Це відео не доступне.
Перепрошуємо.
Electrolytic Metal Etching setup and marking demonstration
Вставка
- Опубліковано 19 сер 2024
- A short demonstration from www.trendmarkin... on setting up and using the electrochemical metal marking system, used to permanently etch metal products with a contrasting black print similar to laser-marking.
A low-voltage current is applied through a stencil to mark into the surface of a metal product.
Different stencils are available depending on the type of information required, the demonstration shows only "permanent stencils", long-lasting a re-usable electrochemical marking stencils
The power supply in this case is the EU80 power unit. It has adjustable settings to create the best mark on a variety of metals and compensate for the different stencil designs/compositions.
Also available is the EU100, EU300 "Classic" and the EU500 "Classic". There is also a more advanced alternative to the "Classic" called the "Expert".
However, the EU80 is perfectly suited for small to medium marks in a manual setting.
The settings you use depends on the size of the mark, on the material you are marking and the electrolyte you are using. It does vary a bit, although for many materials the setting remains the same and only the technique varies. The etching system comes with detailed instructions and a guide on the correct settings to select in order to obtain an optimum mark. There is then a bit of fine-tuning to suit the individual application but that is mainly done by the operator at the time.
Yes, these units are quite good and we have supplied a number of models to various companies - to suit their particular application.
We suggest the best way is for you to visit our website and fill out an enquiry form so we can respond accordingly.
thank you for
A: introducing me to Electrolytic Metal Etching
and B: introducing me to the Miami Vice soundtrack! so good!
Well - that's easy enough. Just go to our website and send through an inquiry. We'll forward your request through to your local distributor who can get in contact and figure out what you need. Hey, glad you liked the video! Cheers!
Good question! There are a few different stencil types. The most popular are pre-made stencils which we make according to your design on a special material which lasts maybe 1000-3000 etches. To make stencils yourselves, we have a disposable material to print with a dot-matrix printer, but quality isn't the same as our high-res stencils. Then there is a handheld printer to make disposable stencils (mainly text/numbers). See trendmarking . com . au / metal-etching-stencils for extra info.
Yes. We have various electrolytes to suit a variety of materials.
I see this is an old video I stumbled across, but not that old. Excellent choice of music Crockett......😀
Ahhh finally a video with good music! (Jan Hammer - Crockett's Theme)
A few questions.
* Can the stencils be re-used?
* How deep is the stencil?
* If you leave the marking head on for longer...will it etch deeper?
@RDPproject
We have different grades of stencil. Some are re-useable only a few times but can be made by the customer, others are pre-made by us and will last up to 3000 etchings per stencil, other stencils are super-fine but thinner and last up to 1500 etchings
I assume you mean how deep it the etches mark? The end result depends on the electrolyte used, the power settings and the time - as well as the material. 5-6micron is normal for light surface etching, 50-60 micron is deep etching.
Nice
"como posso comprar um stencil personalizado"
> how can I buy a custom stencil
Well - that depends on where you are! The easiest thing to do is to contact us through our trendmarking website. We'll then put you in touch with a local representative! Easy!
How the hell does the etched wording come out inked black??
What will happen if you use this on a piece of metal, then apply another finish over the piece, such as hot caustic bluing? Will the etching still be clear & visible?
Awesome tune 🎶🎶👍 .. & the cleanest, nearest, most scientific & beautiful etching I’ve seen to date..now..where can I get me one of those marking head thingys please ? 🙏🏻😁
Why should we use the conductive paper or tape. What will happen if there is no conductive paper?
So how much does a setup like that cost?
Thanks for the reply mate.
this would be great for etching my ARs
Can I use this eching technology in pad printing machine 's Steel plate for logo making
Sir can you guide me which stencil is used acetate film laser cut design on it or something else film.
hi, why we rave to use a conductive net involving the felt ?
How mach the per liter price of stenless steel electrolite chemical
could you use a electoplating rectifier and can it ech gold plate
Hello Friend!
I would like to know what paper you use. As it is called? I live in Argentina and I do not know what name to look for here. Thank you...
