Oh my goodness! I’m gobsmacked by some of these ideas! These will give me back some of my independence! I’m a 70yo woman! Always been independant and “handy” but in recent years I’ve been unable to do many things I used to do with ease! I’ve severe osteoarthritis! Thank you so much! 🙏
My grandfather taught me the bar soap on wood screw threads as a thread lock when I was 7-8 years old. 30 years later I still use it here and there during house, deck, fence, and shed repairs. Best trick for exterior because temperature fluctuations causes softer woods, like pine/cedar etc., to expand and contract.
The bar soap is there for lubrication, I use it as well sometimes. I'm not very convinced it can be used as a thread lock, it's just a soap, not very hard but hey anything is possible
@old ogre that's what I use. Tee lights. A lot cheaper than soap and softer and easier to use plus you don't need to cover the whole screw, once a bit lubricates the first part of the hole you're good to go.
Eres un genio como muchos soy un seguidor de UA-cam y es impresionante ver tantas ideas y gracias a Uds he logrado rescatar algo muy personal ser más humilde en la vida y Uds me enseñan a no creerme superior gracias por tus habilidades que Dios te ha dado en tu mente y manos y por compartir tus grandes ideas que Dios te de humildad y sencillez en tus futuros proyectos agradezco de poder formar parte de esta gran familia que es UA-cam
THANK YOU for actually showing how you did the picture. & right away. Genius ideas & SO organized. Nice music. Non of the crappy chatter. The saw angle. Lol great !
Just when I thought the 90 degree super-pencil was a game-changer, along comes the pinnacle of genius; The pounding of a stubborn nail flat into the board because you can’t seem to pull it out after a couple of attempts. It always seems so easy yet that’s the brilliance of this technique. Quite astonishing.
I don't watch these type of videos for a single solution to a single problem on a single day, instead, I watch these type of videos because they teach me how to think outside of the box, so that I can solve a multitude of problems throughout a life time when they arise. kind of like the quote "give a man a fish and you feed him for a day, teach a man to fish and he can feed himself for a lifetime".
I've used a VW Polo car jack exactly the same way (about two years ago) to disasemble pallets to build pallet coffee tables. But you can damage the jack.
This is probably the first video with a title like this where I can at least see why someone would need these ideas. I will probably even end up using some of them! Of course it's not anything groundbreaking, but it reminds you to think outside the box. Everyone in the world has something else laying around, so when we need a quick "invention", we craft it out of that. But you might not think of other uses for things you never use, and thus, never buy. Now, time for me to go buy a few more clamps. One can never have too many of them.
Thanks for your comment, dude! I didn't want to sit through like half this 12-min video and then decide it wasn't worth my time. Fake DIY videos are the current plague of UA-cam and all that. Thanks again. Much appreciated.
@@TheRealFaceyNeck Honestly, I only clicked on it because I thought: "Oh come on, what could you possibly make out of a cut up spoon?" I tend to ignore DIY videos like this after seeing someone "solder" with a bit of wire glued to a lighter. But I have to admit, this one is actually kind of useful. It certainly gets the creative juices flowing.
... but u need a lot of tools to do all this kind of work! And sometimes u need to create your own tools according to your creative needs as they may not be readily available in market! Well, I too belong to that tribe! 💕
Сюда надо добавить ещё один совет,что делать,если вы упали в яму с тигром: открутите себе яйца и выбросьте их. Они всё-равно вам больше не понадобятся!)
Granted, these ideas are unique, and admittedly, pretty clever and cool...but none the less, completely impractical for us every day working Joe's, we just grab a hammer and start swinging, or pick up a sheet of ply wood and pack it wherever we need to go with it, honestly we just wouldn't really have the time to do all of that just in order to make it easier, alot of us are on a timeline and every second counts!
Интересное совпадение. И меня дед научил А отец , так в голодные 90е делал мормышки и блесны профессионально, сдавал на реализацию знакомому продавцу со старого "птичьего рынка"
I have an issue with using the drill to mix the spray paint can. Centrifugal force would move the mixing ball and the paint to one side of the can and just spun it around. Nothing will get mixed.
3:58, las sierras japonesas son mucho mejores para cortar, son más precisas y muchísimo más afiladas, y el filo está hacia el lado opuesto, son excelentes porque no dejan prácticamente ninguna astilla en los cortes
2:1 Spinning a can will not mix the paint. 2:55 Why ruin the pencil? Just hold it under the board. 3:59 The ragged cut is on the up-stroke. The clean cut is on the down-stroke, with or without the tape.
