For the diy colors, I literally played with EVERY arrow, it made like a mint green, but it didn’t really get me anywhere. Anyway the fade7 and how you slow it down helped a lot. Thanks man.
@@issamaj2383 same thing happens to make. When i make my colour if i press the DIY button again to save it, it resets it back to white. If i change colour and i go back to the DIY, then it shows white again as if I didn't create a colour at all.. any help please?
The only way that I know how to reset the colors is to turn the color arrows up and down until it turns back white. I don’t think there is an easier way to do it, but I will research and update if there is.
ok thankyou! for me it doesn’t work if you keep the arrows pressed to change the diy colors. all i can do is just keep clicking the arrows instead of keeping them pressed. do you know how to fix that?
Hello. Did you try holding them down? Making sure you’re aiming for the sensor? Try going the other direction and using the other buttons and see if that does anything. Other than that, I apologize, but I’m not sure how to help
Unfortunately no, because the fade button will always include every single color. If you have 2 different sets, you can have one red and one green solid color. I no longer have the 2 different sets so I can only do one color at a time. It may be different for other light sets, but as for Daybetter, it is not possible.
I’m not sure why it isn’t working. The only advise I can give is to make sure you click the diy button, aim at the sensor, and hold or press arrows multiple times (down and up) it takes some getting used to, but they are all turned up or down by default. Try both directions on all arrows. Maybe try holding the arrow buttons down as well.
I’m not sure how else to explain it other than the way I did in the video. You press a diy button, which should start off white, then press the arrows to change the color.
I’m sorry to hear that. I unfortunately cannot say this solution will work for everyone. Please double check the connection.. cords, power source, remote, and the sensor. If all else fails, try and see if you can return them or get a new set.
@@issamaj2383I ended up trying it again after watching and turns out that I kept on pressed the button and I wasn’t noticing the slight color changes so I assumed that it was not working. Thanks for the tutorial
Also, it’s totally up to you, but would you mind taking the time to explore my channel? And maybe consider subbing? It’s totally free and it helps me out a lot!
@@issamaj2383 well, right now I don’t have a set thing cuz I feel like if I do the videos I want to do, it will come out terrible and I don’t feel like I have the time and equipment for it. Also rn I’m doing like small video that I like and funny videos, shorts and stuff but I wanna make sure that it’s good. So yeah, if I ever feel like u have an idea or if u have a thought for minor change in a video lmk
whenever i press any DIY colour its stuck on white even if i try press the arrows
U ever figure it out
Maybe try reseting ur remote check on UA-cam to check how to
Try reseting ur remotr
Mine too did you figure it out
Y’all prob got the black remote like me it doesn’t really work as good as the white one
do i have the right one? mine has arrows… with a sunshine on the bottom of it n its the color of the color ex: green arrows and green sun for green
Sounds like they’re a different type. Mine only has the sun at the top for overall brightness.
@@issamaj2383oh ok thank u!😊
For the diy colors, I literally played with EVERY arrow, it made like a mint green, but it didn’t really get me anywhere. Anyway the fade7 and how you slow it down helped a lot. Thanks man.
Thank you so much! I just got mine today and had no idea how to use the DIY function
You’re very welcome!
Man I'm so dumb... this whole time I've been trying to press the up buttons and been wondering why they didn't work lol
I did the same thing lol
Sameeee
i hold down diy and it wont reset for some reason and the arrows dont do anything
i bought the daybetter led strips in the video too
If i made the colour, then i doesn't save the colour
Have u figured out how to fix it😕?
how do u save them tho bcz when I press the button it just goes back to white
It should automatically save. When you make the color, click a different color, then go back to check if it saved
i have the same problem. it just won't save no matter how many times i do it :(
@@issamaj2383 same thing happens to make. When i make my colour if i press the DIY button again to save it, it resets it back to white. If i change colour and i go back to the DIY, then it shows white again as if I didn't create a colour at all.. any help please?