There is a network of worldwide dealers. Please contact us at www.trendmarking.com.au/trend-australia-details.html and we will put you in touch with your closest dealer.
como comprar en colombia estoy muy interesado....hay un distribuidor para colombia????
hi .
i am impressed . very professional. kindly tel me how to make stencil and where to buy electrolyte and other material in Dubai ?
Why wouldn't you just cut your letters into a negative stencil using a digital vinyl cutter ($200 on ebay) and apply them with transfer tape like a car window sticker. Then just do your etch over the vinyl followed by removing the stencil when done. Paint, solvent to clean up???? Who has time for that?
Feel free to contact us via our website (see video description) with your requirements and we will assist you further with the manufacture and supply of a customised permanent stencil, able to be re-used thousands of times each.
Hello sir can i ask how to make that pattern / stencil?
please tell me about stencil paper
sir can you send me a sample of this marking electrolyte n what is the cost per litre.
goog job sir
like shopping in Colombia'm very interested .... there is a distributor for Colombia?
我想买一台这样的机器,是什么型号啊?叫什么名字?
como posso comprar um stencil personalizado
Does this work on Copper too?
hello friend. You have a machine that makes the print screen for this machine? Thank you.
I from US, can buy from you :( ...but I saw online at US they sell the blue stencils ...
If you dnt mind, can you let me know, how to print/add logo/message onto blue stencils ... before I can do like video clip ... Please. Thanks frist
I want the machine.urgent
machine's cost and code nummber
Hi..! What's the output in amps?
Actual output is dependent on the stencil used, etching solution employed and type of material. This particular machine is the EU80 which is 80VA max.
will it etch on gold or rhodium plating?
cau use on steel and carbide? And do u have dealer in Thailand?
Yes, it can be used on steel and carbide. There is a network of worldwide dealers. Please contact us at www.trendmarking.com.au/trend-australia-details.html and we will put you in touch with your closest dealer.
can we etch on brass metal
How can i avail your product?can you ship overseas?
What material has the extension been made from?
The handle of the etching marking head is acrylic and the contact part is carbon.
what kind of paper that be used .?
where can I buy it??
There are a few different papers (stencils) that can be used, from stencils for a dot-matrix printer or typewriter, to stencils for a label printer, to long-life stencils that last thousands of high-quality etchings. For information and pricing please send us a message from the contact form at: www.trendmarking.com.au/trend-australia-details.html and we will put you in touch with the closest representative to your country.
wow
SR hame camikal chahiye to kese milega
US distributor/dealer?
what kind of paper we print design on :)
And pepar design how
Stencil design is done using pre-made stencils or stencils printed yourself using a handheld stencil printer.
12v POWER SUPPLY
How mach mission cost sir plz replay
For price contact www.trendmarking.com.au/trend-australia-details.html. We will forward your inquiry so that your closest distributor can give you a price in your local currency and provide local support and advice.
what name of chemical used in this video?
It is called "electrolyte" There are various formulations depending on the type of material being marked. Many are quite mild and do not require neutralisation on the material being marked. If you want to be put in touch with the local agent, send us an email via our website at www.trendmarking.com.au and we'll point you in the right direction.
what chemical i need,if i want to etch on steel vessels?
Electrolyte #72 or Electrolyte #6744 give an excellent quality mark on stainless steel.
How to make screen ?
If you have our machine, then send your artwork and we will supply the screen in Australia. For information and pricing please send us a message from the contact form at: www.trendmarking.com.au/trend-australia-details.html and we will put you in touch with the closest representative
how can I get the Materials.?
To obtain pricing, or be contacted about your nearest distributor, send us an inquiry via www.trendmarking.com.au/trend-australia-details.html and we will get in touch with some information.
Where can I obtain a custom permenant stencil
how to I get pattern
Please send us a message from the contact form at: www.trendmarking.com.au/trend-australia-details.html and we will put you in touch with the manufacturer of the machines who can find nearest representative to help you.
Price?
For price contact www.trendmarking.com.au/trend-australia-details.html. A distributor in your country can then contact you and give you a price in your local currency.
what s the song?
Jonathan Jonathan miami vice theme by jan hammer
thanks
don johnson.. miami vice... flamingos...
Riflescopes
helloooo