You sped through the most important part doing tons of disassembly at a screaming pace and then have the dumb music playing over when you are saying stuff people need to hear. This is exactly what I need but you spent half the time taking off the wheel and sped through the important part.. If you are going to post an instruction video, ditch the music and INSTRUCT
Could you re-upload this video without speeding it up. You have cut out way too much of the wheel change process doing that, We cannot see the order of the nuts and washers on the axel of the rear wheel. We cannot see why your pulling a motor apart and which motor your pulling apart, we cannot see what your doing with the motor very clearly, What grease did you use to greese inside the grooves of the motor? What type of tools did you use to take of the Chain Wheel, Too much of what your doing is off screen. All users are able to speed the video themselves on UA-cam with the video player speed change options, You should let users speed the video up themselves. This was a lazy motor change video attempt. Im half tempted to learn this process myself and make a better video myself to actually help people do the job properly.
I removed the motor to check and put some grease but can't cover the lid. It's like 5 milimiters above, can't close it properly. Don't know what I'm doing wrong. It should go normally in but it doesn't
Hey. I have both the pro and x. Are the motors both the same size? Was thinking of putting the pro motor into my x and keeping the 250w on it but using the pro motor. So could I just swap everything over but keep the x wheel??
Great video but can you please add more music? Like another soundtrack on top of this one so there’s two at once, cause you know, there wasn’t like enough of it
What is the torque on the Engine Pro and EP-2 Pro? On the manufacturer's website, both have 55 N.m. Elsewhere the EP-2 Pro is reported to have 80Nm and has a planetary gear and the Engine Pro only 55Nm and has no planetary gear but direct drive. So how is it right?
Thanks for asking, both engine are same in torque,gear and the speed are also same but the only difference is that ep-2 pro new one are charging the batteries same as a hybrid
Could you please do a short video with the nuts and bolts in what order they go on by, mine doesn’t seem to want to go together again And Ng we are about as much use as a chocolate teapot
Hey, how did you take the top part of the motor off with the casset? been trying to figure this out because only other way is to take off the sprocket :/ if want to keep it
Hello, when you opened the screw then hit the axel slowly from opposite direction from from the screw,and remember put some clothe or wood on the top of axel and then hit slowly
@@Aliraza_055no, I mean after I took the motor off of the wheel I saw that you guys did another step after that where you removed the top part of the motor with the casset. Only thing I could barely see in the video was you twisting it but I tried twisting and it did not seperate, 5:32
I noticed when pedalling from standstill I sometimes get a sound like tuck tuck tuck from rear hub, Both with display on or off. It disappears shortly after. Do you think it has something to do with clutch or gear internal. Seams after warm up the sound is gone and not always happening.
Thanks for asking,first of all if your bike is in warranty claim to the company.thay will send you new motor.that sound come from inside the motor.it has 3 sensors inside motor if one of them is broken it sounds like that
@@Aliraza_055 Thank you so much for your comment. So I will email them and explain the problem. Just have it less than 2 weeks. Greetings from Germany. 😊👍
@@arjunab6167 I JUST GOT MINE, AND I AM FROM AMERICA.. LOL.. SO I GOT MY BIKE DELIVERED AROUND CHRISTMAS TIME... RODE IT 2 TIMES, 2ND DAY, MY TIRE POPS AND I WALK ALL THE WAY HOME.. SOMY BIKE HAD BEEN IN A GARAGE FAR FAR AWAY AND REAR TIRE CAME WITH ME TO GET FIXED/REPLACED.. I GOT IT BACK, BUT... MY REAR TIRE WHEN I PEDAL, IT FIGHTS ME SO MUCH. I CANT EVEN RIDE IT... IT STARTED OFF ITS LIFE AMAZING IN MY EYES... NOW I JUST SEE BLURRINESS LOL THE TEARS :') 🥲
You sped through the most important part doing tons of disassembly at a screaming pace and then have the dumb music playing over when you are saying stuff people need to hear. This is exactly what I need but you spent half the time taking off the wheel and sped through the important part.. If you are going to post an instruction video, ditch the music and INSTRUCT
That music is shocking man. This could have been a good video if that music wasn't so bad. I'm not trolling, just being honest dude
Where do you get the motor
Interesting way to ride the bike at the end. What is the point of placing one's foot on the crossbar?
