Dear Friend @jmbcrp1010, *Thank you very much* for your interest in our channel. *_Q_* - _puedes por favor recomendarme la camara USB que sugiere la jetson nano?_ ➡️ Jetson supports multiple camera interfaces including *USB, Ethernet, and MIPI CSI.* You can use according to your application. At its core, the Jetsons use the *_Linux kernel module Video Four Linux (version 2) (V4L2)_* ➡️ In case of USB Camera Series Jetson supports *_UVC(USB Video Class standard) - compliant board cameras._* The video from a USB camera takes a different route. In Linux, The USB Video Class driver (uvcvideo) is a Linux kernel module. The uvcvideo module supports extension unit controls (XU controls) to V4l2 through mapping and a driver-specific ioctl interface. Input/Output Controls (ioctls) are the interface to the V4L2 API. What this means is that a driver in a USB camera device can specify different device dependent controls, without uvcvideo or V4l2 having to specifically understand them. The USB camera driver hands a code for a feature, along with a range of possible values, to uvcvideo. When the user specifies a feature value for the camera, uvcvideo checks the bounds of the argument and passes it to the camera along with the feature code. The camera then adjusts itself accordingly. ➡️ You can also use USB Depth Cameras, High Speed Cameras with Jetson Boards. *_Check out following list from official NVIDIA website for Jetson Partner Supported Cameras_* 🔗 developer.nvidia.com/embedded/jetson-partner-supported-cameras?t-1_camera-interface=USB&t-1_supported-jetson-products=Orin For more details about camera interfacings you can check out excellent tutorials by Jim from JetsonHacks 🔗 jetsonhacks.com/2022/02/02/in-practice-usb-cameras-on-jetson/ 🔗 www.arducam.com/jetson-nano-xavier-nx-camera-solutions/ ➡️ ***For getting started with Jetson Nano, we suggest ***_Logitech C270_* USB camera which is readily available and easy to setup. If you have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards
Dear @ShubamTiwari, 🙏 *Thank you very much* for your interest in our channel and Your words of encouragement. It means lot to us. If you face any issues in replicating our projects, Feel free to contact us through email 📩 - *info@**make2explore.com* Also, For quick replies, you can always chat with us on 🚀 *_Telegram_* 🔗 t.me/make2explore We'd ❤️ love to help. Best Regards 🙏
Dear Derek @skylinegt6, *Thank you very much* for your interest in our channel. *_Q_* - _Is there a reason why a usb isn't used just like when imaging windows or Linux devices?_ ➡️ Are you referring to OS imaging/cloning? If so, the Jetson Nano uses SD Card as main storage component. (to store the operating system). It may be bit easier and faster to make image/ISO of SD card(High Speed UHS-I/II) instead of using USB transfer method. However if you prefer to go with the USB transfer method then you can use a software package like *_Clonezilla_*. We never tried this method, but if you have figured it out, please let us know the results. If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards
Dear Mohamed @mohamedmansour2013, *Thank you very much* for your interest in our channel. *_Q_* - _I have 5 volt 2.5 amp adapter is that ok for just setup ?_ ➡️ It is totally depends on which version of Jetson Nano you have. and What type of Carrier board you are using. Check out following link for more details - developer.nvidia.com/embedded/learn/jetson-nano-2gb-devkit-user-guide#id-.JetsonNano2GBDeveloperKitUserGuidevbatuu_v1.0-SCL ***Some versions of The Jetson Nano 2GB Developer Kits cannot be powered via the Micro-USB connector. If you are using old Jetson Nano(4GB/2GB) with *microUSB and 5V Power Jack (Like we used in video)* then Yes, you can try with 5 volt 2.5 amp adaptor for initial setup. If you are using USB Power then 5V⎓2 or 2.5A is recommended. But please note that if you connect any external peripherals like USB Mouse, Keyboard and WiFi adapter etc. They sometimes consumes/sink more power and Nano is unable to boot. Some power hungry computations(AI/ Machine Vision applications) requires more CPU/GPU power, Hence it is recommended to use at least (3-4A power for Jack) and 2.5-3A for micro USB(for old Boards). 📌Please check your Nano version then check your carrier board specifications and then choose correct power supply accordingly. ⚠️***Since Nano is very expensive dev board. Please be cautious. Do not plug-in any random power adaptors unless you confirm/sure about voltages and current ratings. Check your device specific user manuals and datasheets for more details⚠️ Hope this will help, beside If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards
after the setup it showed the home page and suddenly turned off now it’s not turning on When I turn on and off the led is glowing for 1 sec and turning off pls help me with this
