In my older Elantras, it wasn't near so ridiculous to change simple bulbs. I have small fingers, but the way they design these cars anymore it makes you want to take it in just to save yourself the trouble, almost. Or maybe that's just me. Thanks for this video! It is great!
Finally a proper video that shows how to remove everything in order to get to the headlight bulb. This car is extreamly annoying to get to anything because most cars u just pop hood unscrew some bolts and your all set.
I was actually able to get the bulbs in and out without all the other work. Driver side is a very very tight fit. My hand now looks like I got in a fight with a cat.
Can you please tell me whether or not there’s a specific direction to actually get the bulb out? I’ve unclipped it but the bulb won’t come out!! please help
Really good instructions. I only deviated from this in that I had a jack to lift the car on either side while I worked in the wheel wells and under the bumper just to give myself a bit more space to work in. Also the bumper as well as the headlights came off in one thing so I don't know if I missed something of that but I just disconnected the lower grey connectors and just moved the whole lot over to the grass in my front yard to work on replacing the bulbs
Hey friend just wanted to say thanks for your video I just changed out the light bulbs on my girlfriend's car I did see the one that they took the wheels out to get to it from the wheel well and yah that looked a lot more aggravating than what I needed to be but I prefer your way thanks again
I don't own an Elantra but this video is helpful nonetheless. I have Hyundai Accent 2019 and it's almost impossible to remove/install bulbs on the driver side so I had to do it this way. Thanks!!!!
Oh man, I'm so sorry you didn't see my video on this. You can do it through the fender well without taking the whole thing out, and it is really stupid that this is an issue at all. Total fail on Hyundai's part.
Great video, not a lot of videos on this car. My wife has this car and if it were mine I'd start tearing everything off to see how it goes together again, but she'd get pissed. I'm not going to do it this way, but good to know. You can also do the bulbs going through the wheel well and some people with tiny hands can actually do it from the top. I can get the passenger side one out from the top going slowly, but not the driver's side. Now I just need to figure out the reverse lights to put brighter ones in.
This video was awesome it’s just unfortunate you gotta go through all this trouble just change a few bulbs. I have a 2020 ELANTRA and want to change the headlights but so much drama to do it.
Yeah I started out going thru the wheel well myself but on the 2019 we now have my hand still wouldn’t fit in there well enough to turn the bulb so had to do it this way! We had a 2016 and I told my wife what a pain this was but said watch they’ll find a way to make it even harder and sure enough they did now the unibody is in the way and there is even less room, SMH! I bet the mechs at dealerships want to beat the hell out of the engineer who designed this, I know I do and I only have to do it once in a great while!
Thanks for this video, you did a great job! I started to go thru wheel well as some people have suggested but it was still too tight to turn the bulb inside its case to remove it. So I did it this way! So again thank you!!!
the vid took so long but i was super helpful thank you a lot Mcphill now I know the green cable is + and I need the tool to remove the clips* i can't stress how much I'm thankful thaaaaaaaaaaaaaaaaaaaaaaaaanks aloooot
Jesus what a royal pain in the ass!! I commend and appreciate your patience! This helps me some as I do my 2022 N line. Helps as far as the connections and what the setup will be like or similar too. I believe I’m fortunate enough to get my hands down to finish the job. Take that nice Skagen timepiece off before your scratch it.
I just got a 2019 Elantra sel and your videos have been a lifesaver lol. I just ordered some leds for the headlights similar to the ones you just installed. Does the external driver get too hot inside the dust cover? Should I leave the dust cover off?
The reason your beam is like that is because projectors are not compatible with cheaper LED bulbs, since a projector requires a lot of forward lighting, that’s why HID are the preferred for halogen projectors
Actually I've tried 3 different kinds of led bulbs and the best ones are the cheaper ones, beam pattern is all about where the chip is on the bulb housing
@@travisspaulding9540 Just to answer this, no. The HID's actually are very similar in terms of install, but actually have a metal bar that requires removing two screws to uninstall/install. I'm blown away I'm going to have to remove a bumper and headlight assembly to remove a bulb...
John Jackson yes I raised up the lights but now other drivers think I have my high beams on, but at least I can see. I think this is a serious flaw with this car that Hyundai needs to address.
