Fixing my broken 996 (again) and Porsche 911 headlight restoration guide!
Вставка
- Опубліковано 28 жов 2024
- Get 10% off all Garage Therapy products by using the code '9WERKS10' at the checkout: www.garagether...
My Porsche 996 Carrera has broken down again! In this video we get to the bottom of the problem, plus I visit Garage Therapy to get the 911's cloudy headlights refurbed back to a factory finish!
WANT TO FINANCE YOUR NEXT PORSCHE?
Your dream Porsche might be closer than you think! The 9WERKS recommended finance experts is Rare Car Finance, your trusted partner for all Porsche sports cars valued over £25,000. For more information visit rarecarfinance.com.
GET YOUR MERCH!
911-inspired apparel can be found on my Teespring online store 'That Nine Eleven Merch', just click/tap on the options below each of my videos to browse the full selection exclusive to my shop.
GET MORE ON INSTAGRAM
Follow me @9werks_lee for more bespoke Porsche content and behind-the-scenes videos.
LISTEN TO MY PODCAST
9WERKS Radio is the Porsche podcast dedicated to the people and the stories behind the world's finest sports cars. Available on your preferred podcast platform! www.buzzsprout...
Don't forget to like and subscribe to my UA-cam channel www.youtube.co.... so you never miss a video from the most informative channel dedicated to Porsche's iconic 911.
#porsche911 #porsche996 #911carrera
Honestly, salvaging the oil filler tube is the prudent move. Mine was replaced and it was an incredible amount of work to get to the base of the tube. So much else to go wrong while removing intake systems and yes, the alternator. If also replacing these collateral parts gives peace of mind (I suppose it does), then yes hours vs minutes is worth it!
Stateside here... we use bug repellent to clean up the fogged headlights. Follow it up with some clear-coat.
Yep, eventually all 25 year rubber and plastic bits start to crumble. Wait til your AOS goes. FYI, get yourself a UAOS track version to replace it. With it comes the oil hose. You will never have to replace the AOS again. Just the diaphragm in 10 min. Not to mention that it will give you substantially more protection on the track helping to mitigate hydralock. Eventually you will need to replace your power steering lines as well. Just happened to me.
A good tip if to avoid damaging paint and having to mask…..the 996 headlights literally take 10seconds to remove with a quarter turn off the socket key from the factory tool kit 👍
Had mine replaced a few months ago. Definitely worth going for a new one, specially with the heat of South Florida.
Big fan of the green on little Irish. Thinking to do mine in the future on a 996 Targa.
1:40 best 996 ever. Love the green with black Porsche lettering and duck tail. Two thumbs way up.
It's a thing of beauty.
Great video _ Your 996 is looking splendid!
Thank you!
Another informative video Lee , that’s content is extremely handy to know as a 996 buyer , Awesome stuff fella 👌
Cheers Mark, I highly appreciate that good sir.
As I watched the entire video I must say Little Irish sure looks pretty awesome after your friend at Garage Therapy was all done with him!
I don't know if you've caught Matt Ross and his restoration of a Speed Yellow 996 Turbo but it has proved to be really good.
Nice
I suggest you try Mothers Mag & Aluminium Polish on the headlights next time ....
9:16 is the ceramic coating really the proper solution to keep UV away? Do you need to refresh it time by time or is this a one-and-done job (for the next 10 years until the headlights need refreshing?)?
I like this kind of content... and I love the little green irish, it is gorgeous! Like!
Ultimately a ceramic coating is not going to as effective as clearcoat which typically has UV peak resilience of 10 years. However modern ceramic coatings and more specifically professional grade coatings can do a very good job for several years or more. It will need to be refreshed in future however its life can be prolonged with other product during maintenance washes or quarterly protection refreshes.
Wow Lee! Your black electrical tape around the oil filler neck tube looks just like mine! Two continents and over 6K miles away and yet our little 996's have the same DNA...how about that. When I looked into how much work and reaching wayyyy back behind the engine it took to replace the entire filler tube I decided to just use my DIY backyard skills and use the black tape. Problem solved. But there is starting to be some oily build-up from leak-by back where the filler tube meets the engine so eventually it will get a proper fix. But not today. 😉
Good work Scott! It is indeed a medium-term fix, glad you got it sorted from home.
