a better way to sand it down is to super glue sandpaper to a flat surface and slowly rub the object on it til its smooth. You can use different grits as well. I would maybe start at 80 grit and go all the way to 600 grit or even more if you want it super smooth. Also when it comes to finishing it s better to first sand off all the old finish then spray on a few coats of primer. After the primer cures you can spray on the coats of green til you get the color you desire. Add the details and then lock it in with a clear coat. You can buy custom nameplates online and there is also probably a way to make them yourself however I'm not to sure about that.
I personally prefer using Take N Play and Take Along for Narrow Gauge engines, while I use Wooden Railway for Standard Gauge engines. Mainly for scale accuracy.
What if u got modelling puddy and remove the back and front magnets, then use the puddy to extend the chassis and place the magnets back, Then buy a special funnelled Peter sam, to not have to make the custom again u add blue tack and make the smoke box removable, and u can switch the smoke boxes when u need them, if one smoke box is to big get another of the same smoke box (well this is getting expensive) then cut off the funnel, use the original funnel and glue it on so u have a better coupling system and a special funnel version u can place on when ever u want U could also add a paper print of the name plate and number, maybe put them on blue tack for Peter sam version and Stuart version
2:14 you didn’t really have to do that. My friend was at my house one time, and I had a track master push along Thomas and we threw it against the ground, super hard, and it came apart completely.
You are an adult you can do this on your own but with another adult with you when me and Dad do customs he does the painting and I do the filming of the videos and the numbers he does the numbers did you like that idea?
The thumbnail is the best thing ever
Name: petr sm
Ah yes Sodor fallout new episode! It’s killing Peter sam with a knife and other stories
@@Stepney_Studios yas
Peter Shamked
@@Stepney_Studios what did you say? >:(
a better way to sand it down is to super glue sandpaper to a flat surface and slowly rub the object on it til its smooth. You can use different grits as well. I would maybe start at 80 grit and go all the way to 600 grit or even more if you want it super smooth. Also when it comes to finishing it s better to first sand off all the old finish then spray on a few coats of primer. After the primer cures you can spray on the coats of green til you get the color you desire. Add the details and then lock it in with a clear coat. You can buy custom nameplates online and there is also probably a way to make them yourself however I'm not to sure about that.
Thanks I’ll take that into consideration next time.
You painted this custom very well! Great Job!
😮 a other truck
It looks alsome!!! Although I'd reccomend pushing the chasis a bit more forward so then the front magnet isnt so tucked under 👍
Ikea knife lol (Great custom btw)
“I gave up all my life savings” uummmm ok
Little clever idea use a small four wheel chassis and use a ertl body of the narrow gauge engine and hope it fits
This was a great custom and fun to watch!
The outcome is really amazing, good job!
Peter Sam had to just smile as he was being chopped to pieces
Yeah the custom looks amazing!
This looks good
1:23 the definition of “safety”
Finally, you got the bogie wheel but you forgot James is
If you move the body back a little, this looks great!
Heh did not see this till now and hullo
Love it! You need more subs like RN
Thank you
Np
1:28 peter sams face is like *im in danger*
I recommend using a saw to cut the boiler and the running board down.
0:00 (paused) that Gordon tho
I personally prefer using Take N Play and Take Along for Narrow Gauge engines, while I use Wooden Railway for Standard Gauge engines. Mainly for scale accuracy.
What if u got modelling puddy and remove the back and front magnets, then use the puddy to extend the chassis and place the magnets back,
Then buy a special funnelled Peter sam, to not have to make the custom again u add blue tack and make the smoke box removable, and u can switch the smoke boxes when u need them, if one smoke box is to big get another of the same smoke box (well this is getting expensive) then cut off the funnel, use the original funnel and glue it on so u have a better coupling system and a special funnel version u can place on when ever u want
U could also add a paper print of the name plate and number, maybe put them on blue tack for Peter sam version and Stuart version
in my opinian i like push alongs
Epik
cool
Great now do it 4 more times with Geisel ejector, no funnel, drain pipe, and a wonky old funnel
I love the Peter sam you made it's so cool and awesome
I'm Jordan raider-hardin I like Roblox and Thomas the train
Cringy yet good.
8/10
Peter Sam The Friendly Engine
1:11
Jokes on you, I AM an adult! I can supervise MYSELF doing dangerous things with sharp objects!
This is cool
wtf 2:18 looks like a dog ate the bottom part
Do you know what that’s fantastic
Nice job!:)
Whoa That Amazing Congrats !
Looks awesome
Peter Sam at thumbnail= help me ;)
Epiko
Actually, u could have just taken the back wheel off, and put the push along wheel in there instead
This was my birthday month The same day was it
Cool
4:15
Ah yes unscrew a nail seems to make sense
Little engineers Peter Sam
How do you restore Peter Sam’s nameplate? It’s starting to Fade
Use a drill to get the holes
Lol 4 wheel thomas
3:36 4:14
Lol
Instructions unclear, I made a custom out of my finger with the knife.
840th like! Pin pls!
You get ‘s to sell this coppies of this customs next to eBay
I don’t wanna sound mean but that custom looks kinda weird, just my opinion.
Just yo-yos a sharpy
You burned the wheels off didn’t you
2:14 you didn’t really have to do that. My friend was at my house one time, and I had a track master push along Thomas and we threw it against the ground, super hard, and it came apart completely.
I just stick scissors in the hole for the front copling to pull it apart, and easier way would be unscrewing a AEG push along
How do you couple cars/trucks to him?
A magnet
I guess you could say it's to-pe Sa
You are an adult you can do this on your own but with another adult with you when me and Dad do customs he does the painting and I do the filming of the videos and the numbers he does the numbers did you like that idea?
2:26 if you got a drill I would have been able to remove the screws and pull of the bottom 😭😭😭
Use Mille put
That one time Peter Sam got plastic surgery
bro for the love of god, please just buy some sand paper at Walmart or something please.
Bro
Peter Sam gets stabbed and other stories
Wow, 3k views
I can make it in qorter ove the time
Qorter?
yes
No more peter sam tunnel
Omg. Watching this guy defiling this rare artifact to shorten it kills me inside. No offense.
Non taken! 😆
THIS GUY JUST KILLED PETER SAM BEFORE WE EVEN SAW THE CUSTOM! YOU CANT SHOW THAT ON UA-cam! UA-cam KIDS RULES YOU KNOW?!?!?
No he didnt
Looks bad in my opinon
Thanks and I know!!
Wen u hate thomas tvo’s cannot