Oh wow!! What a Mind at "work"... What a "genius"... Oh.. I never new such greatness could be true, oh master... I'm already at "another level"... Bless us all with your "ingenuity" and "greatness, master of all the secrets of the Universe.... Mr inventor... Now I can bask in the light of your "unsurpasable and useful ideas" that will carry my Soul to the next level of existence... Before you came, I couldn't find a way to fix my $2.00 broom, or spin and mix the paint in a can, or plug all of the wrong sized holes I made in my petty life... but most of all, Now I can screw and unscrew, Finally! all the left over projects with all the loose bolts because I could not "afford" a crescent wrench in my poor and miserable existence! Thank you Master!!! Bow, Bow, Bow in reverence to your omnipotent presence, Bow, Bow, Bow wow!!
Phoenix One - you have to understand .. there are a lot of morons that watch these sort of videos - people that are incapable of creative thought. Unfortunately there are too many videos like this.
@@chenks54 а при чем тут "творческое мышление"? Из всего видео рабочими являются 3 предмета, но с оговорками. 1. Блесны из ложки. Их ещё мой дед в молодости делал. 2. Расборка подонов домкратом. Для нескольких подойдёт, на если нужно разобрать много подонов, то легче подложить кусок дерева под фомку. 3. Самодельные венчики для краски. Этот способ подойдёт только для лёгких красок, которые в ручную размешать быстрее. А если нужно размешать что-то более плотное, вроде битумного праймера, то нужно использовать крепкий заводской венчик. Вот и выходит, что эти видео просто засоряют голову.
I have to say all of these are awesome ideas and would definitely help but 1 thing. The pencil. Thats got to be 1 of the dumbest ideas. Hell just scribb underneath the wood. You dont need a 90 degree angel pencil. Not only that when you have to sharpen your pencil and your close to the seem you have to throw it away.
Oh my goodness! I’m gobsmacked by some of these ideas! These will give me back some of my independence!
I’m a 70yo woman! Always been independant and “handy” but in recent years I’ve been unable to do many things I used to do with ease! I’ve severe osteoarthritis!
Thank you so much! 🙏
I once made a Spinner fishing lure out of a Silver Mercury Dime.
My grandfather taught me the bar soap on wood screw threads as a thread lock when I was 7-8 years old. 30 years later I still use it here and there during house, deck, fence, and shed repairs. Best trick for exterior because temperature fluctuations causes softer woods, like pine/cedar etc., to expand and contract.
Também aprendi isso com o meu avô.
The bar soap is there for lubrication, I use it as well sometimes. I'm not very convinced it can be used as a thread lock, it's just a soap, not very hard but hey anything is possible
Também aprendi com meu padrinho marceneiro que isto serve para apodrecer o parafuso caso seja feito de ferro.
No use no but VCU
@old ogre that's what I use. Tee lights. A lot cheaper than soap and softer and easier to use plus you don't need to cover the whole screw, once a bit lubricates the first part of the hole you're good to go.
What I found impressive is this mans paperclip and rubber band collection must be pretty immense.
Don’t forget all the bulldog clips! 😁
Boas ideias que nem toda a gente tem parabéns mister inventor
The right angle pencil is good too, might I recommend adding baking soda to the super glue 👍🏼 strengthens the bond
Sencillamente increíble mucho ingenio ,,,👍👍👍
Muchas gracias por compartir tus conocimientos. Excelentes aportaciones 😃👍
A few handy ideas here that aren't just repeats of repeats of repeats from a hundred other channels!
Yeah I hate seeing repeats. Especially when it's vids from the same channel, or in the same vid like one I saw last night.
Eres un genio como muchos soy un seguidor de UA-cam y es impresionante ver tantas ideas y gracias a Uds he logrado rescatar algo muy personal ser más humilde en la vida y Uds me enseñan a no creerme superior gracias por tus habilidades que Dios te ha dado en tu mente y manos y por compartir tus grandes ideas que Dios te de humildad y sencillez en tus futuros proyectos agradezco de poder formar parte de esta gran familia que es UA-cam
I do not say this lightly, " I am impressed!" Thank you!