Dear Mohammad Junaid @mohammadjunaid2941, *Thank you very much* for your interest in our channel. *_Q_* - _after the setup it showed the home page and suddenly turned off now it’s not turning on When I turn on and off the led is glowing for 1 sec and turning off pls help me with this..._ ➡️ This looks like OS/Jetpack related issue. (Black screen/Nano unable to boot/Screen Freezing/White Screen Issue). These are typical/usual issues with Jetson Nano - You can check on NVIDIA forum 🔗 forums.developer.nvidia.com/t/nvidia-jetson-nano-freezes-at-nvidia-logo-screen/236944 Solutions ==> -- If you are using *Jetson Nano 2GB/4GB* (old Hardware variant which reached EOL support) ➡️ Have you tried Nano with Jetpack 4.6.1 ? During our project development and As per our experimentation/testing, we found Jetpack 4.6.1 is the most stable release for Jetson Nano. You can try other versions also. Following is the Archives page. (4.6.1 to 4.6.6) 🔗 developer.nvidia.com/embedded/jetpack-archive Try multiple OS releases and find out best supported release for your Nano 2GB/4GB -- If you are using *Jetson Orin Nano Series* (New Hardware variant) ➡️ Then try Jetpack 6.0 onwards, (you can try latest one). 🔗 developer.nvidia.com/embedded/jetpack If the problem still persists then we suggest that you should carefully check your hardware configuration and setup, SD card/Power supply may be the issue. 📌Please check your Nano version then check your carrier board specifications and then choose correct power supply accordingly. ⚠️***Since Nano is very expensive dev board. Please be cautious. Do not plug-in any random power adaptors unless you confirm/sure about voltages and current ratings. Check your device specific user manuals and datasheets for more details⚠️ Hope this will help, beside If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards
After I do the first boot into my Jetson Nano 4GB. The autosetup GUI where you set the time, your new username, expand the drive does not start. All I get is the desktop. I already flashed the SD card 2 times. Why is the first boot setup not running after I log in? I logged in using username, pass: nvidia, nvidia
Dear @eduflyer , *Thank you very much* 🙏 for your interest in our channel. *_Q_* - _.. The autosetup GUI where you set the time, your new username, expand the drive does not start_ ➡️ Which version of Jetpack version you are trying to install? At the time of creating this tutorial we used Jetpack 4.6. If you are using latest version, then there might be change in starting GUI setup in latest OS release. Sometime Debian Linux/Ubuntu boots into live mode, which is also called "Try Ubuntu before you install it" mode. If your Jetson boots in such mode then don't worry, just log in with live image. and then You will get 'Install OS' option icon on somewhere on Desktop. Just double click that to start the installation, then you will be able to set options like time, preferred language etc. 🔗 ubuntu.com/tutorials/try-ubuntu-before-you-install#1-getting-started *_Q_* - _..logged in using username, pass: nvidia, nvidia_ ➡️ It means that, the OS you have flashed on SD card is pre-configured already. It may be just cloned image installed OS. If this version is running with no issues then use it. You don't need to worry about drive expansion or other configuration. If you still have any suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards 🙏
I hope you are doing well. I am currently facing a significant issue with my Nvidia Jetson Nano 2GB, which I recently acquired for a project. I followed the official guide for the initial configuration, but I am encountering a major problem when attempting to flash the image onto the SD card. Specifically, I used BalenaEtcher to flash the image onto the SD card. The flashing process itself seems to go smoothly, but during the validation process, the SD card gets divided into multiple partitions. Furthermore, numerous pop-up messages appear on the display, prompting me to format the disk. When I click on cancel, an error message pops up stating: "le volume ne contient pas de système de fichiers connu. Veuillez vérifier si tous les pilotes de système de fichiers nécessaires sont chargés et si le volume n'est pas endommagé." (Translation: "The volume does not contain a known file system. Please check if all necessary file system drivers are loaded and if the volume is not damaged.") I would like to highlight that I have tried formatting the SD card before flashing the image. I attempted formatting it once with FAT32 and then with Ext4, but the problem persisted. Additionally, when I connect my HDMI cable to the Jetson Nano, which I know is functional, nothing is displayed on the monitor. This occurs specifically after I insert the SD card into the Jetson Nano. I kindly request your assistance in resolving this issue. Your guidance and support would be greatly appreciated. Thank you in advance for your help.
