asggaming5390
    @asggaming5390 Рік тому

    sir please make a vedio on hoe to make a land mine detector using aurdino uno

  • @JAYNAKUM6123
    @JAYNAKUM6123 17 днів тому

    Water pump direct starting

  • @nickyherpati3289
    @nickyherpati3289 Рік тому

    ur code is not working n thre are many problem with ur code template n library. I dont understand there are too many differences when I apply your video sir. Thank you

  • @TomGani-x4y
    @TomGani-x4y Рік тому +6

    Sir code is not working

  • @ahmadsyazwanabdulhadi5478
    @ahmadsyazwanabdulhadi5478 8 місяців тому

    sir can help me why this code not working

    • @ahmadsyazwanabdulhadi5478
      @ahmadsyazwanabdulhadi5478 8 місяців тому

      after i upload have something error compiling for board esp32 dev module

    • @alex.sneakers1015
      @alex.sneakers1015 Місяць тому

      ​@@ahmadsyazwanabdulhadi5478 Were you able to figure out the code for esp32 dev mode?

  • @rohitroshan5748
    @rohitroshan5748 2 місяці тому

    This code don't match for ESP32 DEV MODULE

    • @alex.sneakers1015
      @alex.sneakers1015 Місяць тому

      Did you figure out the code for ESP32 DEV MODULE?

  • @unicool2011
    @unicool2011 Рік тому +1

    What about coding?

  • @gajanan_shelke9009
    @gajanan_shelke9009 Рік тому

    Anyone can send simulation link..

  • @syahmihaziq6165
    @syahmihaziq6165 Рік тому

    where the crocodile clip goes to

  • @gowrishankar.mmanoharan2019
    @gowrishankar.mmanoharan2019 8 місяців тому

    Code is wrong,send correct program please

  • @gesadutechnic
    @gesadutechnic 3 місяці тому

    no working bro.all wires 16 cheks.

  • @variable7117
    @variable7117 8 місяців тому

    Your library links on the website is busted, I2C LCD is now password and Blynk turned into Adafruit-PWM-Servo-Driver

  • @ghalitsar2730
    @ghalitsar2730 6 місяців тому

    sir why does my pump wont off even the relay-value is already to else section the pump still ON , i was log the output of the "relay- value" and the result is correct the value is already 0 but the relay/pump wont stop sucking water , and i look to the serial monitor after i put serial.println in "if else" both of the section .. and the "relay-value" show 1 when i click on and show 0 when i click off but the

    • @ghalitsar2730
      @ghalitsar2730 6 місяців тому

      do you think this issue is happened from the battery->relay ?

    • @ghalitsar2730
      @ghalitsar2730 6 місяців тому

      found my problem sir , the relay is the problem
      thank yu

  • @abdansyakura1221
    @abdansyakura1221 7 місяців тому

    Where is the code

  • @maisaeraa
    @maisaeraa 7 місяців тому

    can i get the full coding pls

  • @GamingChannel-wr7fv
    @GamingChannel-wr7fv Рік тому

    Please help me

  • @rahimhyder1341
    @rahimhyder1341 Рік тому

    Teku nai ata

  • @maihumogambo1055
    @maihumogambo1055 Рік тому +1

    amazing video bro please pin me