HOW TO BUILD A ROBOTIC LAWN MOWER GARAGE
Вставка
- Опубліковано 15 чер 2024
- Here are the links for everything seen right on Amazon
Luba 2 Robotic Mower: amzn.to/3Vn6Ilv (there are various models for property size
Rock Housing: amzn.to/3XrcHs2 (various sizes, but model 111 should fit most robotic mowers. This is what I have, check measurements before buying)
Sheet Rock saw with multi-blades: amzn.to/3xk5eAj
Metal Cutting Saw: amzn.to/3XlkebS
Rock Dementions for model in video 32"D x 34"W x 15"H
3 lbs
RUBBER MAT: www.amazon.com/dp/B0BW3RYPB6/...
This took me less than an hour and really came out and looks nice - Навчання та стиль
🤔hummm..you think this will work with the Yuka mammotion robo mower
I would put it on the charger and measure from ground to top of highest point and see if it’s within the height of the rock. It should fit
Ya Probably wouldn’t be great for Yuka unless you built in more height by adding a 2 x 4 on the base sideways with screws… I like this solution but I don’t like the price…
I do know Yuka docked on the charger is roughly 32” deep (front to back) and Yuka is 20.4” wide and 13” high..oops I guess Yuka is only one inch taller then Luba which is 12” tall…This might great if $169 is a good price. Luba is 27.2” Long and Yuka is only 25.5” long…
I ordered the bolder and I will let you guys know how it fits. Upon looking at Yuka's measurements it looks like it may fit, but a tight height fit.
@@dellki52 when you place it on the ground, you should be able to shave off up to the roof with a solar, but you can also elevate the front a little bit if it’s coming in short, maybe put a couple of flat rocks or something it’ll work out