Dear Mohamed Hedi Guefrach, *Thank you very much* 🙏 for your interest in our channel. *_Q_* - _---The volume does not contain a known file system. Please check if all necessary file system drivers are loaded and if the volume is not damaged_ ➡️ When you flash Jetson Nano OS onto SD card, multiple partitions get automatically created during OS installation, so "Multiple pop-ups" about different drives is common issue(which is not actually a problem. In windows machine these partitions get automounted(enumerated) in File manager. *Do not format any of these partition - even it is saying unsupported file system. Just close the pop-up whenever it get displayed* Since Jetpack OS is Ubuntu Based it will have partitions like (SWAP, FS, EXT4 etc) sometime Windows doesn't understand the FS format and gives these kind of errors. *_Q_* - _...I would like to highlight that I have tried formatting the SD card before flashing the image. I attempted formatting it once with FAT32 and then with Ext4, but the problem persisted_ ➡️ *SD card should be in its default formatting - FAT32* *_Q_* _...Additionally, when I connect my HDMI cable to the Jetson Nano, which I know is functional, nothing is displayed on the monitor. This occurs specifically after I insert the SD card into the Jetson Nano_ ➡️ Its a common issue with Jetson Nano 🔗 forums.developer.nvidia.com/t/nvidia-jetson-nano-freezes-at-nvidia-logo-screen/236944 Please use - *_high speed SD card_* + *_Proper Recommended Power supply(5Amps)_* and *_Compatible OS Version for your Jetson Nano Variant 4GB/2GB_* If you still have any issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards 🙏
Dear @elmahdiaouam7249, *Thank you very much* 🙏 for your interest in our channel. *_Q_* - _I have the same issue with my Nvidia jetson nano 4GB, i follow the same steps in the video but nothing appears in the screen_ ➡️ Its a typical/usual issue with Jetson Nano - (Screen Freezing/White Screen Issue). You can check on NVIDIA forum 🔗 forums.developer.nvidia.com/t/nvidia-jetson-nano-freezes-at-nvidia-logo-screen/236944 Standard workaround is as following - Please use - *_high speed SD card_* *_Good Quality HDMI Cable_* *_Proper Recommended Power supply(5V, 4Amps)_* and *_Compatible OS Version for your Jetson Nano Variant 4GB/2GB_* Insufficient Power supply(Current Rating) or incompatible OS are the typical causes for this problem. If you still have any issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards 🙏
@@make2explore thank you for your response, i found that i was using the sdk image for jetson Orin, now after using the right sdk image, my jetson nano boot very slow(takes 30min) , what could be the source of this problem? I have SanDisk 128GB UHS 1, as an SD card, and a 5V - 3A phone charger that power the jetson via micro USB.
Dear @elmahdiaouam7249, Use stable image - (4.6.1 best supported) Try using old stable release of OS, As Jetson Nano Kit is old Hardware, new OS's for ORIN or other board may not give good speed/support on Jetson Nano 🔗 developer.nvidia.com/embedded/learn/get-started-jetson-nano-devkit#write 🔗 developer.nvidia.com/embedded/jetpack-sdk-461 If you are running Nano With peripherals (Display+Keyboard+Mouse+WiFi Card etc) - Then use good power supply (5.1V, 3/4A). 🔗 forums.developer.nvidia.com/t/power-supply-considerations-for-jetson-nano-developer-kit/71637 If you still have any issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards 🙏
Dear Sam Ruben Abraham @samrubenabraham6979, *Thank you very much* for your interest in our channel. *_Q_* - _Excuse me, but using a Wifi dongle also suffice??_ ➡️ Yes!!, you're absolutely right. We can use compatible WiFi Dongle/adapter also. Something like - Edimax EW-7811Un (802.11n). **Since we have created this video content with (Waveshare Jetson Nano Metal Case (C) with dual Antenna provision and Jetbot kit), So we used existing interface and WiFi NIC cards came with the kit accessory. If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards
when i power up my jetson nano card it turns on but does not start and the ignition light on the card is red when it is supposed to be green i need help and explanation to solve this problem please
Dear @seraphinelesliefouda9117, *Thank you very much* for your interest in our channel. _Q : Jetson Nano Dev Board does not turn on_ ==> Please make sure that, ISO Image of Jetson OS is properly flashed. Then also check SD card is readable means it has (Read/Write) permission. Are you using official NVIDIA carrier board or custom made board? Please ping us on WhatsApp or Telegram on following links for more info. ✔️ 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭 If you face any issues in replicating our UA-cam DIY projects/Tutorials, Feel free to contact us through email 📩 𝐬𝐮𝐩𝐩𝐨𝐫𝐭@𝐦𝐚𝐤𝐞𝟐𝐞𝐱𝐩𝐥𝐨𝐫𝐞.𝐜𝐨𝐦 Also, For quick replies, you can chat with us on 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺/𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST As per time permits we will try our best to help you out. 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe Best Regards 🙏
Dear Subscriber, 🙏 Thank you so much for your interest in our channel. *_Q1. Do you need antenna? With nic?_* Yes this AC8265 Wireless NIC module requires 2 SMA antennas (2.4GHz / 5GHz) with IPEX connectors. But if you are looking for more affordable solution, then you can also use USB WiFi Adapter instead of AC8265. These USB WiFi Adapters (802.11ac), mostly used for desktop PC's which don't have Wi-Fi capabilities. You can easily use them with Jetson Nano running Ubuntu OS. But just make sure that, it comes with generic driver support. you can use following or something like it. *amzn.to/3hAyZ4B* *Q2. **_Can you access terminal of nano while connected to internet ?_* Yes you can access terminal of Nano while connected to internet with no issues. If you face any issues in replicating our projects, Feel free to contact us through email 📩 *info@**make2explore.com* Also, For quick replies, you can always chat with us on 🚀 *_Telegram_* Just Search *_@make2explore_* on *Telegram* 🚀 We'd ❤️ love to help. Best Regards 🙏
@@make2explore Can you tell me, why you did not chose the simplest path of using an ethernet cable to connect into a router port. Is there a problem with this simple method?