Thank you for this video, I plan on doing this with my elantra, I have the exact same model and colour. I'm a beginner and didn't know how to do these features on the headlights as I always leave it on auto. Thank you so much for this.
literally taking my hyundai 2020 up to the dealership today because i'm having problems with my " daytime running light " on the right side. got new lights & it's still not operating. the lady at a car store told me my light connector isn't connecting properly
I added those sylvania 1157 led's before watching this video and now I have those warning lights. I'm now in the process of buying the ones u did for the DTR lights. How are they doing so far? As well as your led 9005's?
Thank you Yep pain in the butt Thanks Hyundai Your instructions were amazing my man 👍… you saved me some cash that’s for sure This Stephen from BC Canada… Langley Have cold for me 🍺 Because I’m having one in Your Honour !!! Cheer 🍻 Thanks again to you and as for Hyundai….. up your nose with a rubber hose
Hi i have a question, do you know the clearance or the dimensions roughly on how big the heat sink can be? As i am worried if i buy my LED headlight and the heatsink might be too big? Thank you in advance! Thinking of getting the GTR LIGHTING Ultra 2 or the LASFIT LS Plus series but am concern of the clearance and i am worried it might not fit
I just picked up a 2020 Thursday evening. Looking to do a LED upgrade as well. Did you get any error code for this swap? Crossing my fingers their wasn't any.
They are 1157 bulbs that use double filament. I actually ordered some LEDs for them so I will let you know. I'm pretty sure it will not show an error message but we will see lol
@@darrencalderon yep that's correct, I also have no idea why but they use a dual filament bulb for the turn signals in the front from the factory and only have a hot a neutral wire running to the base?!?!?
MCPHILL oh really that’s really odd lol you would think the turn single would only use a single filament maybe for ease of manufacturing they kept the dual filament bulbs for assembly haha
They're high beams but the projector allows them to be dual purpose. When you activate the high beams you'll hear an actuator move in the headlight assembly. I have 9006 and 9005 in my older car.. Each have their role as separate bulbs
There's around 4-5 clips you can take off and if you push hard enough, you can "pop" the wheel well down and fit ur hand in there without having to fuss over taking the bumper out. Good video though. Annoyed that I have to adjust my set more on the passenger's side 😒
jesus christ. I have a 2019 and the stock bulb just finally died for the first time so I have to replace it and decided to look it up before just trying to do it. I'll never understand why they can't just make bulb replacement accessible without all this bullshit. it should be a 2 second job, not a hour long process of taking your entire front end apart.
Any idea why my passenger light always is in high beam mode??? I hear a click from the drivers side and it goes from low to high just fine but my passenger side stays on high always! My car is a 2019 elantra sel and i bought hikari Led lights from amazon. Im getting peopel flashing me casue my light is always on high beam
@@MCPHILL probably why I’m having problems locating bulbs. Mine is the 2019 Elantra preferred but seems like there are 2 different headlight types for that trim. Very confusing I wish mine was simple like your trim.
At 11:46, did you place the bulb in around the 8 o’clock ? On yours did the led have to be placed at 3 & 9? Just didn’t seem there was enough turn to get at 3 & 9. On your year and mine the headlight assembly looks the same. 20- and my 22. You can’t see the bulb orientation from the outside I think.
This tutorial is WAY too complicated. All I did was unscrew the one screw and those two plastic cap thingies on the left tire he shows here. And I was able to reach my hand in, take off the cap, and take the light out (while attacked to the cable) swap the light, place it back, twist it in, and put the cap on and that’s it. Me right light I could open and take out with my hand there. Took me 15 minutes.
It sucks the lights are so lame in the first place, I have an Elantra work vehicle, liked the warranty and mileage so I bought a 2020 Santa Fe and the lights are bright .
It's ridiculous how difficult they make it for people to do simple fixes such as changing a fucking bulb.
You don't need to take the housing out. You can change it by moving the fuse box or if you have small hands you don't even need to do that.
@@antikommunistischaktion this is bullshit...wife has this car....never again......im into this mess now
@@antikommunistischaktion How the fuck are you going to move the fuse box?
