Since there has been no official reply. I want to share my experience. I am refilling 972 cartridges for Pagewide 477dw. It seems cartridges on these printers will only work one time... BUT if you keep an eye on your useage you CAN refill several times so long as you do it BEFORE it says empty (and do this when the power is off so it doesn't know you removed the cart. However after some time it will eventually warn you that the printer is not designed for continuous ink systems and you will be forced to replace the cartridge. This happened to me after 7500 pages apx. When I tried to leap frog, it warned me about the continuous ink system and wouldn't print. I will report again once I can try this with 2 regular cartridges rather than one regular and one starter. FYI I refilled using negative pressure in the first chamber only.
Edit. While I cannot leap frog, turns out you can refill the cartridge and reinsert it. It will warn you to only use the cartridge if you know it still has ink... and then another message about a previously inserted cartridge. But it still printed. Not sure how long this will last on this cartridge. On that note, I did refill the stater cartridge several times until it finally said not compatible with continuous ink systems. That cartridge I know for sure will not work as I have tried leap frogging it. Not sure if it is because it is starter or it has been flagged as continuous ink.
I ordered. I've tried this before with no success but have faith your system is working based on other reviews. I wrecked brand new printers trying to do this already but here we go again! QUESTION: other videos describe an internal bladder that needs to be collapsed via a syringe pulling air out, you make no mention of this. Other suppliers state that there is negative vacuum pressure in these from the factory and describe how to pull air out as you fill...Thoughts?
Will you guys do an update video for the 972A/X cartridges which are used by the new HP Pagewide printers? The cartridge looks really similar. Perhaps vacuum refill method with your qu-fill tool?
Why is this method different compared to your Hp 933xl video which is almost identical? No need to prime the cartridge and suck any remaining air out? It seems that is easier just to remove the plastic plugs, add the ink and replug again with the rubber ball instead of using ths special needles.
Thanks for the video, Very helpful except for the fact of what ink to use. In your video the ink looks the same as the ink for 950/951. I was told by one source that the 970/971 uses the same ink as the Canon PG-40/50 or PG-5 for the black and CLI41/51 or CLI-8. This doesn't seem right. Your ink codes are different than the Ink codes I use. So I'm wondering what other cartridges will the inks for 970/971 are also used for.
I would really like to buy this refill kit, but the shipping rates to Chile are INSANE (US$130 aprox). Is there other way to buy this using other shipping methods or something? please help! Thanks.
The details on filling amounts can be found on our website at www.rjettek.com Just move your mouse to the Tech Support tab, and then move to "Instruction Sheets" on the drop down list and click. Next click on the line for the HP 970/971 instructions, and go to page 4.
iv got a office jet pro 476dw i reffiled the cartdriges and stil detect empty, in the screen it says original cartdriges used previosly detected. can any one help me?
Does anyone know how to do the refill on the 913a/973x? I have noticed that the spring where the syringe is usually pressed is now a rubber seal and is no longer usable after being pressured. I need a fix to this asap if anyone can help? Thanks
There are two separate chambers on the 907/971. The 950/0932 process of filling will only fill the small chamber where the exit port is. That is why to fully refill the cartridge you have to remove the ball plugs.
Update, I got this ink and it DOES NOT WORK. It dries in the print head causing you to run through the factory setting to clean print head if you let it sit overnight. The system is great as far as filling goes, seems this is not the correct ink though so beware because you will clog up your print heads if you buy this brand ink for this specific HP X551dw printer.
Since there has been no official reply. I want to share my experience. I am refilling 972 cartridges for Pagewide 477dw. It seems cartridges on these printers will only work one time... BUT if you keep an eye on your useage you CAN refill several times so long as you do it BEFORE it says empty (and do this when the power is off so it doesn't know you removed the cart. However after some time it will eventually warn you that the printer is not designed for continuous ink systems and you will be forced to replace the cartridge. This happened to me after 7500 pages apx. When I tried to leap frog, it warned me about the continuous ink system and wouldn't print. I will report again once I can try this with 2 regular cartridges rather than one regular and one starter. FYI I refilled using negative pressure in the first chamber only.
