magandang araw po sa iyo bosing, nag papasalamat po ako sa suporta sa channel ko, makaka asa po kayo na lagi akong mag bibigay ng tip sa aking mga video para sa mga baguhan na mechanico, godbless you always🙏🙏🙏
Respected I'm building a generator for myself on a Perkins C4.4 engine I can't find information about tightening the head and other parts anywhere. to how many Nm it is tightened.
@@themountaineermechanictv bosing baka poide bigyan mo ako ng FIRE oRDiR.ng D8L sa D9 kabisado ko ngayon lang kasi ako naka oberhol ng D8L operator po ako piro za ngayo nag mekaneko ako
Thanks for sharing. What year model is this? May soon be working on a 1999 Hyster 80 Perkins fuel pump, & 2000 Hyster 100 Perkins starter. Do you have any video/s or link/s handy for those? Thanks again. Take care from TN.
Hello my friend I'm from Saudi Arabia can you send me please this engine all bolt torque How much nm Main bearing+begain bearing+head+ flywheel All bolt torque please
sir magandang araw po sa inyo, sir wala po kami ganyan kalaki na makina, maliliit lng po nagagawa namin dto perkins engine,maraming salamat din po sa inyo more power goodbless🙏🙏🙏
magandang araw sir jojo, ito po yng ginagawa ko pag nag torque ako ng head bolts ng 1104 perkins, step1-( 50 nm, 37 lb.ft) step2-(100 nm,74lb.ft) step 3 short bolt, +225 degrees long bolts, +270 degrees tapos sa gitna ng cylinder head ako ng uumpisa mag higpit paponta sa tigkabilng dulo ng cylinder head.. salamat sa coment nyo sir jojo, godblees🙏🙏🙏
Thank you from USA, New Hampshire.
Hello my friend you make video English also
boss new subs mo po ako godbless po idol patuloy mo lang ang explaination kasi dito kami nag subaybay sa mga vedio mo boss
magandang araw po sa iyo bosing, nag papasalamat po ako sa suporta sa channel ko, makaka asa po kayo na lagi akong mag bibigay ng tip sa aking mga video para sa mga baguhan na mechanico, godbless you always🙏🙏🙏
Hello brother good 👍 video
Salamat dagdag kaalaman na naman
Respected
I'm building a generator for myself on a Perkins C4.4 engine
I can't find information about tightening the head and other parts anywhere. to how many Nm it is tightened.
Slamat Sir mraming po ako ntutunan sa inyo...yung exc.cat320d2...my manual switch po ba yun sa power shifter nya...?
Is the key way a 3 o’clock correct?
thank you from Russia, my friend!
thank you friend for watching my video and thank you for visiting my channel. god bless you🙏🙏🙏
Can u add subtitles in English other language people also can understand....
Good video.. boss
Good pm po sir kung mag timing ka po Ng Perkins na 320d2 dapat po ba wlang play Ang #5 na cylinder salamat po sa sagot
Salamat bosing sa ngayon nag oberhol ako ng payloder
ok bosing ano pay loader boss
966 G bosing
@@themountaineermechanictv bosing baka poide bigyan mo ako ng FIRE oRDiR.ng D8L sa D9 kabisado ko ngayon lang kasi ako naka oberhol ng D8L operator po ako piro za ngayo nag mekaneko ako
1-8-4-3-6-5-7-2 yan boss piring order
@@themountaineermechanictv salamat bosing yong sa dalawang ikot lang po poide koba malaman
Thanks for sharing. What year model is this? May soon be working on a 1999 Hyster 80 Perkins fuel pump, & 2000 Hyster 100 Perkins starter.
Do you have any video/s or link/s handy for those? Thanks again. Take care from TN.
