Custom Laser Cut Cable Ties feat. Falcon 2 Pro
Вставка
- Опубліковано 1 жов 2024
- FREE DOWNLOAD PROJECT FILE 👉 shandstudio.com/
Sneak Peek NEW TECH 👉 / camshand.jpg
SUBSCRIBE 🔔 @camshand
▼ ▽ LINKS MENTIONED IN VIDEO
Creality Falcon 2 Pro Laser Cutter 👉 shrsl.com/4h1ez
8 Inch Hon & Guan Inline Duct Fan
Amazon: geni.us/8InchD...
Website: store.honguan....
10% off discount code for Website: camshand
Round Head Stud (7x5mm Silver) 👉 www.ebay.com.a...
✱ ✱ ✱
If you purchase from the links above, I may receive a small commission, this helps support the channel and costs you nothing extra.
▶ CONNECT WITH ME
WEBSITE: camshand.com/l...
SPONSORSHIPS: camshand.com/b...
appreciate you getting sent a free product and still being honest about it's problems and safety issues!
Cable management solution = buy laser cutter and make own cable ties 🫡
2000 $ or 5 for 10
My gut feeling is $2000 tbh😁@@milesmalivuk9827
I found your channel a few months ago through the desk build project and I have to say, it's quickly become of my favoritte to watch. I genuinely get excited when I see a thumbnail pop up on my feed, the glowing blue desk creates a really cool and recognisable visual identity. I love your genuine approach to projects and the story telling style you have. Looking forward to the next one!
How's embedding that stream deck going?
That's really nice to hear Simon, thank you!
It has been quite the process to visually tell these stories without cameras slowing down the actual making projects but with each video I feel my style more and more.
And yes, the blue desk being a lightbox for top downs has worked better than I could have imagined 🤩
Streamdeck panel is awaiting parts, bunch of custom knobs since I now have measurements.
and buttons on the way which are needed for the other parts going into the right panel.
Excited to put it all together to at least have a balanced visual whilst I turn my attention towards programming the centre dashboard.
Found your channel from your desk build videos and must say you’ve improved significantly over the past few months. Your videos are always such high quality, and genuinely enjoyable to watch. Love having another Aussie maker I can relate to.
P.S: love how Creality sent you their laser, and you didn’t feel pressured to not point out the flaws, no matter how big. Pure sponsored content is the best.
Appreciate the compliments Josh 😊
It's been such a joy to share my custom tech journey, stoked to have fellow Aussies join me!
Yes, regardless of being sent products for review or not, safety is a top priority!
Other than that I always try to think what I would want to know as a customer as at the end of the day I buy these types of products myself.
P.s. The mini server build I teased that's next looks soooo damn cool
Sick! Can’t wait
cool project :)
I have so many Ideas that are super similar to yours! This channel is a huge inspiration to actually build/film them once I have the funds to do so.
My issue is I’ve worked on manyy custom projects but always pinched for time and don’t film anything.
Totally understand the time struggles and trying to get thing done!
My trick, is I've switched to a "one and done" principle where possible.
Also, If a big project requires the need to learn something, I'll see if I can break that skill down into a project of its own. Almost like a mini project to more easily stay on track with and chip away.
Finally, the biggest motto I've embraced is "it's a prototype", anything you make just tell yourself it's a prototype, until eventually you get what you're happy with. That helps with time constraints as I'll let go of perfectionism enough that I surprisingly get more done at a 98% quality level that is better than getting stuck and giving up.
Still figuring it out everyday, but these things have helped me a lot to keep momentum
@@camshand the idea of not getting it right the first time, and everything is a prototype is slowly starting to set in for me. I’m Definitely a perfectionist, hopefully you will get to see an example someday 👀.
I have ADHD and constantly hop around the house on a day off and just work on whatever when my brain sees it. Trying to get into a compartmentalized flow, of watching UA-cam for an hour, working on a project for two hours, doing schoolwork for a while. Rather than trying to fatigue myself over trying to do so much in one day.
I have a-lot of filmed content. It’s just only from half of the project… I’ll forget halfway through and then give up on filming more.
Lets just say I’ve gotten good at only editing intros 😅 i try to see the project through and take glamor shots at the end to gather some practice in how to story-tell a project.
I appreciate your at length advice! It’s screenshotted and in a place I revisit to remember simple practices In content creation.
hi m8 just wondering if you've ever herd of the deej its a volume controller and mixer i think it would be a grate project for your desk
Oh that's a cool Arduino project! I did just buy the Streamdeck Plus to solve the issue of volume knobs but great to see there's a maker option out there
Hobbyist leatherworker here. The studs are usually called button studs, also known as Sam Browne studs, Sam Browne posts, or harness posts. Additionally, the compounds used in leather tanning, particularly in chrome tanned leather, are noxious, not just faux leather. The ventilation is super important if you're laser cutting leather.
Thanks for the names! You would not believe how hard it is to google for them without knowing the right terms. Found some on eBay as I couldn't find them in stores.
And yes I did do a burn test outside to make sure the smoke and flame was normal and ash was brown and not green (that's the test I saw mentioned on a few forums for vegetable vs chrome) and it was all brown so presumably vegetable tanned. 100% knowing whats safe and having ventilation even for wood is important!
Hi Cam,
This is Aaron from Yoolax Smart Home Shade company, hope all is going well.
I sent you an email last week, did you receive it? we hope to cooperate with you because of your excellent video content, i explained to your questions that you came up with before in the email, please check it when you are free.
Looking forward to your reply and discussing this further.
Aaron
Confused: He recommends xTool F1 as an alternative - isnt F1 a nonCNC engraver that is under 10W?
Ohhh I meant xTool S1! 😅
The portal themed music is a nice touch
Yeah I found a new artist on the licensing platform I use, all his stuff has that technology synth undertones like in portal. I was so excited 😆
We are Ottocast, an Carplay adapter manufacturer. How can we cooperate with you?
Hi?
Hello 👋
@@camshand why did you reply?.?.
Bro, i whould love to buy one of this, the trick part is that i live in brazil
Hmm I'm going to have to look into global shipping prices, might need to do an Australia batch, and then see how many need to be bundled to make it worthwhile with shipping costs 👍
thats sick bro nice work.
Thanks man! I'm really happy with them, especially the coloured ones 🤩
What mouse are you using? It looks hella cool mate!
Gravastar Mercury M1 Pro, looks wild cool! Will drop a short video on Instagram about it during the week but in short, it performs well for me, but did take a bit to get used to for grip as its shape isn't my normal preference. After a month though I'm used to it and really enjoy playing games with it.
Just FYI, that looks suspiciously like chrome tanned leather, not veg tan.
I did a burn test outside to check as the offcuts weren't Labelle.
It was brown ash, no green chemicals or melting 👍
cam shand can you marry me
Haha I have a Wife, my wedding ring just gets in the way of making things so I don't wear it.
@@camshand DIVORCE HER AND MARRY ME 😈
Damn that's a good haircut!
My man Jimmy the barber knows his way with the clippers 💈
First one here
Lightning fast! ⚡ What time was it where you are when the video went live?
quit toying with us, do that last panel in your desk!
It's coming before the end of the month, I'm super excited to finish it but I'm also not rushing the process. Takes a while to find the parts I want and also had to save money for the Streamdeck plus, so had some packages arrive this week which will allow me to get to work on it all
@@camshand I appreciate the reply/update. I know it is more difficult than just doing it. I am loving the project and can't get enough!
heyyy pokie
What do you mean by that………
Great work mate.
Thank you 👍