Ultimate Axial Bomber - High Altitude Performance - Ep3
Вставка
- Опубліковано 15 жов 2024
- Transforming the Axial RR10 Bomber into the ultimate version of itself is going to be an in-depth conversion which will get into every single aspect of the vehicle. Episode three starts getting into the major transformation.
High Altitude Performance Facebook: bit.ly/2ScURXh
High Altitude Performance IG: bit.ly/2KCNhRE
Proline Prospec Shocks: bit.ly/2BcA7Jy
Proline Prospec Springs: bit.ly/3gDoeg3
Sway Bar Alternatives: bit.ly/2TVjaK7
#axialbomber #bomberfab #rr10
To Enter the SNU 100th Giveaway: bit.ly/SNUgive...
Follow My Social Media!
HarleyDesignsInc
Facebook.com/HarleyDesignsInc
My Camera/Production Gear:
Sony A6400 Camera: amzn.to/2K0ixt1
Sigma 16mm F1.4 Lens: amzn.to/2Y9TQj2
Audio-Technica AT875R Microphone: amzn.to/2YcVqR7
GoPro Vlogging Rig: • GoPro Hero 7 Vlogging ...
Zhiyun Crane V2: amzn.to/2Eo3Zjc
MacBook Pro 15in 512gb: amzn.to/2DGgBRQ
Samsung T5 500gb Hard Drive: amzn.to/2CxRcN4
DJI Mavic Drone: amzn.to/2EGw2un
My bomber is my favorite RC. 2 years and nothing broke, goes way better than my dingo. Been getting alot of use these last 6 weeks. I go social distance myself in the woods.
The rear piece alone has me sold on wanting to buy and build a bomber..... Yup I'm going for it
I’m rebuilding my old bomber right now. Kinda funny that this dropped at the same time. 👍🏽🐒🇺🇸
Take a page out of Ken blocks book and put one orange beadlock ring on the front driver tire
:)
I'm still on 100% entering streak!!! 😎 My Wraith NEEDS that system.
Josh, THIS is an exciting build!! 😁 Sure I can't do all of it, but the ideas are invaluable. I just wish they'd do a Bomber KIT.
*TOMORROW 100!!!* 👌👏👏👏👏👏😂🍺🍻🍺 Who's ready?
Carmine ✈🚂🚙
Yep, after watching the first video i pre-ordered my 2.0. Great series, especially since i wont get mine for a little bit, so getting to see what you're doing is giving me some ideas. As always great video!!!
A little piece of me died of shock when you chopped the chassis off so casually! Lol
What?!?! The man that hates flat chassis rails and loves steel rod fabrication is using a flat carbon piece on a tubular chassis 😁😁😁
Amazing! 😂😂 this comment wins.
Great video and definitely will be a better performer. To purchase a new kit and cut the rear out for a replacement seems Axial should have made a better kit to start with.
Hopefully when you're upgrades are complete we can see a performance comparison over yours and a stock bomber
The stock bomber is a lot of fun but there is always something I want to change. This is not going to be a typical build that most people will do.
The stock bomber is great out of the box, the High Altitude kit takes it to supercar level. For when the tuner, wants to tune the tune...
That rear section is nice looking, even if it's flat rail😁 Who doesn't love more suspension travel?
Any updates on this build, I'm in the process of building one myself and would love to hear what worked for you ,tuning wise
I love the stance of that truck.
As they say in Colorado......Dope!✌🏻
Great how to thanks for sharing. This model just looks tough. Especially post upgrade. You did a really good job of this video. Thanks again
Dude! Yer force'n me to go n spend a whole bunch ah money!
Great video. Soon as I saw that 2.0 on yer bench I new this was gonna get good.
Nice! Love the High Altitude rear cage. Great looking rig, can't wait to see how it progresses.
Hold my Dremel, watch this.... Getting into Matt territory now lol
That carbon back half is wicked :O
Nice piece, it’s sitting nice and low now.
Looks like I get my cage work after all lol
Great series Harley, had a spare bomber cage lying around and just ordered the high perf altitude bomber package 👌 let's see what comes out of it
Nice build really like that rear end part by High altitude, are you going to fit travel limiter straps to the rear, I have found so many different length on e-bay as looking to fit straps to the front of my UDR and SDT (LOSI SBR clone).
Nice upgrade!
Didn't know how much out of hand this would have gotten until I saw the carbon parts ✋🏼😅
low is good. mine is just under 8” to the roof at ride height. full droop 9” and full bump 7” it’s as stable as a lcg slash now lol.
Bomber? Capra? Bomber? Capra? Decisions decisions....
Do you think they will release the Bomber as a builder's kit? Basically removing 80% of the RTR kit doesn't make much financial sense to me.
I doubt it, since they discontinued it not too long ago.
Loving it!
I'm interested in seeing their 3d pritned axle, any link for me ? thanks ! great build !
here's their Shapeways store with everything: www.shapeways.com/shops/high-altitude-performance-rc - and I think the best axle for this is the Sentinel 900 CRH v2 from Shapeways
Late to the game here, did you use the same size shocks all the way around?
Yes I did. 4” shocks.
@@HarleyDesignsInc Thank you!
When can I buy this buggy in USA?
Looks awesome
If I'm going this route. Would it be better to buy the other bomber. Since it would be cheaper. This new one is what 500. Compared to the other one.
If you plan to strip it all down then yes, however it will eventually be gone and that won’t be an option.
@@HarleyDesignsInc true
Has anyone tried to order from this link? ( High Altitude Performance RC ) It takes you to a site that doesn't yet exist....says coming soon...am I mission something
Sick lookin sled Brother! ~;+}>
crap forgot to enter yesterday, there went my streak
Is there a front and rear shock part number you used? Or is it the same all around?
Same shocks all around.
Let's see some running video!
More carbon and alloy please!
Good video
NOICE!!
10:05 come on man. Scale vehicle rattles. Right.?.? :)
#HarleyDesigns do you know anyone that does or can you do a cms for this?
Not for a bomber, it’s just not a vehicle that would have a CMS in the 1:1 so I don’t think it’s really ever been developed.
Does number 2 spot win the bomber!? 1😃
🤘🏻
:)
Finally... First!
That’s a nice car, send one to my by free because I don’t have one to buy one please 😔
J. O. B.
You miss so many important things in the process you really should cover.