It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
You have extra long screws to hold the switch to the plate. There's no room for the thickness of twist ties with the shorty screws on what I have. If you're watching the video it's obvious the plastic piece has to go in first and he had to take it apart to put it in. After multiple attempts using various methods, it was a thin wire that worked for holding things together and still being able to remove it. I also drilled a hole and wired the back end of the pressure plate. That's the critical part that always wants to pop out when you're trying to put it together. What a PITA I finally got it working like new. The problem was the gasket leaking air and now it doesn't.
Great video! Thanks os sharing. I have a very similar ressue switch that I need to put back together and this video should really help. One question though. There was a small plastic piece sitting next to the switch cover at 02:40, but not sure where did it go. I did not see you putting that piece in the assembly.
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
Thank you for always sharing videos that give the audience a new perspective and true image of you and the place you want to convey. I am sure, you already have a loyal audience, including me, who love the authenticity of each video. Keep moving forward and work hard every day, I will always watch full videos with ads to support you
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
Thank you, I spent a lot of time trying to get this contraption together. Nearly drove myself nuts. Your technique solved the mystery for me. After taking this thing apart and ordering a new switch I realized it was just a simple reset button on the motor. I put it all back together following your technique and all works great. As one of your viewers noted the black plastic piece goes in Pryor to the spring attachment. Plastic ties and vise grips were the secret 👍 Have a backup pressure switch and thorough knowledge of what to do now. 🤬🤬🤬now🥰🥰🥰 Thanks again.
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
Tamslab watching my dear friend nice Gling mag assemble great sharing
I like how you cut the film and then put the plastic piece in that you forgot to put in in the beginning lil shady I didn't watch anymore🤨👎
😅😅😅
Did you catch him with his pants down?
I came here for this same comment. 🤷🏼♂️
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
so, where does the black plastic piece go that seemed to disappear around 3:40...
I think that should have been the first thing to go in!!!
Amen slight of hand but no help smh
I came here to say the same thing. 😳
@@jamesdaul8540It slides in vertically and part of it stick out the top of the housing (reset button). Only goes in one way.
Thanks for sharing your expertise. Great jo👍
L350 you are so very skilled hand ,sir. Good job❤
I could not get this switch back together without this video. Thank you for posting this!
I took mine apart and damn it went everywhere… couldn’t figure it out.. maybe this video will help.
Great knowledge
Amazing video Have a Good time
You have extra long screws to hold the switch to the plate. There's no room for the thickness of twist ties with the shorty screws on what I have. If you're watching the video it's obvious the plastic piece has to go in first and he had to take it apart to put it in. After multiple attempts using various methods, it was a thin wire that worked for holding things together and still being able to remove it. I also drilled a hole and wired the back end of the pressure plate. That's the critical part that always wants to pop out when you're trying to put it together. What a PITA I finally got it working like new. The problem was the gasket leaking air and now it doesn't.
Thank you for sharing po.
Galing naman idol.thanks for sharing.God bless
Thank you so much for this video , I would have been screwed without it.
Great video! Thanks os sharing. I have a very similar ressue switch that I need to put back together and this video should really help. One question though. There was a small plastic piece sitting next to the switch cover at 02:40, but not sure where did it go. I did not see you putting that piece in the assembly.
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
Thank you so very much. Much appreciated.
L431 idol. maraming salamat sa pagbahagi ng iyong kaalaman at kakayahan, kabisado mo talaga lods
Great vedios
Thanks for this video. I learned.
Lots of Thanks
🎉🎉🎉
I solved da problem 4m yo video.
Thanks 👍👍👍
Welcome 👍
WOW so nice... Good job.... Thank you for sharing...
Thanks for your help! If it would have flew apart slower, maybe I'd seen where everything went!
Wow nice sir
Thank you so much for this video. I am fixing up a Craftsman air compressor and it has a very similar switch. Using the Vise Grips was genius!!
galing mo lods
Thanks for sharing your ideas
BOM TRABALHO. DEUS TE ABENÇOE GRANDEMENTE
Thank you❤️❤️❤️ for sharing and try to fix also
Nice sharing host , really you're expert in this mechanical electronics
Nice lods galing....