Dear @eigenfield8380, 🙏 *Thank you very much* for your interest in our channel. *_Q_* - _Can you tell me, why you did not chose the simplest path of using an ethernet cable to connect into a router port. Is there a problem with this simple method_ ➡️ Yes! You're absolutely right. If display/Screen (Monitor) is available, Then *_Ethernet connection method is simplest_* one. At the time of making this video Tutorial ( in Oct21), We'd Jetson Nano Dev Kit came with AC8265 Wireless NIC module, So that's why we've included its interfacing in video. Unfortunately, We missed to mention this ethernet config method in Display mode setup explanation. ➡️ Some of our Students had only Laptops, but they do not have their own Monitor Display screens. Hence we added Headless Mode Setup Explanation. Thank you for your valuable suggestion, We'll definitely try to cover this topic, whenever we make any other Setup video Tutorial on Jetson Nano. If you still facing any issues in replicating any of our DIY Project/tutorial, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards 🙏
Dear @dctans.3671, *Thank you very much* for your interest in our channel. *_Q_* - _Can I use sd card 512 GB?_ ➡️ Yes you can. Nano has UHS-I card reader with SDXC support. As per NVIDIA forums, it can support up to 2TB card with about 100MB/s read/write speed. High speed memory card is recommended. We haven't used more than 64GB card, but see no reason 512GB to fail. If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe 📩 info@make2explore.com / support@make2explore.com As per time permits we will try our best to help you out. Best Regards
Dear @veshal ram , 🙏 *Thank you very much* for your interest in our channel. I think you are referring to 4 USB ports of Jetson Nano? Right? If so, then you've to check it thoroughly again. Re-flash the SD card Jetson OS again. Connect Jetson Nano in Headless/Display mode (as instructed in video) and check those USB ports again. If problem still persist, then you need to contact your device vendor and try to get replacement for the hardware. Check the USB cables also, sometimes cables are also faulty. If you face any issues in replicating this project/tutorial, Feel free to contact us through email 📩 - *info@**make2explore.com* Also, For quick replies, you can always chat with us on 🚀 *_Telegram_* 🔗 t.me/make2explore We'd ❤️ love to help. Best Regards 🙏
Dear @Nik, 🙏 Thank you very much for your interest in our channel. You can refer following Article Guides to recover your password - 📌 Jetson Lost Password Recovery - 🔗 sofiya.io/blog/jetson-restore If you still facing any issues , Feel free to contact us through email 📩 - info@make2explore.com Also, For quick replies, you can always chat with us on 🚀 Telegram 🔗 t.me/make2explore We'd ❤️ love to help. Best Regards 🙏
Dear @Sami🙏 *Thank you very much* for your interest in our channel and Your words of encouragement. Those means lot to us. If you face any issues in replicating any our projects/tutorials, Feel free to contact us through email 📩 - *info@**make2explore.com* Also, For quick replies, you can always chat with us on 🚀 *_Telegram_* 🔗 t.me/make2explore We'd ❤️ love to help. Best Regards 🙏
Dear @dgb5820, *Thank you very much* for your interest in our channel. Yes, There is currently a global shortage of Jetson Nano Dev Kit. Unapproved resellers are capturing a decent slice of the single-board computer market for vast margins due to unavailability from official retailers. This same situation happened with Raspberry Pi recently. _Jetson Nano isn’t discontinued, however inventory has been low due to supply chain issues and component shortages with the devkit._ Hope NVIDIA will resolve this issue faster. There are few options to find a workaround for the Nano's current scarcity. Like, There are some decent resellers, selling Nvidia Jetson Nano Module SoC with their custom made Carrier boards. Ping us on email/Telegram/WhatsApp, we'll help you find nearest vendor at your location. ✔️ 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭 If you face any issues in replicating our UA-cam DIY projects/Tutorials, Feel free to contact us through email 📩 𝐬𝐮𝐩𝐩𝐨𝐫𝐭@𝐦𝐚𝐤𝐞𝟐𝐞𝐱𝐩𝐥𝐨𝐫𝐞.𝐜𝐨𝐦 Also, For quick replies, you can chat with us on 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺/𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽. Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST As per time permits we will try our best to help you out. 🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore 💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe Best Regards 🙏
![[Tutorial] Machine Learning Docker Container On Jetson Nano](http://i.ytimg.com/vi/LfMs0AN4ayA/mqdefault.jpg)
![[Tutorial] Machine Learning Docker Container On Jetson Nano](/img/tr.png)
puedes por favor recomendarme la camara USB que sugiere la jetson nano? (USB), gracias
Dear Friend @jmbcrp1010,
*Thank you very much* for your interest in our channel.
