100% working IF you follow carefully step by step, especially when you have to load in fastboot mode, once it's open, don't touch anything until allow debugging appears
@@a2gsm ummmm now after two Time restarts the device say the FRP unlocker can't connect to remote host with i think my wi-fi ip adress i don't know the drivers doesn't install my pc i tryed in my father laptop it successfully complete now after 1 Time restarts after the error notice then need allow usb debug but in device doesn't show the question i don't know what's going on 🤷
Run the setup from direct zip file and disable Windows defender. If usb debugging not show reset your device again and make sure you have on first screen.
Reset you phone again and put the phone on 1st blue screen and power off. Then fastboot and open tool and wait for usb debugging. Install adb fastboot drivers first.
i put the phone on the bootloader, it was recognized by the pc, but the app does not proceed. i tried restarting the phone while connected with the usb, i took it off and put it back in, entered the bootloader just like in the video, but the app does not recognize it. the pc already showed the device is connected, but the app won't recognize it
Maybe it not supported. Run the software direct from zip file. Reset your phone and stay on first screen then power off. Connect fastboot . Then try frp remove. I hope it work
I'm honored by you response. Moto reflash full resets were done. The exact line error. nc: can't connect to remote host (192.168.137.2) What is that error,? Otherwise the function does want work.
Smart TIP, tried today.Only This one New phone gives the "can't connect IP" I have a box of these older phones, would pay 10usd each to clear FRP, simm lock etc . Moto Z2 force xt1789-01. They have shatter free screens make desireble, even though 2017 phones
this is not working I have installed the adb and fast boot drivers and it keeps saying "waiting for device...." when im in fastboot and start the program it just reboots the phone and i leave it there for like a half a hour it does nothing
Try to reset phone one time and try again. Disable windows defender or antivirus and still stuck try to run setup from zip directly and place in c drive
@@a2gsm I did… I put the phone in fast boot I load up the tool plug it in while fast boot is active and as it says waiting for device the phone restarts and it just powers back on to Hello There 🤦♂️
Install Motorola drivers and use good cable. Connect in Fastboot then open tool and wait for phone restart 3-4 times and then allow usb debugging and it will remove frp
What do I do if my phone stays on fastboot mode ? Nothing is typing up on PC it’s still says “Put Motorola device in fastboot/boot loader mode” I’ve tried pretty much everything there is & this was my last resort @ trying to bypass the FRP 😭
Thanks brother 100%working
Tried everything only this worked for me thanks. I like and subscribed
Thanks 😊
thanks boss,100 % Working android 7.
05/04/2024
Thanks ☺️
Bundle of Thanks😍
100% Recommended👍
Thank you 😊
My phone moto g4 android 7.1.1 100% done ✔
Thanks100%working
Thank you
Good 👍 job brother
Thanks
It works well on Moto g4 android 7.0 having to first install the motorola athenea adb drivers after 4 attempts the usb debugging message appears
Glad it work for you. Thank you for sharing method
You are a life saver 100% working
Thank you
100% working IF you follow carefully step by step, especially when you have to load in fastboot mode, once it's open, don't touch anything until allow debugging appears
Usb debugging mode enable few minutes late finally successfully removed Frp 😅😅
Good 👍
thank you very much. please when the block on bootlaod mode and ask for repearing what should I do please
Try software update using moto assistant tool
The FRP uclocker app cannot see my device the device in the fastboot/bootloader mode but the pc cannot see my device can you help me ?
First install motorola usb drivers and then connect to fastboot and try
Ok thanks i try it
@@a2gsm ummmm now after two Time restarts the device say the FRP unlocker can't connect to remote host with i think my wi-fi ip adress i don't know the drivers doesn't install my pc i tryed in my father laptop it successfully complete now after 1 Time restarts after the error notice then need allow usb debug but in device doesn't show the question i don't know what's going on 🤷
Run the setup from direct zip file and disable Windows defender. If usb debugging not show reset your device again and make sure you have on first screen.
@@a2gsm ok i'll try it later my father is on laptop
will this work with the XT series with the newest android version?
May be, you can try
Merci frère ❤🎉
Thanks ☺️
do you have any way solution for a moto g play? please help me
If fail retry tool without extracting
Thanks bro
Welcome
All mobile Google frp unlock hoga kiya
Nhi, only motorola phones with and 6,7,8 android version
Do u have a Moto FRP Bypass tool for Mac?