@@JonezBBQ you unbolt it and move it? You only need to move it about an inch you don't have to totally take it out
@@antikommunistischaktion you’re right, I apologize lmao. I didn’t notice the bolt on it before.
Thank you for posting this video! You explained the process PERFECTLY and I was able to change my headlights with no problems!
Glad to hear👍
In my older Elantras, it wasn't near so ridiculous to change simple bulbs. I have small fingers, but the way they design these cars anymore it makes you want to take it in just to save yourself the trouble, almost. Or maybe that's just me. Thanks for this video! It is great!
Ya I think they do that so they make more money off of you lol
yes what a pain. think i will take it in
I'm sure that's EXACTLY their intent. This is BS😡😡😡😡😡
Annoying for sure but worth doing and saving the 80 bucks
No kidding
Finally a proper video that shows how to remove everything in order to get to the headlight bulb. This car is extreamly annoying to get to anything because most cars u just pop hood unscrew some bolts and your all set.
Glad I could help
thankful for this video because it helped me save over $1k. the dealership tried to charge me so much for this!!! 🎉🎉🎉🎉
I just did this in the cold, on my driveway. Such an unnecessary hassle but couldn’t have done it without this vid
I'm glad you got it done👍
The Driver side bulb placement is a design flaw. Going into the wheel well, or even removing the bumper are ridiculous for changing a bulb.
I really earned my "UA-cam certified mechanic" today. Thank you 😅
just for some headlights lol good job
I was actually able to get the bulbs in and out without all the other work. Driver side is a very very tight fit. My hand now looks like I got in a fight with a cat.
Lol I can only imagine
Can you please tell me whether or not there’s a specific direction to actually get the bulb out? I’ve unclipped it but the bulb won’t come out!! please help
@@latonyamiller4116 it's counter clockwise about a 1/4 turn then wiggle out
@@MCPHILL Thank you very much!!
@@latonyamiller4116 Righty tighty lefty loosie lol.
Really good instructions. I only deviated from this in that I had a jack to lift the car on either side while I worked in the wheel wells and under the bumper just to give myself a bit more space to work in. Also the bumper as well as the headlights came off in one thing so I don't know if I missed something of that but I just disconnected the lower grey connectors and just moved the whole lot over to the grass in my front yard to work on replacing the bulbs
Hey friend just wanted to say thanks for your video I just changed out the light bulbs on my girlfriend's car I did see the one that they took the wheels out to get to it from the wheel well and yah that looked a lot more aggravating than what I needed to be but I prefer your way thanks again
Thank you, I appreciate it
Perfect tutorial for my 2019 Elantra. Thank you!
I don't own an Elantra but this video is helpful nonetheless. I have Hyundai Accent 2019 and it's almost impossible to remove/install bulbs on the driver side so I had to do it this way. Thanks!!!!
Glad I could help
Oh man, I'm so sorry you didn't see my video on this. You can do it through the fender well without taking the whole thing out, and it is really stupid that this is an issue at all. Total fail on Hyundai's part.
Where's your video
@@jeansandmyshirt it's here ua-cam.com/video/uO6Lt8CMaco/v-deo.html
hyundai is the worst make in the entire world.
@@anayaxo9007 go give a jeep a whirl and see if you feel the same way
@@icecoldnut5152 Hyundai still sucks lmao.
bro love the vid and props for only using one hand looks great
Great video, not a lot of videos on this car. My wife has this car and if it were mine I'd start tearing everything off to see how it goes together again, but she'd get pissed. I'm not going to do it this way, but good to know. You can also do the bulbs going through the wheel well and some people with tiny hands can actually do it from the top. I can get the passenger side one out from the top going slowly, but not the driver's side. Now I just need to figure out the reverse lights to put brighter ones in.
Ya same here I'm also trying to find a good replacement for the drl next to the headlight
@@MCPHILL We used this for the DRL www.amazon.com/gp/product/B07NQ8YYQJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This video was awesome it’s just unfortunate you gotta go through all this trouble just change a few bulbs. I have a 2020 ELANTRA and want to change the headlights but so much drama to do it.