*_Q_* - _puedes por favor recomendarme la camara USB que sugiere la jetson nano?_
➡️ Jetson supports multiple camera interfaces including *USB, Ethernet, and MIPI CSI.* You can use according to your application. At its core, the Jetsons use the *_Linux kernel module Video Four Linux (version 2) (V4L2)_*
➡️ In case of USB Camera Series Jetson supports *_UVC(USB Video Class standard) - compliant board cameras._* The video from a USB camera takes a different route. In Linux, The USB Video Class driver (uvcvideo) is a Linux kernel module. The uvcvideo module supports extension unit controls (XU controls) to V4l2 through mapping and a driver-specific ioctl interface. Input/Output Controls (ioctls) are the interface to the V4L2 API. What this means is that a driver in a USB camera device can specify different device dependent controls, without uvcvideo or V4l2 having to specifically understand them. The USB camera driver hands a code for a feature, along with a range of possible values, to uvcvideo. When the user specifies a feature value for the camera, uvcvideo checks the bounds of the argument and passes it to the camera along with the feature code. The camera then adjusts itself accordingly.
➡️ You can also use USB Depth Cameras, High Speed Cameras with Jetson Boards. *_Check out following list from official NVIDIA website for Jetson Partner Supported Cameras_*
🔗 developer.nvidia.com/embedded/jetson-partner-supported-cameras?t-1_camera-interface=USB&t-1_supported-jetson-products=Orin
For more details about camera interfacings you can check out excellent tutorials by Jim from JetsonHacks
🔗 jetsonhacks.com/2022/02/02/in-practice-usb-cameras-on-jetson/
🔗 www.arducam.com/jetson-nano-xavier-nx-camera-solutions/
➡️ ***For getting started with Jetson Nano, we suggest ***_Logitech C270_* USB camera which is readily available and easy to setup.
If you have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards
You are doing great work Dude!!
Keep it up.
Dear @ShubamTiwari, 🙏 *Thank you very much* for your interest in our channel and Your words of encouragement. It means lot to us.
If you face any issues in replicating our projects, Feel free to contact us through email
📩 - *info@**make2explore.com*
Also, For quick replies, you can always chat with us on 🚀 *_Telegram_*
🔗 t.me/make2explore
We'd ❤️ love to help.
Best Regards 🙏
Is there a reason why a usb isn't used just like when imaging windows or Linux devices?
Dear Derek @skylinegt6,
*Thank you very much* for your interest in our channel.
*_Q_* - _Is there a reason why a usb isn't used just like when imaging windows or Linux devices?_
➡️ Are you referring to OS imaging/cloning? If so, the Jetson Nano uses SD Card as main storage component. (to store the operating system). It may be bit easier and faster to make image/ISO of SD card(High Speed UHS-I/II) instead of using USB transfer method. However if you prefer to go with the USB transfer method then you can use a software package like *_Clonezilla_*. We never tried this method, but if you have figured it out, please let us know the results.
If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards
I have 5 volt 2.5 amp adapter is that ok for just setup ?
Dear Mohamed @mohamedmansour2013,
*Thank you very much* for your interest in our channel.
*_Q_* - _I have 5 volt 2.5 amp adapter is that ok for just setup ?_
➡️ It is totally depends on which version of Jetson Nano you have. and What type of Carrier board you are using. Check out following link for more details -
developer.nvidia.com/embedded/learn/jetson-nano-2gb-devkit-user-guide#id-.JetsonNano2GBDeveloperKitUserGuidevbatuu_v1.0-SCL
***Some versions of The Jetson Nano 2GB Developer Kits cannot be powered via the Micro-USB connector.
If you are using old Jetson Nano(4GB/2GB) with *microUSB and 5V Power Jack (Like we used in video)* then Yes, you can try with 5 volt 2.5 amp adaptor for initial setup. If you are using USB Power then 5V⎓2 or 2.5A is recommended.
But please note that if you connect any external peripherals like USB Mouse, Keyboard and WiFi adapter etc. They sometimes consumes/sink more power and Nano is unable to boot. Some power hungry computations(AI/ Machine Vision applications) requires more CPU/GPU power, Hence it is recommended to use at least (3-4A power for Jack) and 2.5-3A for micro USB(for old Boards).
📌Please check your Nano version then check your carrier board specifications and then choose correct power supply accordingly.
⚠️***Since Nano is very expensive dev board. Please be cautious. Do not plug-in any random power adaptors unless you confirm/sure about voltages and current ratings. Check your device specific user manuals and datasheets for more details⚠️
Hope this will help, beside If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards
after the setup it showed the home page and suddenly turned off now it’s not turning on
When I turn on and off the led is glowing for 1 sec and turning off pls help me with this
Dear Mohammad Junaid @mohammadjunaid2941,
*Thank you very much* for your interest in our channel.
*_Q_* - _after the setup it showed the home page and suddenly turned off now it’s not turning on
When I turn on and off the led is glowing for 1 sec and turning off pls help me with this..._
➡️ This looks like OS/Jetpack related issue. (Black screen/Nano unable to boot/Screen Freezing/White Screen Issue). These are typical/usual issues with Jetson Nano - You can check on NVIDIA forum
🔗 forums.developer.nvidia.com/t/nvidia-jetson-nano-freezes-at-nvidia-logo-screen/236944
Solutions ==>
-- If you are using *Jetson Nano 2GB/4GB* (old Hardware variant which reached EOL support)
➡️ Have you tried Nano with Jetpack 4.6.1 ?