Informative, great tutorial! Job well done, keep on sharing your knowledge , ha e a great time, enjoy!
Thank you for always sharing videos that give the audience a new perspective and true image of you and the place you want to convey.
I am sure, you already have a loyal audience, including me, who love the authenticity of each video.
Keep moving forward and work hard every day, I will always watch full videos with ads to support you
2:58 you have the black plastic peice with the odd shape l. Where did you put that..
thanks for sharibg lods
kailangan talaga marunong angg kabit ng ganyan buti nkita ko vedio mo maramong salamat
Watchiing kabayan..salamat sa pah share ng video
Great tutorial, thank you for the knowledge you shared..👍 full watched... Have a wonderful day my friend
Nice sharing lods watching full
Good morning thanks idol for sharing this video stay connected
Again watching your video friend.nice sharing.❤❤❤
Hello sir watching replay here . Thank you for sharing this tutorial video. Thank you for sharing and visiting my house. Stay connected. God bless.
Magandang pagbabagi ng iyong video 🎉magandang panoorin hanggang sa wakas at para itoy suporta din nilang kaibigan
Desejo muito sucesso pra você 🤝🙏
thanks for sharing kung paano mag assemble..
Good work assembled host ang galing
So smart to use plastic ties!
Ngayun may idea na ko lods. Salamat
Galing mo nman sir
Assembly air compressor pressure switch , good
Watching fullpack po
Salamat sa pagbahagi idol malaking tulong ito.. God bless mabuhay ka..
Galing lods thanks for sharing napaka husay ng pag kakagawa at napaka pulido ❤❤❤
رااااااائعة رااااااائعة بزاااف يا اخي عزيز دائما تواصل معك يا احلى واجمل قناة 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
This video is very helpul and informative good content bro
Great help po. Thank you for sharing.
Eto yung nakatulong sakin ngayon. Maraming salamat po
Good job
Thanks
nice
Ayos Lodi nice content keep vlogging po god bless
Intinya dari pemasangan ada pada tang jepit dan tali tis kalo gak pake itu auto susah si Per dan pelat nya mental
sir the small black plastic.where did you put it...
It goes iside,its the little button on top you push down, that's the part that had me stumped
He edited because he fucked up he had to do it all over again
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
Damn music
I am assembling the pressure switch but stumped with the black piece of plastic..you have it on the table and than it disappears
Not sure where it goes in the switch please help
Thanks but you didn't install the black plastic piece before you put zip ties on, did you forget and have to start over?
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
Brother cortaste el vídeo en el minuto 3:42 para mi es muy importante saber dónde y cómo va la pieza de plástico
nakalimutan mo po ang itim una ilagay
Thank you,
I spent a lot of time trying to get this contraption together.
Nearly drove myself nuts.
Your technique solved the mystery for me.
After taking this thing apart and ordering a new switch I realized it was just a simple reset button on the motor.
I put it all back together following your technique and all works great.
As one of your viewers noted the black plastic piece goes in Pryor to the spring attachment.
Plastic ties and vise grips were the secret 👍
Have a backup pressure switch and thorough knowledge of what to do now.
🤬🤬🤬now🥰🥰🥰
Thanks again.
Sir may nabibili Po bang automatic adjuster Yung plastic Po Yun en nabasag kc Po Yung plastic adjuster
Wala sir kuha ka na lng sa mga sirang unit o bile ka n lng ng bago
Yeah... that's something I hope to never do again. Many new curse words were invented.
There is a little black part with 2 little sticks, u dont show up where go!!
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
@@jerryayers7337thank you
tanggal ka ulit kasi yung itim na nilalagay sa loob di mo inlagay
Where did put that black plastic???
Where did the black plastic piece go it just disappeared
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
where did the plastic peace go. most important part of the assemble
It slides in vertically and part of it sticks out the top of the housing (reset button). Only goes in one way. And yes, it's the first thing that should go in.
You forgot reset
your still hiding u forgot to insert the plastic switch , such a crap assembling
Neumíš to