There is another way to do it if you have very small hands through the wheel well
I went in through tire wheel well, took less then 5 minutes
Ya there are a few ways of doing it
Can you give more info.. did u went thru the fender?
Did you have to unclip the bulb before replacing or do you just turn and pull?
Yeah I started out going thru the wheel well myself but on the 2019 we now have my hand still wouldn’t fit in there well enough to turn the bulb so had to do it this way! We had a 2016 and I told my wife what a pain this was but said watch they’ll find a way to make it even harder and sure enough they did now the unibody is in the way and there is even less room, SMH! I bet the mechs at dealerships want to beat the hell out of the engineer who designed this, I know I do and I only have to do it once in a great while!
Ya they sure don't make it convenient
Thanks for this video, you did a great job! I started to go thru wheel well as some people have suggested but it was still too tight to turn the bulb inside its case to remove it. So I did it this way! So again thank you!!!
The same thing happened to me. I'm going to try jacking it up and taking the wheel off to get more of the wheel well off before I try this.
I found it easier to take the wheels off and pull back the plastic and stick my hand in, takes less time but its slightly heavier work.
The Best of the Best in video explain how change the bulb in Hyundai elantra 2020 . I dont will imagine desmont the bumper for that.I have this model.
Very good teacher. Thanks for this video!
I greatly appreciate that. Thank you
the vid took so long but i was super helpful thank you a lot Mcphill now I know the green cable is + and I need the tool to remove the clips*
i can't stress how much I'm thankful thaaaaaaaaaaaaaaaaaaaaaaaaanks aloooot
احسنت التوضيح ..لقد استفدت كثيرا من ذلك ..شكرا جزيلا...
Jesus what a royal pain in the ass!! I commend and appreciate your patience! This helps me some as I do my 2022 N line. Helps as far as the connections and what the setup will be like or similar too. I believe I’m fortunate enough to get my hands down to finish the job. Take that nice Skagen timepiece off before your scratch it.
Taking half the car apart to change a stinking bulb 💡 🤣🤣🤣
I didn't have to take off the bumper, just forced my poor hand into a tiny crack and boom, done!
Awesome that really made it easy thank you!😊
Glad I could help
I just got a 2019 Elantra sel and your videos have been a lifesaver lol. I just ordered some leds for the headlights similar to the ones you just installed. Does the external driver get too hot inside the dust cover? Should I leave the dust cover off?
Nope no issues at all
Such an educational video 🙌
What is the wire nut with the white wire for?
Also, use a cable-tie for the little LED box, so it can't come in contact with the fan.
The wire nut was when I was testing some lights
Great job and video! Thanks a lot.
Thanks, glad you enjoyed
Thank You so much for the information, btw what light bulb P/N and brand did you get?? what did you ended up using?
Unfortunately, they are no longer selling them. Just look up the highest-rated ones on amazon
The reason your beam is like that is because projectors are not compatible with cheaper LED bulbs, since a projector requires a lot of forward lighting, that’s why HID are the preferred for halogen projectors
Actually I've tried 3 different kinds of led bulbs and the best ones are the cheaper ones, beam pattern is all about where the chip is on the bulb housing
@@MCPHILL Couldn’t I in theory just take the lights from a sport edition and put them in my 2019 Elantra?
@@travisspaulding9540 I'm not sure I have always wondered that same thing lol
@@MCPHILL if nothing but the trim is different, I don’t feel like it would hurt anything. I was just wondering before I bought those lights
@@travisspaulding9540 Just to answer this, no. The HID's actually are very similar in terms of install, but actually have a metal bar that requires removing two screws to uninstall/install.
I'm blown away I'm going to have to remove a bumper and headlight assembly to remove a bulb...
I bought a 2020 SEL and at night a can’t see more than 20 feet in front of the car with the low beams on. Any way to adjust the angle of the lights?
Yes I have a video on adjusting the beams
Did adjusting help the problem? I just bought a 2020 sel as well and can't see anything at night.
John Jackson yes I raised up the lights but now other drivers think I have my high beams on, but at least I can see. I think this is a serious flaw with this car that Hyundai needs to address.