During our project development and As per our experimentation/testing, we found Jetpack 4.6.1 is the most stable release for Jetson Nano.
You can try other versions also. Following is the Archives page. (4.6.1 to 4.6.6)
🔗 developer.nvidia.com/embedded/jetpack-archive
Try multiple OS releases and find out best supported release for your Nano 2GB/4GB
-- If you are using *Jetson Orin Nano Series* (New Hardware variant)
➡️ Then try Jetpack 6.0 onwards, (you can try latest one).
🔗 developer.nvidia.com/embedded/jetpack
If the problem still persists then we suggest that you should carefully check your hardware configuration and setup, SD card/Power supply may be the issue.
📌Please check your Nano version then check your carrier board specifications and then choose correct power supply accordingly.
⚠️***Since Nano is very expensive dev board. Please be cautious. Do not plug-in any random power adaptors unless you confirm/sure about voltages and current ratings. Check your device specific user manuals and datasheets for more details⚠️
Hope this will help, beside If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards
After I do the first boot into my Jetson Nano 4GB. The autosetup GUI where you set the time, your new username, expand the drive does not start. All I get is the desktop. I already flashed the SD card 2 times. Why is the first boot setup not running after I log in? I logged in using username, pass: nvidia, nvidia
Dear @eduflyer ,
*Thank you very much* 🙏 for your interest in our channel.
*_Q_* - _.. The autosetup GUI where you set the time, your new username, expand the drive does not start_
➡️ Which version of Jetpack version you are trying to install?
At the time of creating this tutorial we used Jetpack 4.6. If you are using latest version, then there might be change in starting GUI setup in latest OS release.
Sometime Debian Linux/Ubuntu boots into live mode, which is also called "Try Ubuntu before you install it" mode.
If your Jetson boots in such mode then don't worry, just log in with live image. and then You will get 'Install OS' option icon on somewhere on Desktop. Just double click that to start the installation, then you will be able to set options like time, preferred language etc.
🔗 ubuntu.com/tutorials/try-ubuntu-before-you-install#1-getting-started
*_Q_* - _..logged in using username, pass: nvidia, nvidia_
➡️ It means that, the OS you have flashed on SD card is pre-configured already. It may be just cloned image installed OS. If this version is running with no issues then use it. You don't need to worry about drive expansion or other configuration.
If you still have any suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards 🙏
I hope you are doing well. I am currently facing a significant issue with my Nvidia Jetson Nano 2GB, which I recently acquired for a project. I followed the official guide for the initial configuration, but I am encountering a major problem when attempting to flash the image onto the SD card.
Specifically, I used BalenaEtcher to flash the image onto the SD card. The flashing process itself seems to go smoothly, but during the validation process, the SD card gets divided into multiple partitions. Furthermore, numerous pop-up messages appear on the display, prompting me to format the disk. When I click on cancel, an error message pops up stating: "le volume ne contient pas de système de fichiers connu. Veuillez vérifier si tous les pilotes de système de fichiers nécessaires sont chargés et si le volume n'est pas endommagé." (Translation: "The volume does not contain a known file system. Please check if all necessary file system drivers are loaded and if the volume is not damaged.")
I would like to highlight that I have tried formatting the SD card before flashing the image. I attempted formatting it once with FAT32 and then with Ext4, but the problem persisted.
Additionally, when I connect my HDMI cable to the Jetson Nano, which I know is functional, nothing is displayed on the monitor. This occurs specifically after I insert the SD card into the Jetson Nano.
I kindly request your assistance in resolving this issue. Your guidance and support would be greatly appreciated.
Thank you in advance for your help.
Dear Mohamed Hedi Guefrach,
*Thank you very much* 🙏 for your interest in our channel.
*_Q_* - _---The volume does not contain a known file system. Please check if all necessary file system drivers are loaded and if the volume is not damaged_
➡️ When you flash Jetson Nano OS onto SD card, multiple partitions get automatically created during OS installation, so "Multiple pop-ups" about different drives is common issue(which is not actually a problem. In windows machine these partitions get automounted(enumerated) in File manager.
*Do not format any of these partition - even it is saying unsupported file system. Just close the pop-up whenever it get displayed*
Since Jetpack OS is Ubuntu Based it will have partitions like (SWAP, FS, EXT4 etc) sometime Windows doesn't understand the FS format and gives these kind of errors.