Not support any tool on mac for android unlocking
Does the FRP Software work for Motorola Phones Android 13
No its only support till android 8 or may be 9 . Older devices supported well on this tool
ITS WORK!!!
Thank you
Which app or software we need in pc?
For what purpose, explain
@@a2gsm sir I'm doing same like you but after rebot my mbile don't shows allowing option please guide me?
Reset you phone again and put the phone on 1st blue screen and power off. Then fastboot and open tool and wait for usb debugging. Install adb fastboot drivers first.
@@a2gsm ok Sir I'll do same and tell you it solved or not thanks❤️
@@a2gsm adb faastboost driver mbile me download krna h?
Or pc me konsa software install kru jo apka wala h yhi na?
Hi, i have moto 62 5g
It goes all the way to waiting for device and allow usb debug...
And then nothing. Phone turns on but still locked.
It only support till android 9
1000% working
Thanks
Not working on Moto X Force xt1580, latest 7.0, my drivers are up to date and the tool is stuck on "waiting for device and Allow USB debugging"
Reset your device and try again, make sure your device at first screen
i put the phone on the bootloader, it was recognized by the pc, but the app does not proceed.
i tried restarting the phone while connected with the usb, i took it off and put it back in, entered the bootloader just like in the video, but the app does not recognize it.
the pc already showed the device is connected, but the app won't recognize it
turns out a just needed to download the phone driver on the Motorola website, as soon as i opened the file and downloaded it, it worked
Glad you have solved yourself and understand the problem. Thank you for sharing experience.
Between "founds" I get a cant connect to remote host. USB debug never pops up. Drivers virus ports all explored. Moto Z2 force Android 9
Maybe it not supported. Run the software direct from zip file. Reset your phone and stay on first screen then power off. Connect fastboot . Then try frp remove. I hope it work
I'm honored by you response. Moto reflash full resets were done. The exact line error. nc: can't connect to remote host (192.168.137.2)
What is that error,? Otherwise the function does want work.
Try different internet connection or disable windows defender
Smart TIP, tried today.Only This one
New phone gives the "can't connect IP"
I have a box of these older phones, would pay 10usd each to clear FRP, simm lock etc .
Moto Z2 force xt1789-01. They have shatter free screens make desireble, even though 2017 phones
Will this erase everything on the device or just go through the password?
It remove frp lock which triggered after factory reset. If your phone already reset then this method work
It says bootloader or bootstart failed whenever I try it, I retried it so many times how do I fix this? moto e6 xt2005
May be it is not supported. Once check cpu type or find another tutorial on youtube for e6 specific model
biiiiiiieeeeeennnnnnnnn (//_-) eres la vena gracias
Does this network unlock it?
No, it is for frp Unlock. Factory reset protection
good 1000000000000% oky
Is it works moto e(xt1506) 2nd generation dual sim android version 5.1?
Please mention which driver should I use?
Yes it work and download moto driver from a2gsm.com/drivers
Bhai isme Motorola e13 par kaam kadega
No
You can watch bypass video on my channel. It’s easy and working on android 12 and 13 versions
this is not working I have installed the adb and fast boot drivers and it keeps saying "waiting for device...." when im in fastboot and start the program it just reboots the phone and i leave it there for like a half a hour it does nothing
What is you model and android version
@@a2gsm moto g42
@francoarriaga6930 no, these new models not supported in any tools
thanks
Do you have any other solution, for when it gets stuck in "Bypassing FRP"
Try to reset phone one time and try again. Disable windows defender or antivirus and still stuck try to run setup from zip directly and place in c drive
@@a2gsm i did it but it stuck in frp bypassing
@omensageiro9970 if adb enabled you can use any other tool for adb bypass frp option
@@a2gsm worked. Thank you!
Funcionado 19/01/2024 con un Moto Z Force Android 8
Thanks ☺️
Im trying on moto x4 but stuck on allow usb debug but on phone i cant allow
Reset your phone again and try . If same may be your device not supported
How can i open usa network
Fastboot not on😢 pls help
Which model are you trying to unlock. Search exact model on google search for fastboot method. Or check if your vol key is working or not
Can you help
me? I have a motorola e40
You can bypass it easily watch videos on motorola bypass on my channel
es compatible con moto G3 ???
Yes
Will I lose data?
If your phone on this condition, you already formated your data.
it freezes at bypassing FRP i wait like 30 mins and does´t work
Reset your phone and try again. If usb debugging enabled try any adb tool to remove frp
It never ask me to enable usb debugging on the phone, it got patched??
