Thanks for this tutorial. What is the final spatial resolution of the precipitation map? Is it 30 m x 30 m? Because the original data has a resolution of 0.5° which is around 55 km x 55 km. Thank you in advance!
Sir thank you very much for this helpful tutorial. I just wondering about 2:46. How did you prepare such a file at the first step? I mean shapefile of your study area
after exporting shapefile, when I am exporting raster data, and choosing the Data frame (current) . that time, the error is coming that failed to copy raster. even when the extent is Raster Dataset (original) then it is doing the further steps
it depends on which year you are selecting if you got data from 2000 to 2010 total bands will be 120 or so in which set of 12 bands from band 1 represents each year in ascending order like the first 12 bands in 2000 and then the next 12 bands from 2001 like that... so depending on which year u want to divide them and select accordingly
I need to extract the monthly values for each year into a table, where the 12 values (months) would be in each row. Any idea how to do this? Thank you and good job!
@@GISRSSolution Thank you for replying. Yes, that would be an option. However, for my purpose, I would have only punctual data, needing some kind of interpolation after. So what I need is to extract the values referring to each band (time) from each cell, and organize it in a table where every 12 bands from each year are placed in a row, and this should be arranged for each cell coordinates. To be more clearer, my purpose is to create forecast models pertaining to data I have from the past.
Dear sir can you tell me how we can extract data from netcdf file. I have used netcdf to table command but i want to extract data of many coardinates by using netcdf table command.
when we convert the NC file to a raster layer we take time as band dimension which creates different bands as this is monthly data.....each month is represented as each band
When following your steps and on performing IDW i get this message ERROR 010067: Error in executing grid expression. Failed to execute (Idw).Please help
Asslam o alikum sir g. I am try to create rainfall layer by following this tutorial but I face issue as this band that u selects(at 6:04) is not shown to me..need help to resolve this issue so kindly plz .
Sir I have 2questions -1.Why raster data converting into point data? Can we use that raster data for mapping? Why should use IDW or kriging? Why we can't use the raster data for rainfall zonation ? 2.
Thanks Alot Sir I complete my final year thesis ❤❤❤ lots of love from pakistan
All credit goes to you sir ❤️
Beauty of organising graphic rainfall data of annual - average using its graphic capability on a fairly small scale! 😊
Great job. You covered many tools in only few minutes. Good refresher.
Brother, which version of Arc-GIS do you use?
hii there.. i tried to open 1901-2021 dataset... but it shows failed to open makenetcdf raster layer.. what can i do
Thanks for this tutorial. What is the final spatial resolution of the precipitation map? Is it 30 m x 30 m? Because the original data has a resolution of 0.5° which is around 55 km x 55 km. Thank you in advance!
Sir thank you very much for this helpful tutorial. I just wondering about 2:46. How did you prepare such a file at the first step? I mean shapefile of your study area
Very useful tutorial bro keep more. All the best
Bravo Good Job, thank you for your tremendouse efforts
Where did u get rainfall folder? 3:20
Sir if someone want to download rainfall data of 30 years and want to prepare rainfall map , how they will do it.
after exporting shapefile, when I am exporting raster data, and choosing the Data frame (current) . that time, the error is coming that failed to copy raster. even when the extent is Raster Dataset (original) then it is doing the further steps
Sir Please make a video about mean monthly temperature map of any region.
Sir, while importing the data in ArcGIS Pro CDF file is coming only in gray colored rasters.
same, but i dont think is problematic
The map generation will depend on data availability? whether global data is available? If available what is the lag period?
Brother, could you please make video on downloading ocean current and wind data (netCDF) and make a map? Please I want to learn that.
Which type of band add at 5:58 not discuss before in video
Why use IDW instead of Krigging?
Hai, very good tutorial. i want to ask why you just select 12 last band only which is 109-120 band?
These bands refer to the 12 months needed to calculate the annual precipitation for 2020
@@joaorafaelsilvasoares6608 Sir if i develop for 1901-2020 then how many bands i need to add?
I tried the multi dimension tool (NetCDF raster layer) instead of giving me a color gradient mine is gray
bro i could not open raster file even... i got failed to open makenetcdf raster file... what can i do
@@varma3887 still haven't gotten a solution to mine too,try upgrading to arcgis pro it might help
@@ameenabdulbarr8342 ok thankyou bro
@@ameenabdulbarr8342 i got also data displayed in gray colour
@@varma3887 I'm still looking for references concerning the gray colour it keeps on uploading
Sir for 2021-2022 which bands we should select?
Thank you for this helpful Tutorial
can you help me ,,,i m facing problem
In case of IMD data we have netCDF for every year. How to get the annual average rainfall in that case. Each netCDF file contains daily rainfall.
Sir, In this video , you used last 12 bands for composite band . Do I use this last 12 bands in every time for composite band?
it depends on which year you are selecting if you got data from 2000 to 2010 total bands will be 120 or so in which set of 12 bands from band 1 represents each year in ascending order like the first 12 bands in 2000 and then the next 12 bands from 2001 like that... so depending on which year u want to divide them and select accordingly
Hello sir why did you select only certain bands. Mine is showing 1476 bands. What should I select
Hi, is this applicable to QGIS software?