3D
@@gurlalsingh6936 wsaldatore a gas
Quel bonheur, pas de musique repetitive et énervante au fond.🙂
Nothing more satisfying then making your own
THANK YOU for actually showing how you did the picture. & right away. Genius ideas & SO organized.
Nice music. Non of the crappy chatter.
The saw angle. Lol great !
Hammer !!!! Du hast eine Aufreihung verdammt guter und nützlicher Tips aufgezeigt !!! Danke für das sagenhafte Video !!!
Just when I thought the 90 degree super-pencil was a game-changer, along comes the pinnacle of genius; The pounding of a stubborn nail flat into the board because you can’t seem to pull it out after a couple of attempts. It always seems so easy yet that’s the brilliance of this technique.
Quite astonishing.
I don't watch these type of videos for a single solution to a single problem on a single day, instead, I watch these type of videos because they teach me how to think outside of the box, so that I can solve a multitude of problems throughout a life time when they arise. kind of like the quote "give a man a fish and you feed him for a day, teach a man to fish and he can feed himself for a lifetime".
0
ОТЛИЧНО СКАЗАНО!!
I've used a VW Polo car jack exactly the same way (about two years ago) to disasemble pallets to build pallet coffee tables. But you can damage the jack.
Vc são gênio adoro suas aulas gotaria de apreender muitos com sãs ablidades
電気コードの結ぶやつに秀樹感激Goodです=3
Что для Европы - гениально, то для бывшего Союза - элементарно!
tak, sowiecka technika zawsze była znana w Polsce. Na przykład wbijanie śrub młotkiem
@@jarosawdobas6327 я про польскую технику вообще не слышал.
@@evgeniyson3234 а как же знаменитые инструменты для ПШЕничных полей?
This is probably the first video with a title like this where I can at least see why someone would need these ideas.
I will probably even end up using some of them!
Of course it's not anything groundbreaking, but it reminds you to think outside the box. Everyone in the world has something else laying around, so when we need a quick "invention", we craft it out of that. But you might not think of other uses for things you never use, and thus, never buy.
Now, time for me to go buy a few more clamps. One can never have too many of them.
Thanks for your comment, dude!
I didn't want to sit through like half this 12-min video and then decide it wasn't worth my time. Fake DIY videos are the current plague of UA-cam and all that.
Thanks again. Much appreciated.
@@TheRealFaceyNeck Honestly, I only clicked on it because I thought: "Oh come on, what could you possibly make out of a cut up spoon?"
I tend to ignore DIY videos like this after seeing someone "solder" with a bit of wire glued to a lighter.
But I have to admit, this one is actually kind of useful. It certainly gets the creative juices flowing.
A
Thank you so much for awesome ideas. Fresh ideas!! Make work easy.
you cut up a $50 spoon and make $1 lure ..awesome hack
A lot of this shows the use of "common sense" in solving problems and coming up with solutions! 😁 A real good video.
Excelente s,, IDEAS!!! Mil gracias!!!
... but u need a lot of tools to do all this kind of work! And sometimes u need to create your own tools according to your creative needs as they may not be readily available in market! Well, I too belong to that tribe! 💕
Boa noite, gostei da sua idéia.
Recorde a mi papito Miguel. Es seco muy ingenioso 😘
awesome trick picking up screws with the shop vac. : )
It also works with Lego bricks. 👍
I really enjoy your videos!
Parabéns muito bom bom
if some people only knew. These ideas can go along way.
I don't know why I never thought of using a jack to take apart pallets.... I learned something useful, thanks!
That can mess up the jack. At least, that's what I've been told.
That was some really useful information thanks for sharing, much appreciated 👍
Some ideas need a little more testing.
@@craigb8228 yeah you probably got a point 👍
invaders. I suggest using a power drill on the jack to open the pallets...faster. Thanks for the video.
Такие блесна мы делали в70-80 г. Отлично выходило.
А ложку обязательно портить.Мы делали из куска нержавейки.
¡¡¡¡¡¡¡¡¡¡¡¡SOS UN GENIOOOOOOOOOOOO!!!!!!!
Adorei 🇵🇹🙏
Wow amazing ideas friends . ❤️👍
good sharing, so useful
Сюда надо добавить ещё один совет,что делать,если вы упали в яму с тигром: открутите себе яйца и выбросьте их. Они всё-равно вам больше не понадобятся!)