The same in my moto do you have any solution?
servirá para motorola g6 plus?
May be you can try
stuck on "waiting for device" i already have drivers (xt2155-6)
Not supported new models
@@a2gsm what other tools can i use instead?
For new models you can check first model no and which cpu your phone have. According to cpu some phones unlock free and some are paid tools.
That's bogus . If it was locked why is tour bluetooth on then.. nice rey
Lol its real. U are amateur
Logicel name please
please help mine is stuck on waiting for device
Install motorola usb drivwrs and connect phone in fastboot mode then open toola nd wait for process done 👍
So I tried on Moto g play it just takes the phone back to start screen
Watch carefully video and follow same steps. Your phone will restart 3-4 times
@@a2gsm I did… I put the phone in fast boot I load up the tool plug it in while fast boot is active and as it says waiting for device the phone restarts and it just powers back on to Hello There 🤦♂️
Install Motorola drivers and use good cable. Connect in Fastboot then open tool and wait for phone restart 3-4 times and then allow usb debugging and it will remove frp
stuck on Waiting for device and Allow USB Debug...
first install usb drivers and disable antivirus and then try gain. if same check android version is below 8 and one time reset your phone and retry
Adb server is out of date problem
Install adb drivers
Do not extract run directly and retry
I have Moto g play it’s not working?
It says cant connect to remote host 😔
Disable windows defender and then download fresh file and open without extrat and try again
nc: can't connect to remote host
Moto e32 csn work or not
May be not, but you can try or watch my moto frp bypass videos it will help you😃
@@a2gsm thanks tried but fail any idea
Mine doesn't show the USB debugging screen
Try to reset from recovery and then try frp bypass and set the screen to first option not on wifi screen
I have done hard reset 5 times but still can not get the debug option@@a2gsm
Android 13 working ????
No, till support android 9
It says waiting for device but nothing happens!
Install adb and fastboot drivers then try again
@@a2gsmtried downloading drivers but still doesn’t go beyond the first text
Motorola g5s and my laptop is a HP work laptop i3 4gb windows 10
@@a2gsmcan he do e5 play too please
Yes, may be it work. You can follow steps and bypass frp
16/11/2023 does NOT work on windows 10 lataest.
disable windows defender then try or run direct from zip file. first install motorola drivers for connectivity
link is dead : The file you are trying to download is no longer available
Will fix soon.
I have a Motorola G6 program just telling me bypassing FRP that all
Once factory reset and try again
The link, please boss
Check description
mine dosent work
May be your device not supported. It only work with old moto phones.
Hello, could you please send me the link?
Link in description
link?
Check description
Why my program dont start? Help pls
Disable antivirus and install moto drivers then try
@@a2gsmwhy allow debug didnt appear?
It only works on moto phones with android 6 to 9. New moto device not supported by this tool. Type your model name, i will try to help if possible
@@a2gsm moto x4(xt1900-1),Android 9
@@a2gsm i think the problem its on my laptop
Mega link is broken
Okay will fix soon
This is BS. Only works up to Android 9. The title says All Moto 2024. Which phone has Android 9 in 2024?
Sorry for wrong info, team will fix soon
no funciona en moto g6 play
What is android version
First reset your phone and install Motorola usb drivers then connect fastboot and try again
May be work.
Moto 3play not working
Works till android 8 or may be 9, but Higher android version not supported
Password pest nhi ho rha wha pe
Type iguru4life and enter
i doesnt work bro please hekp me
Mention your model no and what error you face
Mote e20
No it only works with old models with android 7,8,9
El link de descarga?
Link in description
how to download this Moto FRP Bypass Tool Free |
Link in description
nvm dosent work
file does not exist
Link fixed. You can download now
download link not working
Links updated, you can check now
Link ruim
I tried it 6 times it don't work on my moto g7
Only moto phones with android 6,7,8 or may be 9 is supported
Doesnt work stuck on bypassing frp
Do factory reset and retry, which model you are trying
What do I do if my phone stays on fastboot mode ? Nothing is typing up on PC it’s still says “Put Motorola device in fastboot/boot loader mode” I’ve tried pretty much everything there is & this was my last resort @ trying to bypass the FRP 😭
Install moto usb drivers first then comnect phone in fastboot mode and open the tool and waot for phone to restart 3-4 times and allow usb debugging
Mine stuck in waiting for device
Install drivers and then try once
Phone conect charger y phone restar ☹️
Try hard reset and check
This is bs don’t download