@@marcr830 I agree, I can see better with led headlights but not as good as other cars. I think it's a flaw with their projector design
@@marcr830 I can see alright with my low beams, it's my high beams I can't see with. Going to try adjusting them and see how it goes. Fingers crossed.
Thank you for this video, I plan on doing this with my elantra, I have the exact same model and colour. I'm a beginner and didn't know how to do these features on the headlights as I always leave it on auto. Thank you so much for this.
No problem glad I could help
Just take fuse box loose, move it back a couple inches. Much easier. Just di it this way tonight.
Sweet glad you found a better way, it never hurts to try a different approach
Unbelievable that you have to go through all this just to change a headlight...
@@JonezBBQ ya, no kidding
What a great video!
Thank you, I appreciate it
Thank you very much
Great video thanks
literally taking my hyundai 2020 up to the dealership today because i'm having problems with my " daytime running light " on the right side. got new lights & it's still not operating. the lady at a car store told me my light connector isn't connecting properly
Wow, tengo uno del 2019, así que me chave, ya tengo las luces así que a ver el vídeo nuevamente y aventurar que todo quede igual. 😲
I added those sylvania 1157 led's before watching this video and now I have those warning lights. I'm now in the process of buying the ones u did for the DTR lights. How are they doing so far? As well as your led 9005's?
I like them so far I do want to switch to the cool white though
Don’t understand but why they made it so difficult 😣… rather just from the top we can actually change it
The hurt in this guys voice at the end killed me :/
Lol
@@MCPHILL did you end up finding a good light to use?
@@naomi.kautzky I just ended up going with a good rated one on Amazon, then they went out of business and I sold the elantra lol🤷♂️
Seriously, should appreciate you for this heavy work, but should have watched @ralph longo s video, it would have made your workmuch easier
is there an easier way to do this? i’m not taking my whole headlight out i’m just not doing it
Some people with small hands can go through the wheel well
I have a 2019 sel and the highs wont work at all. I also want to upgrade to leds any suggestions?
Check all of the fueses, it's probably under the dash or could be a relay
And as far as led bulbs go I would just go on Amazon and sort by highest rated.
Thank you
Yep pain in the butt Thanks Hyundai
Your instructions were amazing my man 👍… you saved me some cash that’s for sure
This Stephen from BC Canada… Langley
Have cold for me 🍺
Because I’m having one in Your Honour !!!
Cheer 🍻
Thanks again to you and as for Hyundai….. up your nose with a rubber hose
What brand of headlight bulbs did you install?
Hi i have a question, do you know the clearance or the dimensions roughly on how big the heat sink can be? As i am worried if i buy my LED headlight and the heatsink might be too big? Thank you in advance! Thinking of getting the GTR LIGHTING Ultra 2 or the LASFIT LS Plus series but am concern of the clearance and i am worried it might not fit
I'm honestly not sure. There seems to be a decent amount of room. Worse case scenario, you can return them.
Or, you can just put Sylvania stock bulbs in with a twist of the wrist in 30 seconds including time to take the bulbs out of the package.
Thank you for your time and patience. This is complete BS by Hyundai😡😡😡😡😡
I just picked up a 2020 Thursday evening. Looking to do a LED upgrade as well. Did you get any error code for this swap? Crossing my fingers their wasn't any.
Yes make sure when you get led bulbs you get canbus leds, that way you won't get an error code.
@@MCPHILL awesome thank you again for your confirmation.
Did you get led installed?
Where did you get that the lights from?
They don't sell them anymore, I would just look on amazon and filter 4 stars and above
All that to change a light bulb?
What bulbs do you use for headlight & daylight
Daytime running light you have to use canbus LEDS, I use maxgtrs on Amazon and use any good rated led headlights
I was going to ask the same thing thank you
Do you know what’s the bulb type for the DRLs? And do you know if LED will work for the DRL without triggering an error
They are 1157 bulbs that use double filament. I actually ordered some LEDs for them so I will let you know. I'm pretty sure it will not show an error message but we will see lol
MCPHILL sounds good. So is it dual filament because it’s at full brightness when headlights are off and when headlights are turned on the DRLs dim?