Is this more powerful than the engine pro comes with stock? I'd like to go to a more powerful motor.
I used both one but I suggest this engine pro because that engine also charge battery
@@Aliraza_055Where did you buy it???
Did you unscrew any screw under the rotor befre you remove it? Just behind the motor I saw you unscrew it something.
Hello ,the hub motor have screw only from out side
And whats the exact problem now
Could you re-upload this video without speeding it up. You have cut out way too much of the wheel change process doing that, We cannot see the order of the nuts and washers on the axel of the rear wheel. We cannot see why your pulling a motor apart and which motor your pulling apart, we cannot see what your doing with the motor very clearly, What grease did you use to greese inside the grooves of the motor? What type of tools did you use to take of the Chain Wheel, Too much of what your doing is off screen. All users are able to speed the video themselves on UA-cam with the video player speed change options, You should let users speed the video up themselves. This was a lazy motor change video attempt. Im half tempted to learn this process myself and make a better video myself to actually help people do the job properly.
Question. If the motor breaks, can you put another 750w motor, say Bafang, or does it have to be an original Engwe?
Answer.you can put every motor if it was hub motor and was 20/4 rim size
@@Aliraza_055Can you link Where you bought yours?
That music gave me anxiety wtf is even happening
I removed the motor to check and put some grease but can't cover the lid. It's like 5 milimiters above, can't close it properly. Don't know what I'm doing wrong. It should go normally in but it doesn't
Normaly its do not any grease inside ,i m puting grease only on seal for waterproofing,remove grease from cabels
This video would’ve been superb if you could’ve held the camera still
what kind of motor are you putting in?
Its pro 2 750w 14a motor
Change the ado a20f 36v 10amp need Changed to a 48v 15amp or more 🤔
Why not
Yeaaa my ado a20fat 500watt battery 48/20amper controller kt display lcdkt08s Speed max gps 53 kmh gps really top top top really
My ado next day motor 750watt battery 48/20amper Speed max gps 55/58 kmh really motor big fut Mag ali espres 160€ 750watt top top top
Yeaaaaaa my ado 48/20amper top top top spedd max 58 kmh
where can i buy this engine
Thanks for asking,you can buy on ebay and alot of online stores
@@Aliraza_055 search can't find anything
Hey. I have both the pro and x. Are the motors both the same size? Was thinking of putting the pro motor into my x and keeping the 250w on it but using the pro motor. So could I just swap everything over but keep the x wheel??
@@Gunner11763 yes the size are same but you have to swap controler and display also ,that is must
250w before? Now 750w? Or what?
Its 750w hub motor
My motor starts some sound like tak tak tak ,that’s why im changing it
@@Aliraza_055 before you change it was 250w?
@@Aliraza_055 it is engine x?
No its was 750w from before
Peor no se puede editar, paso de ver esta porquería que no se entiende nada con dos musicas a la vez.
DE LOCOS
Hate thats musics
this person will never say anything, you will see
Please, can you put the link of where to buy the engine. Thank you. Greetings.
Great video but can you please add more music? Like another soundtrack on top of this one so there’s two at once, cause you know, there wasn’t like enough of it
ty for vid
👍 thanks you sir .i will try my best
Hi dude ! What's the reference of the motor please ?
where did you buy the motor looking for a 1000 watt same bike
What is the torque on the Engine Pro and EP-2 Pro? On the manufacturer's website, both have 55 N.m. Elsewhere the EP-2 Pro is reported to have 80Nm and has a planetary gear and the Engine Pro only 55Nm and has no planetary gear but direct drive. So how is it right?