How to do FLAASH atmospheric correction from mosaic image in ENVI????????
Please need your response
many thanks, i got many advantages
Hello Why did u use a 90 cell size for the IDW?
Can you please help me? I need carbon emissions data. (India) for a specific city.. How can I get it?
Sir getting error while doing IDW
Sir IDW is showing the error of 99999. Please help me. I'm almost there to get the data
Firat of all you are showing rainfall data from 2011 to 2020 but it doesn't show the actual result which is only data of 2020
what is the need to change the projection to utm, please explain
respected sir
Can you please teach me, How to create an Isochrone for catchment?.
can you please answer me i did every step correctly but why IDW creating issue. kindly reply plz.
Not only you I am also facing this matter if you adjust please kindly help
what kind of error? its work for me.
Hi sir, how does it works? Thanks
I need to extract the monthly values for each year into a table, where the 12 values (months) would be in each row. Any idea how to do this? Thank you and good job!
In this case, you have to collect rainfall data from the relevant organization (Metrological department) of your country.
@@GISRSSolution Thank you for replying. Yes, that would be an option. However, for my purpose, I would have only punctual data, needing some kind of interpolation after. So what I need is to extract the values referring to each band (time) from each cell, and organize it in a table where every 12 bands from each year are placed in a row, and this should be arranged for each cell coordinates. To be more clearer, my purpose is to create forecast models pertaining to data I have from the past.
Dear sir can you tell me how we can extract data from netcdf file. I have used netcdf to table command but i want to extract data of many coardinates by using netcdf table command.
Would you like to tell, from where you got these multiple bands?
when we convert the NC file to a raster layer we take time as band dimension which creates different bands as this is monthly data.....each month is represented as each band
I need to make an average annual rainfall map for 1991-2020. how should I do that? please reply.
how can i select bands
love from Pakistan
Thank you. Love from Bangladesh ❤️
Thank you. very useful
Hi Sir, Why only the last 12 bands?
i hvnt find the band salection .from where did you do this
When following your steps and on performing IDW i get this message ERROR 010067: Error in executing grid expression.
Failed to execute (Idw).Please help
how about the accuracy of these data?
Lol
Thanks for the tutorial bro
You are welcome.
Is this possible to do in QGIS? Thank you
Yes.
Nice one . Thank you
Asslam o alikum sir g.
I am try to create rainfall layer by following this tutorial but I face issue as this band that u selects(at 6:04) is not shown to me..need help to resolve this issue so kindly plz .
Sir I am stucked in IDW,No of point where it is given as 12,which is not working
Thank you so much!!!
my project IDW is hsow error why
Sir can you also show how to use the icesat-2 data
hi
i got an error message when trying to convert NetCDF raster layer. please what might be wrong
Same here
Where did u gat tht band
Where did you get the bands from??
exactly what i wanna ask
From add data you just double click on the layer and you will get all the bands. Thanks
@@Shahnawaz-kl5ue thanks for the help bro
onk darun
Where did you get the bands
Thanks for the tutorial, But the thing is why you set the cell size as 90? can you please explain
Yeah, got your point. You can set the cell size 30.
@@GISRSSolution Ok. thanks a lot
Please if anyone has a video on how to implement SEBAL or PySEBAL to calculate actual evapotranspiration ETa? can share with me.
Hiii please help me out how can i download rainfall for chennai district
Thank you sir🙏
thank you so much sir😍
Welcome ❤️
THANK YOU SO MUCH BROTHER.
WHILE PRACTICING THIS I COULD NOT ADD THE STUDY AREA FILE. IT DID NOT DISPLAY ANYTHING LIKE STUDY AREA
But it should have been. I think you should try again following the tutorial.
Good job bro
Thanks bro.
Sir why you choose northern hemisphere WGS 1984 UTM 44
due to location of study area
why after i make netCDF raster layer. the layer turn to grey over the region not follow the color of band?
Did you figure this out?
Even I am having same problem. Did you find why is the problem?
same problem
same probbbb
Can someone do it for my site coz my arcgis crashes 😢😢😢and I can’t finish
From where I take rainfall file?
Hi. How to add the temperature as a variable to the nc file.
In your work, precipitation appears directly in the variable part. But I don't see variable in raster temperature data.
Mine showed nodata for my location
Is it daily data or monthly
monthly. there are 12 bands. It also available in the description
what can we do to make average annual rainfall map
after doing the sum go to raster calculator and divide the raster file with 12 to get average rainfall
dont waste ur time on this , this is wrong, u need precipitation stations to get the exct numbers , this is truly a waste of time
The cell statistics is not going
Helpfull❤
Glad it helped
Thanks
data set for 0.25 resolution please
Very complex video, especially selecting bands...
why output cell size '90'?
btw thanks for your tutorial
Can you translate into Arabic, can you help me?
ياريت لو تضيف ترجمه للعربي للافادة 😢
Thr data is not correct
Sir I have 2questions -1.Why raster data converting into point data? Can we use that raster data for mapping?
Why should use IDW or kriging? Why we can't use the raster data for rainfall zonation ?
2.
metrics