@@johnkoutoulakis8775 if it doesn’t automatically save, I’m not sure what to do. I apologize. I only know how to do it the way I showed in the video
@@issamaj2383 it's not your fault i suppose each brand have different controls. But i still can't find out how to save the diy colours
How. About the different daybetter controls
how do you reset the diy colors? by that i mean turn them off like idk if it works on daybetter
The only way that I know how to reset the colors is to turn the color arrows up and down until it turns back white. I don’t think there is an easier way to do it, but I will research and update if there is.
ok thankyou! for me it doesn’t work if you keep the arrows pressed to change the diy colors. all i can do is just keep clicking the arrows instead of keeping them pressed. do you know how to fix that?
helpp sowmbodyyy,when i press the down arrows it just stays on white
i swear my red and green arrows just dont work, ive pressed both of them for awhile and no change has happened :/// maybe my remote is just broken
Ummm my up and down buttons aren’t working
Hello. Did you try holding them down? Making sure you’re aiming for the sensor? Try going the other direction and using the other buttons and see if that does anything. Other than that, I apologize, but I’m not sure how to help
@@issamaj2383 ok
can you make red and green flash 5 seconds intervals for Christmas?
Unfortunately no, because the fade button will always include every single color. If you have 2 different sets, you can have one red and one green solid color. I no longer have the 2 different sets so I can only do one color at a time. It may be different for other light sets, but as for Daybetter, it is not possible.
@@issamaj2383 how bout red, green and white flash?...is that possible?...
Thank You Kindly...
for those that arrows dont work:press the DIY1 DIY2 AND DIY3 then try
my DIY arrows only go up 8 is there any way to make it go higher?
I believe there is a limit. It’s adding or decreasing a certain amount of R, B, and G. 0-100% there is no way to add more or less.
How do you save
If you’re able to make the color, it should automatically save
Mine collor don't save i did it like 20 times but they always stay on white
I’m sorry to hear that. I’m not the why the color wouldn’t save. It is supposed to do so automatically
I need to know if I can make them fade using diy colors
No unfortunately you can’t do that
Wait wait but how’d u delete the color?
I just turned everything back up and it should turn white again
How what uh if I press down arrow it’s still color
If it doesn’t work I’m not sure what to do but you have to click the arrows multiple times. Maybe try the up arrow?
same
It wont change colors when I press the arrows
I’m not sure why it isn’t working. The only advise I can give is to make sure you click the diy button, aim at the sensor, and hold or press arrows multiple times (down and up) it takes some getting used to, but they are all turned up or down by default. Try both directions on all arrows. Maybe try holding the arrow buttons down as well.
@@issamaj2383why is my white blue red and green and not white white?
Mine comes with a app to make custom colors
That’s so dope!
Thx so much
You’re welcome
my buttons are not working i’m confused
I’m not sure how else to explain it other than the way I did in the video. You press a diy button, which should start off white, then press the arrows to change the color.
thank you i was confused
You’re welcome. I’m glad I could help
Mine just stay white
I apologize. I’m not sure how else to explain it other than how I have in the video.
It ain’t workin for me
I’m sorry to hear that. I unfortunately cannot say this solution will work for everyone. Please double check the connection.. cords, power source, remote, and the sensor. If all else fails, try and see if you can return them or get a new set.
@@issamaj2383I ended up trying it again after watching and turns out that I kept on pressed the button and I wasn’t noticing the slight color changes so I assumed that it was not working. Thanks for the tutorial
mine stays white please help
You have to use the arrows as shown in the video. If that doesn’t work I’m not sure
This is the easiest thing to do
Thank you it is, but some people don’t even know what it is so I thought I’d make a tutorial🙂
Nonetheless keep up the good work my guy
Also, it’s totally up to you, but would you mind taking the time to explore my channel? And maybe consider subbing? It’s totally free and it helps me out a lot!
@@aaron_reynoso I checked it out, but what exactly is your channel about?
@@issamaj2383 well, right now I don’t have a set thing cuz I feel like if I do the videos I want to do, it will come out terrible and I don’t feel like I have the time and equipment for it. Also rn I’m doing like small video that I like and funny videos, shorts and stuff but I wanna make sure that it’s good. So yeah, if I ever feel like u have an idea or if u have a thought for minor change in a video lmk
None of these work help
I’m not sure how else to explain it other than the way I have in this video. I’m sorry
zestlights
The best kind
@@issamaj2383 yep