*_Q_* - _...I would like to highlight that I have tried formatting the SD card before flashing the image. I attempted formatting it once with FAT32 and then with Ext4, but the problem persisted_
➡️ *SD card should be in its default formatting - FAT32*
*_Q_* _...Additionally, when I connect my HDMI cable to the Jetson Nano, which I know is functional, nothing is displayed on the monitor. This occurs specifically after I insert the SD card into the Jetson Nano_
➡️ Its a common issue with Jetson Nano
🔗 forums.developer.nvidia.com/t/nvidia-jetson-nano-freezes-at-nvidia-logo-screen/236944
Please use -
*_high speed SD card_* +
*_Proper Recommended Power supply(5Amps)_* and
*_Compatible OS Version for your Jetson Nano Variant 4GB/2GB_*
If you still have any issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards 🙏
I have the same issue with my Nvidia jetson nano 4GB, i follow the same steps in the video but nothing appears in the screen.
Dear @elmahdiaouam7249,
*Thank you very much* 🙏 for your interest in our channel.
*_Q_* - _I have the same issue with my Nvidia jetson nano 4GB, i follow the same steps in the video but nothing appears in the screen_
➡️ Its a typical/usual issue with Jetson Nano - (Screen Freezing/White Screen Issue). You can check on NVIDIA forum
🔗 forums.developer.nvidia.com/t/nvidia-jetson-nano-freezes-at-nvidia-logo-screen/236944
Standard workaround is as following -
Please use -
*_high speed SD card_*
*_Good Quality HDMI Cable_*
*_Proper Recommended Power supply(5V, 4Amps)_* and
*_Compatible OS Version for your Jetson Nano Variant 4GB/2GB_*
Insufficient Power supply(Current Rating) or incompatible OS are the typical causes for this problem.
If you still have any issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards 🙏
@@make2explore thank you for your response, i found that i was using the sdk image for jetson Orin, now after using the right sdk image, my jetson nano boot very slow(takes 30min) , what could be the source of this problem?
I have SanDisk 128GB UHS 1, as an SD card, and a 5V - 3A phone charger that power the jetson via micro USB.
Dear @elmahdiaouam7249,
Use stable image - (4.6.1 best supported)
Try using old stable release of OS, As Jetson Nano Kit is old Hardware, new OS's for ORIN or other board may not give good speed/support on Jetson Nano
🔗 developer.nvidia.com/embedded/learn/get-started-jetson-nano-devkit#write
🔗 developer.nvidia.com/embedded/jetpack-sdk-461
If you are running Nano With peripherals (Display+Keyboard+Mouse+WiFi Card etc) - Then use good power supply (5.1V, 3/4A).
🔗 forums.developer.nvidia.com/t/power-supply-considerations-for-jetson-nano-developer-kit/71637
If you still have any issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards 🙏
Excuse me, but using a Wifi dongle also suffice??
Dear Sam Ruben Abraham @samrubenabraham6979,
*Thank you very much* for your interest in our channel.
*_Q_* - _Excuse me, but using a Wifi dongle also suffice??_
➡️ Yes!!, you're absolutely right. We can use compatible WiFi Dongle/adapter also. Something like - Edimax EW-7811Un (802.11n).
**Since we have created this video content with (Waveshare Jetson Nano Metal Case (C) with dual Antenna provision and Jetbot kit), So we used existing interface and WiFi NIC cards came with the kit accessory.
If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards
when i power up my jetson nano card it turns on but does not start and the ignition light on the card is red when it is supposed to be green i need help and explanation to solve this problem please
Dear @seraphinelesliefouda9117, *Thank you very much* for your interest in our channel.
_Q : Jetson Nano Dev Board does not turn on_
==> Please make sure that, ISO Image of Jetson OS is properly flashed. Then also check SD card is readable means it has (Read/Write) permission.
Are you using official NVIDIA carrier board or custom made board?
Please ping us on WhatsApp or Telegram on following links for more info.
✔️ 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭
If you face any issues in replicating our UA-cam DIY projects/Tutorials, Feel free to contact us through email 📩 𝐬𝐮𝐩𝐩𝐨𝐫𝐭@𝐦𝐚𝐤𝐞𝟐𝐞𝐱𝐩𝐥𝐨𝐫𝐞.𝐜𝐨𝐦
Also, For quick replies, you can chat with us on 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺/𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
As per time permits we will try our best to help you out.
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
Best Regards 🙏
Do you need antenna? With nic?
Also can you access terminal of nano while connected to internet.
Dear Subscriber, 🙏 Thank you so much for your interest in our channel.
*_Q1. Do you need antenna? With nic?_*
Yes this AC8265 Wireless NIC module requires 2 SMA antennas (2.4GHz / 5GHz) with IPEX connectors.
But if you are looking for more affordable solution, then you can also use USB WiFi Adapter instead of AC8265. These USB WiFi Adapters (802.11ac), mostly used for desktop PC's which don't have Wi-Fi capabilities. You can easily use them with Jetson Nano running Ubuntu OS. But just make sure that, it comes with generic driver support. you can use following or something like it.
*amzn.to/3hAyZ4B*
*Q2. **_Can you access terminal of nano while connected to internet ?_*
Yes you can access terminal of Nano while connected to internet with no issues.