I had a question that I would appreciate your thoughts on, I have foggy Xenon projector lamps. I notice that a lot of Xenon projector lamps get a film build up on them over several years, noticeably reducing the light output. The only option seems to be to change the entire headlamp or split it and re seal it, which is less than ideal. This got me thinking, what if a gas or liquid based cleaning solution could be sprayed into the unit via the bulb opening that could clean and dissolve the film without damaging the electrics! That is a big ask I know but as you are a Chemist and a detailer I could not think of a better person to ask.
I think the only way to properly clean the interior of a lens assuming you can get access to spray something in there is dry ice cleaning. Ultimately with that method the dirt has to go somewhere so it would remain in the lense.
You would ideally want to spray something like an IPA that would evaporate. As to whether that would clean the area without agitation or wiping I wouldn't be so sure. Also you wouldn't want it to go on the electronics which probably wouldn't be the case at the edge of the light cluster.
I fear splitting the light cluster is the only way. Are you referring to a 996? It might be easier to buy another light cluster...
My question would be how can we make 26 hours in a day to provide the time to detail my 996 C4. I always have good intentions but rarely does it make it to the top of the list. I need to get my headlights done again this spring. Yours turned out great
We would recommend taking on certain parts of the car in sections every weekend. You'll soon find that you will get through it.
Headlights pop out easily on 997, not the same with a 996? Did my 997 (on the bench) with a diy kit and it was easy and went well IMO.
It makes huge difference doesn't it.
I was wondering the same thing. On a 996 there is a tool in the toolkit which means you can remove the headlights in less than a minute. Given risks to paintwork from polishing I am surprised they didn't remove the headlights first.
Hi David, time wasn't on our side on the day and having owned many porsches and correct many headlights (not just porsche) it was straight forward to correct them on the car. This allows us to apply a bit of pressure on the lens without it moving. If we were to wet sand then yes I would have removed the light.
Proud of myself. I called a cracked oil filler tube on the first crank and stop, and this hasn't even happened to me (yet).
It presented as a massive vacuum leak straight away and that's the most likely part to fail.
Good work sir! I need you on speed dial!
I LOVE this car! Please don't ever sell it.
Thankfully I love it just as much. What a car.
Horrible job alternator off throttle body off but you need to do it
This video (plus others) validates my decision to avoid 996 ownership. For a similar price, a myriad of MX5 and 86 cars that offer equal thrills without any of the unreliability. Not the same heritage for sure but it all comes down to the drive.
I've had x3 MX5s and x3 996s and have to say comparing them is like comparing a Happy Meal at McDonald's to an afternoon at Rick Steins.
You obviously haven't driven a 986 or 996 then. Without a doubt the best steering car ever. The feedback is outstanding and a joy to drive. I used to think they where over priced sporty cars. Until I got a 986 now I also have a 996 c4s.
While the cars you mention give driving Thrills, they are different Thrills to those from a 911. I've owned too many cars, most with performance credentials and all formats, FWD, AWD, RWD, and am on my 2nd 911. After I sold my first one, a perfect 996.2 C2 manual, to purchase an Aston, I immediately missed the 911 driving experience. Now remedied after selling my 20V ur quattro for crazy money, I have a 997.1 C2 manual. Yes yes, it's another M96 engine. Great engine as long as it doesn't break, and sounds SO much better than the DFI engine in the 997.2. As long as I can drive, there'll be a 911 in my garage, even if I'm down to just one car!
(Also have Z4M Coupe, Aston Martin Rapide S, and JDM ITR DC2).
Why not just remove the headlight unit, only takes a minute. No masking. I do mine every year.
And then how do you hold the light still while you're working all over it with a DA?!
@@9WERKSTVI secured mine to a work bench with duct tape.
If we were to start wet sanding we would of removed the headlights for sure. It's quite a straight forward procedure. We were time time limited so we decided it wasn't worth the effort and the hassle of securing the light to apply some good pressure with the DA.
I was just making a point how easy the unit is to remove. If you use a DI and compound, it gets everywhere.
@@stewartclough4866 a point well made. You shouldn't get product sling with the right technique and pad priming.
Those headlights are good for another 25 years...
with that coating more like 2-3 if you drive it on weekends. once you get the factory uv coating off everything is a temporary remedy.
put a Toyota engine in it
Vacuum leak. Just went through this with my 99