I got myself a set of LEDs too I’m going to risk it I guess lol I got canbus ones tho so hopefully that helps
@@darrencalderon yep that's correct, I also have no idea why but they use a dual filament bulb for the turn signals in the front from the factory and only have a hot a neutral wire running to the base?!?!?
MCPHILL oh really that’s really odd lol you would think the turn single would only use a single filament maybe for ease of manufacturing they kept the dual filament bulbs for assembly haha
Dang dude I struggled hrs so that I didn't have to take off the entire friggin headlight housing and bumper
I can change a bulb in about 20 min doing it this way
Hey, my high beams haven't worked since I bought this car. Any suggestions? Thanks
Check the relay and fues, high beams on this model use an actuator at each headlight housing to move the projection lens up and down
I’m surprise you didn’t do the daytime running lights
I did in a separate video
@@MCPHILL my bad bro thank you though because I need to clean this car up the yellow makes it look like a cheap car
@@JesseayalaUP24 yes I completely agree
Is there anyway you can send me the link for the daytime running lights?
@@JesseayalaUP24 www.amazon.com/gp/product/B07L4K7Z44/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07L4KBR7H&linkCode=as2&tag=mcphill-20&linkId=6b9939084ff8f8e86414575a93a50e0d&th=1
Where did you purchase the headlights ?
They no longer sell that brand. I swapped to Lasfit and they are even brighter
www.amazon.com/s?k=lasfit+led&ref=nb_sb_noss
@@MCPHILL appreciate it. Thank you.
@@ericklozano6640 no problem
What size is the bulb?
9005
Are the 9005 for high and low beams or just low beams?
9005 are hi/low
They're high beams but the projector allows them to be dual purpose. When you activate the high beams you'll hear an actuator move in the headlight assembly.
I have 9006 and 9005 in my older car.. Each have their role as separate bulbs
@@cidkramer I was looking for this answer everywhere!! I couldn't figure out how 9005 can be dual beam! Thanks Dave!!
Thanks for the vid. I did the difficult way like you and got it done. Think the most annoying part was getting the bumper back on.
I did it probably 5 different times and could get it done in about 25 min
This is insane. Pull the bumper shroud just to change a headlight bulb? What engineering moron thought that that was the way to go?
Volvo C30 headlights come out in under 60 seconds. You pull a pin, and the headlight slides out.
There's around 4-5 clips you can take off and if you push hard enough, you can "pop" the wheel well down and fit ur hand in there without having to fuss over taking the bumper out.
Good video though. Annoyed that I have to adjust my set more on the passenger's side 😒
I just wish they made it easier
Do I have to use the canbus leds for all the bulbs or just the drls?
You have to use them for your drl, turn signals and brake lights. Pretty much any light that flashes or changes brightness
I am absolutely pissed off about this! Changing an auto bulb should be as easy as changing any other bulb.
They have to make money somehow
jesus christ. I have a 2019 and the stock bulb just finally died for the first time so I have to replace it and decided to look it up before just trying to do it. I'll never understand why they can't just make bulb replacement accessible without all this bullshit. it should be a 2 second job, not a hour long process of taking your entire front end apart.
I think their plan was to try and make everyone take it to a dealer
What is that
tool called that you pried clips off with?
www.amazon.com/XLSFPY-Removal-Fastener-Interior-Remover/dp/B09R1BGP64/ref=mp_s_a_1_12?crid=EU56G44RU0X9&keywords=car+trim+clip+removal+tool&qid=1654621330&sprefix=car+trim+clip+%2Caps%2C1384&sr=8-12
Are you serious? Hyundai made it this difficult to change a lousy headlight bulb!!
Pretty much, some people with tiny hands can go through the wheel well
Any idea why my passenger light always is in high beam mode??? I hear a click from the drivers side and it goes from low to high just fine but my passenger side stays on high always! My car is a 2019 elantra sel and i bought hikari Led lights from amazon. Im getting peopel flashing me casue my light is always on high beam
The wires on the bottom of the bulb are backwards, if you are still having issues let me know
What type of LED recommend for the front please let me know whit no error code please!!!
www.amazon.com/gp/aw/d/B07L4KBR7H?psc=1&ref=ppx_pop_mob_b_asin_title&th=1
MCPHILL and for the projectors? What’s your es recommendation?