If you face any issues in replicating our projects, Feel free to contact us through email
📩 *info@**make2explore.com*
Also, For quick replies, you can always chat with us on 🚀 *_Telegram_* Just Search *_@make2explore_* on *Telegram* 🚀
We'd ❤️ love to help.
Best Regards 🙏
@@make2explore Can you tell me, why you did not chose the simplest path of using an ethernet cable to connect into a router port. Is there a problem with this simple method?
Dear @eigenfield8380, 🙏 *Thank you very much* for your interest in our channel.
*_Q_* - _Can you tell me, why you did not chose the simplest path of using an ethernet cable to connect into a router port. Is there a problem with this simple method_
➡️ Yes! You're absolutely right. If display/Screen (Monitor) is available, Then *_Ethernet connection method is simplest_* one. At the time of making this video Tutorial ( in Oct21), We'd Jetson Nano Dev Kit came with AC8265 Wireless NIC module, So that's why we've included its interfacing in video. Unfortunately, We missed to mention this ethernet config method in Display mode setup explanation.
➡️ Some of our Students had only Laptops, but they do not have their own Monitor Display screens. Hence we added Headless Mode Setup Explanation.
Thank you for your valuable suggestion, We'll definitely try to cover this topic, whenever we make any other Setup video Tutorial on Jetson Nano.
If you still facing any issues in replicating any of our DIY Project/tutorial, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards 🙏
Can I use sd card 512 GB?
Dear @dctans.3671,
*Thank you very much* for your interest in our channel.
*_Q_* - _Can I use sd card 512 GB?_
➡️ Yes you can. Nano has UHS-I card reader with SDXC support. As per NVIDIA forums, it can support up to 2TB card with about 100MB/s read/write speed.
High speed memory card is recommended.
We haven't used more than 64GB card, but see no reason 512GB to fail.
If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 info@make2explore.com / support@make2explore.com
As per time permits we will try our best to help you out.
Best Regards
Hi, all of my 4 USB ports aren't working, but HDMI is working well i can visualise it in monitor, kindly help me to sort out this problem
Dear @veshal ram , 🙏 *Thank you very much* for your interest in our channel.
I think you are referring to 4 USB ports of Jetson Nano? Right?
If so, then you've to check it thoroughly again. Re-flash the SD card Jetson OS again. Connect Jetson Nano in Headless/Display mode (as instructed in video) and check those USB ports again. If problem still persist, then you need to contact your device vendor and try to get replacement for the hardware.
Check the USB cables also, sometimes cables are also faulty.
If you face any issues in replicating this project/tutorial, Feel free to contact us through email
📩 - *info@**make2explore.com*
Also, For quick replies, you can always chat with us on 🚀 *_Telegram_*
🔗 t.me/make2explore
We'd ❤️ love to help.
Best Regards 🙏
@@make2explore thank you...
Hi i forgot the psw ?
Dear @Nik, 🙏 Thank you very much for your interest in our channel.
You can refer following Article Guides to recover your password -
📌 Jetson Lost Password Recovery - 🔗 sofiya.io/blog/jetson-restore
If you still facing any issues , Feel free to contact us through email
📩 - info@make2explore.com
Also, For quick replies, you can always chat with us on 🚀 Telegram
🔗 t.me/make2explore
We'd ❤️ love to help.
Best Regards 🙏
nice video
Dear @Sami🙏 *Thank you very much* for your interest in our channel and Your words of encouragement. Those means lot to us.
If you face any issues in replicating any our projects/tutorials, Feel free to contact us through email
📩 - *info@**make2explore.com*
Also, For quick replies, you can always chat with us on 🚀 *_Telegram_*
🔗 t.me/make2explore
We'd ❤️ love to help.
Best Regards 🙏
First lets start supplying the jetson to the bloody market place................
Dear @dgb5820, *Thank you very much* for your interest in our channel.
Yes, There is currently a global shortage of Jetson Nano Dev Kit. Unapproved resellers are capturing a decent slice of the single-board computer market for vast margins due to unavailability from official retailers. This same situation happened with Raspberry Pi recently. _Jetson Nano isn’t discontinued, however inventory has been low due to supply chain issues and component shortages with the devkit._ Hope NVIDIA will resolve this issue faster.
There are few options to find a workaround for the Nano's current scarcity.
Like, There are some decent resellers, selling Nvidia Jetson Nano Module SoC with their custom made Carrier boards. Ping us on email/Telegram/WhatsApp, we'll help you find nearest vendor at your location.
✔️ 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐒𝐮𝐩𝐩𝐨𝐫𝐭
If you face any issues in replicating our UA-cam DIY projects/Tutorials, Feel free to contact us through email 📩 𝐬𝐮𝐩𝐩𝐨𝐫𝐭@𝐦𝐚𝐤𝐞𝟐𝐞𝐱𝐩𝐥𝐨𝐫𝐞.𝐜𝐨𝐦
Also, For quick replies, you can chat with us on 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺/𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
As per time permits we will try our best to help you out.
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
Best Regards 🙏