Thanks for asking, both engine are same in torque,gear and the speed are also same but the only difference is that ep-2 pro new one are charging the batteries same as a hybrid
Hi, how many km did you do with the old engine?
Hello, is it possible to change the gears on this bike? from 7 gears to like 9 or 12?
I think cogset is the name of the part I am reffering.
Thanks for asking ,the answers is no you can not change it because of its frame size,
Could you please do a short video with the nuts and bolts in what order they go on by, mine doesn’t seem to want to go together again And Ng we are about as much use as a chocolate teapot
Yes why not, but can you please explain what’s really you want and which bike you have?
Any idea would the engine pro motor fit into say the engine x wheel?? Asking for a friend ;)
And where one could buy the engine x version of the wheel or at least the part where the 250w is printed
Music ?..no information
Hey, how did you take the top part of the motor off with the casset? been trying to figure this out because only other way is to take off the sprocket :/ if want to keep it
Hello, when you opened the screw then hit the axel slowly from opposite direction from from the screw,and remember put some clothe or wood on the top of axel and then hit slowly
@@Aliraza_055no, I mean after I took the motor off of the wheel I saw that you guys did another step after that where you removed the top part of the motor with the casset. Only thing I could barely see in the video was you twisting it but I tried twisting and it did not seperate, 5:32
I noticed when pedalling from standstill I sometimes get a sound like tuck tuck tuck from rear hub,
Both with display on or off.
It disappears shortly after.
Do you think it has something to do with clutch or gear internal.
Seams after warm up the sound is gone and not always happening.
Thanks for asking,first of all if your bike is in warranty claim to the company.thay will send you new motor.that sound come from inside the motor.it has 3 sensors inside motor if one of them is broken it sounds like that
@@Aliraza_055
Thank you so much for your comment.
So I will email them and explain the problem.
Just have it less than 2 weeks.
Greetings from Germany. 😊👍
@@arjunab6167 I JUST GOT MINE, AND I AM FROM AMERICA.. LOL.. SO I GOT MY BIKE DELIVERED AROUND CHRISTMAS TIME...
RODE IT 2 TIMES, 2ND DAY, MY TIRE POPS AND I WALK ALL THE WAY HOME..
SOMY BIKE HAD BEEN IN A GARAGE FAR FAR AWAY AND REAR TIRE CAME WITH ME TO GET FIXED/REPLACED..
I GOT IT BACK, BUT... MY REAR TIRE WHEN I PEDAL, IT FIGHTS ME SO MUCH.
I CANT EVEN RIDE IT...
IT STARTED OFF ITS LIFE AMAZING IN MY EYES...
NOW I JUST SEE BLURRINESS
LOL
THE TEARS
:') 🥲
Since you have a EP 2 Pro, did you put a Engine Pro hub motor? Does it still recharge the battery?
I tried it that motor but you have to change all accessories not only moter
And its will help only when you go upside down a little bit
So you work in food delivery and how is the performance ?
Thanks for asking, overall this model is better from other models for food delivery
@@Aliraza_055 make some videos about this e-bike on the delivery work and how it performs I hope it is easier than changing motor😂
Dove hai acquistato il motore ?
Cosa è 250 W?
lo compro online.it 750w
Which bike is this?
Engwe ep pro 2
Where did you get that ?
You can get it from amazon but i buy it online in engwee website
@@Aliraza_055 The link does not work
Could you give us the address of the website where you bought this engine?
Regards
Yes 100%
WWW.Engwebike.com
If you buy on this website,you can get discount but it take time about 20 to 25 days to deliver
You want engine or bike?
@@Aliraza_055 I am interested in the engine.
After clicking on the website address, unfortunately nothing is displayed, have you checked this address?
E uguale motore della ado a 20+500watt e la la engwue EP2 pro sono uguali posso mettere stesso motore ?
What are these settings for a engwe c20 pro 15.10v 250 w