Edit. While I cannot leap frog, turns out you can refill the cartridge and reinsert it. It will warn you to only use the cartridge if you know it still has ink... and then another message about a previously inserted cartridge. But it still printed. Not sure how long this will last on this cartridge. On that note, I did refill the stater cartridge several times until it finally said not compatible with continuous ink systems. That cartridge I know for sure will not work as I have tried leap frogging it. Not sure if it is because it is starter or it has been flagged as continuous ink.
What happened with 2 regular cartridges?
I just ran out of ink on my hp 477 dw. What's the protocol for refilling the hp 477 dw? Can I Just refill it following the process on the video ?
I ordered. I've tried this before with no success but have faith your system is working based on other reviews. I wrecked brand new printers trying to do this already but here we go again! QUESTION: other videos describe an internal bladder that needs to be collapsed via a syringe pulling air out, you make no mention of this. Other suppliers state that there is negative vacuum pressure in these from the factory and describe how to pull air out as you fill...Thoughts?
Do you sell these products in India
Will you guys do an update video for the 972A/X cartridges which are used by the new HP Pagewide printers? The cartridge looks really similar. Perhaps vacuum refill method with your qu-fill tool?
Why is this method different compared to your Hp 933xl video which is almost identical? No need to prime the cartridge and suck any remaining air out? It seems that is easier just to remove the plastic plugs, add the ink and replug again with the rubber ball instead of using ths special needles.
Thanks for the video, Very helpful except for the fact of what ink to use. In your video the ink looks the same as the ink for 950/951. I was told by one source that the 970/971 uses the same ink as the Canon PG-40/50 or PG-5 for the black and CLI41/51 or CLI-8. This doesn't seem right. Your ink codes are different than the Ink codes I use. So I'm wondering what other cartridges will the inks for 970/971 are also used for.
I would really like to buy this refill kit, but the shipping rates to Chile are INSANE (US$130 aprox). Is there other way to buy this using other shipping methods or something? please help! Thanks.
Hi. From where I can buy the balls , for cartriges ?
Saya nak order macam mana..
what about cartridge chip?
Remanfumance type of 970/971Xl ink cartridge price is 79USD/set , with pigment ink insider , 260ML +120ML*3
The details on filling amounts can be found on our website at www.rjettek.com Just move your mouse to the Tech Support tab, and then move to "Instruction Sheets" on the drop down list and click. Next click on the line for the HP 970/971 instructions, and go to page 4.
where can i buy the tools ? and what about chip reset ?
HOLA, SE TIENE QUE CAMBIAR EL CHIP?
i think the LEAP FROGGING doesent work for me. why?
it always detect the cartdriges empty and the new one is full
en que parte puedo recargar los cartuchos
iv got a office jet pro 476dw i reffiled the cartdriges and stil detect empty, in the screen it says original cartdriges used previosly detected. can any one help me?
Does anyone know how to do the refill on the 913a/973x? I have noticed that the spring where the syringe is usually pressed is now a rubber seal and is no longer usable after being pressured. I need a fix to this asap if anyone can help? Thanks
What's stopping us from refilling them like the 932/933 950/951 ?
There are two separate chambers on the 907/971. The 950/0932 process of filling will only fill the small chamber where the exit port is. That is why to fully refill the cartridge you have to remove the ball plugs.
Update, I got this ink and it DOES NOT WORK. It dries in the print head causing you to run through the factory setting to clean print head if you let it sit overnight. The system is great as far as filling goes, seems this is not the correct ink though so beware because you will clog up your print heads if you buy this brand ink for this specific HP X551dw printer.
descobri como eliminar de vez as mensagens de erro quando instala o cartucho usado na impressora.
+victor kretli como se faz para eliminar a mensagem?
thankyou rjettek1