What a nightmare. One more reason I miss my Toyota
I got my hand through those little tiny cracks and crevices I didn't get the cuts Engineers at Hyundai suck..it's the bring it bac design...$$$$$$$$
Does your car not have the led dtr strips around the headlight?
No, this trim doesn't have that option
@@MCPHILL probably why I’m having problems locating bulbs. Mine is the 2019 Elantra preferred but seems like there are 2 different headlight types for that trim. Very confusing I wish mine was simple like your trim.
@@BrandoPhil are you in the US?
@@MCPHILL Canada
@Brando Phil that's why the US version is a SEL, and they were different
At 11:46, did you place the bulb in around the 8 o’clock ? On yours did the led have to be placed at 3 & 9? Just didn’t seem there was enough turn to get at 3 & 9. On your year and mine the headlight assembly looks the same. 20- and my 22. You can’t see the bulb orientation from the outside I think.
To be honest whenever it latched in I kept it that way because at that time I was unaware of rotating the bulb for proper beam adjustment
@@MCPHILL Fair enough. You might not even have the Elantra anymore which would make you less interested. Thanks for responding!
@@micway71 ya I don't have it anymore, I'm always happy to help
@@MCPHILL that you did! What are you sporting these days? Hell I trade cars every 2-3 years.
@@micway71 I have a 17 santa fe sport, that is burning oil at 50k miles 😑
I wish I had watched this video before i bought my Elantra. This is ridiculous. Hyundai messed up.
i need help with the signal loght
فك الصدام الامامي
I’m sure it didn’t take all that
H4 or H7
9005
How do you adjust the headlights in the 19 elantra?
m.ua-cam.com/video/BjENirVymxo/v-deo.html
Thank you
@@joshuabrooks1661 no problem
Whats the dealership charge
Some forums were saying around $350
That's wild
Instead take wheel out than take our fender liner and that's it.
Hi.
Could you please sent me a link where you buy this bulb?
Thanks!!!
The bulb I am using is no longer available
@@MCPHILL
Thanks for the replay,
The size of bulb is 9005?
@@maksimgoman5003 yes it is
@@MCPHILL Thanks!!!
Seriously, does anyone know of a lawsuit concerning this?
There won't be any for a headlight bulb. All the new cars with LEDs aren't even replaceable. You have to buy the assembly
He must of had nothing to do that day,,he took the scenic route,,lol wheel well is the way to go.👍
Ever since I was little I have to tear everything apart to see how it works lol
Lucky guy,,blessed with the power of curiosity! Good for you 👍
عمل رائع استمر
This is ridiculous. All for a bulb change? This should be illegal.
This tutorial is WAY too complicated. All I did was unscrew the one screw and those two plastic cap thingies on the left tire he shows here. And I was able to reach my hand in, take off the cap, and take the light out (while attacked to the cable) swap the light, place it back, twist it in, and put the cap on and that’s it. Me right light I could open and take out with my hand there. Took me 15 minutes.
Hyundai didn’t do well just to fix a bulbs and this nonsense stress
Link for those LED please
www.amazon.com/Boslla-Headlight-Warning-Weather-Emergency/dp/B07MLFXYFF/ref=mp_s_a_1_4?dchild=1&keywords=boslla+9005&qid=1619047913&sr=8-4
Is the 2020 headlight bulb a dual beam or single?
Dual, it uses an actuator to adjust the bulb angle
@@MCPHILL actuator? Is there a special 9005 bulb or only one style?
@@jimduffenais3996 any style
@@MCPHILL thanks...i will pick some up soon. Cheers
Can you reccomend a set from amazon? $30-40 range?
I did it by squeezing my hand in nobody could and on my 2nd spure because my dad said anyone can fought
How to take off the transparent assembly of the lamp because the high is idle
I accomplished all this without taking the dsmn bumper off. Just saying
It sucks the lights are so lame in the first place, I have an Elantra work vehicle, liked the warranty and mileage so I bought a 2020 Santa Fe and the lights are bright .
This design is criminal.
All this for some simple bulb changeout.. smh
28 mins. isn't "real quick"
It is what it is 🤷♂️