Hello my friend
I'm from Saudi Arabia can you send me please this engine all bolt torque
How much nm
Main bearing+begain bearing+head+ flywheel
All bolt torque please
Om mau tanya klo solar netes dari lubang kecil yg dua atas bawah itu kenapa ya, terima kasih
Do you use the same method for Dpa pump?
magandang hapon sir, ganyan din modelo ng makina ang problema mausok pagnaka low idle peru pagnka high idle walang usok ano b problema nyn?
magandang araw sayo bossing, ano kulay ng usok sir pag naka low idle, maputi ba o nag kukulay blue o maitim?
Hello bro good vidyo bro
thank you bro goodbless🙏🙏🙏
@@themountaineermechanictv bro cat320 Dl disal pum timing video pleja bro
yes sir that's for caterpillar 320dl injection pump timing
@@themountaineermechanictv yes bro
Ty very big
Boss valve clearance intake exhaust
bossing, sa saa6d107e-1 engine para komatsu excavator paano b ang tamang pagtanggal at pagkabit ng fuel high pressure pump?
Magandang araw bossing, common rail ba boss yan engine mo
@@themountaineermechanictv opo boss common rail
Sir Mayron po ba kayong P1250 4012 model perkins na may video kayo paano mag valve vlash procedure. maraming salamat po sa sagot nyo
sir magandang araw po sa inyo, sir wala po kami ganyan kalaki na makina, maliliit lng po nagagawa namin dto perkins engine,maraming salamat din po sa inyo more power goodbless🙏🙏🙏
Good morning sir saan po ang location ng shop nyo??
@@themountaineermechanictv saan po ba kayo bansa sir
Dto po ako sa saudi arabia sir
good working
Thanks brother godbless🙏🙏🙏
How cylinder timing in pump
👍👍👍
thank you sir
Nice
thanks your comment in my video and suport to my channel gdblesss🙏🙏🙏
ilan ba ang torque ng cylender head bolt boss pwedi ba sa 200ft-LB
bos pag ganyan klasi ng nakina, 37 to 74 FT-LB nilalagay ko
Sir panu po masigurado n low power Yung engine bulldozer komatso..?
Pag pinag tutulak mo ng lupa e nahihirapan ang makina tas namamatay, ano ba history nan boss bakit natanong mo kng papano malamn ang low power
@@themountaineermechanictvYung una injector pnlitan nla..
Wala parin ba nag bago nong pinalitan ang injictor
@@themountaineermechanictv gumana nmn pero ngayon low power dw ulit..
Ser pwdi po Ako mag patulong sayu
Pwidi sir, ano ba matutulong ko, pasinsya na ngayn ko lng nabasa coment mo
boss gawa ka explanation tungkol sa solenoid
ok sir sa sunod gagawa ako...
@@themountaineermechanictv salamat boss 🥳🥳🥳
Bossing ilan bang maximum torque nang cylinder head bolt ng 1104 Perkins at saka sequence?
magandang araw sir jojo, ito po yng ginagawa ko pag nag torque ako ng head bolts ng 1104 perkins, step1-( 50 nm, 37 lb.ft)
step2-(100 nm,74lb.ft)
step 3 short bolt, +225 degrees
long bolts, +270 degrees
tapos sa gitna ng cylinder head ako ng uumpisa mag higpit paponta sa tigkabilng dulo ng cylinder head.. salamat sa coment nyo sir jojo, godblees🙏🙏🙏
Salamat bossing.
ilang LB_FT sa head bolt boss
bosing 1rts step 37 LB.FT/2ND step 74 LB.FT
If any English speakers out there can make a video, it will be greatly appreciated
niceeeeeeeeeeeeeeeee
It for the years 1990
Good morning sir saan po ang location ng shop nyo??
magandang araw bossing, dto po shop namin sa aseer region, khamis mushayt
@@themountaineermechanictv may mabbilhan po kaya dto sa Pinas ng overhauling gasket set sir??
Straight 6 po na perkins 1100 series
Maraming salamat po at ingat po kau always
marami po sir sa manila
Speak lot too.
Cefic
Hello bro good vidyo bro
thank you brother for commenting on my video goodbless🙏🙏🙏