Granted, these ideas are unique, and admittedly, pretty clever and cool...but none the less, completely impractical for us every day working Joe's, we just grab a hammer and start swinging, or pick up a sheet of ply wood and pack it wherever we need to go with it, honestly we just wouldn't really have the time to do all of that just in order to make it easier, alot of us are on a timeline and every second counts!
a few new ideas for me and usable ones ... good
Muito bom.
Those are some quality tools you got there huh 😅
О,, класс!
С уважением и почтением.
Great ideas!
Спасибки😁👍
Блесны из ложек я делал когда мне лет 10 было..
И кстати ловилось неплохо
Тебе сейчас сколько ??
Старый. Полтос скоро
@@user-jk1iq9vd1y мне уже больше полтоса !! И такие блесны из ложек меня научил дед делать в детстве !!
Интересное совпадение. И меня дед научил
А отец , так в голодные 90е делал мормышки и блесны профессионально, сдавал на реализацию знакомому продавцу со старого "птичьего рынка"
@@user-jk1iq9vd1y и мормышуи самопайные из свинца и припоя ??
La prova della discesa sull ondulina di eternit...top!!
New subscriber. Excellent video! Thanks for sharing your knowledge!
Buenas ideas !!!
Wow, felicidades.
I already knew about some of the things, but some I didn't. Very cool stuff.
Cool! Thanks for sharing!!!😊👍✌️🇬🇧
Loves using that bar clamp damn... I wonder if he knows what it was actually made for 🤷🏻♂️
I have an issue with using the drill to mix the spray paint can. Centrifugal force would move the mixing ball and the paint to one side of the can and just spun it around. Nothing will get mixed.
First video of this type that was worth watching. I'm a subscriber now!!
Bonnes idées merci
Amazing konten Kreator teknologi inovatif and Education full good job and good luck i'm From INDONESIA
Great video, keep up the hard work 👍
Merci d'avoir laissé l'audio d'origine 😉
Видео для людей без фантазии. Пользуйтесь! :)
Wonderful 👍
The drill and spray-paint is creating a centrifuge. The contents is likely being separated by density
Great ideas Mr Inventor👍
Интересно, но некоторые сюжеты взятые из других роликов, и становится не понятно, кто у кого срисовывает и на кого подписываться.
Good stuff!
Thanks for the tricks. But I don't know why you have all your tools rusted man. You should go buy some new ones.
Awesome 👌
Galing nman
Cool ideas
3:58, las sierras japonesas son mucho mejores para cortar, son más precisas y muchísimo más afiladas, y el filo está hacia el lado opuesto, son excelentes porque no dejan prácticamente ninguna astilla en los cortes
How did you cut the spoon in half??
WOW!!!👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿😎
You should have a TV show... MacGyver 2.0!! Great ideas.
2:1 Spinning a can will not mix the paint.
2:55 Why ruin the pencil? Just hold it under the board.
3:59 The ragged cut is on the up-stroke. The clean cut is on the down-stroke, with or without the tape.
Show de bola 👏👏👏👏
So we just scored that spoon with the tip of a drywall screw and snapped it in half?
Give you some ideas so when you go up and down the aisles in Harbor freight 😂🤣
4:57 No way! No way! Woah!
Bạn có nhiều mẹo và sáng tạo nữa
Super ! Makes me smile 😅
Nicè👍👍👍👍
Прикольно. Много полезной информации
That First Tip wouldbt Last Long IT will Break the Plastik very fast 😂
love the bit where he fucks up a pencil for no reason
Oh wow!! What a Mind at "work"... What a "genius"... Oh.. I never new such greatness could be true, oh master... I'm already at "another level"... Bless us all with your "ingenuity" and "greatness, master of all the secrets of the Universe.... Mr inventor... Now I can bask in the light of your "unsurpasable and useful ideas" that will carry my Soul to the next level of existence... Before you came, I couldn't find a way to fix my $2.00 broom, or spin and mix the paint in a can, or plug all of the wrong sized holes I made in my petty life... but most of all, Now I can screw and unscrew, Finally! all the left over projects with all the loose bolts because I could not "afford" a crescent wrench in my poor and miserable existence! Thank you Master!!! Bow, Bow, Bow in reverence to your omnipotent presence, Bow, Bow, Bow wow!!
Phoenix One - you have to understand .. there are a lot of morons that watch these sort of videos - people that are incapable of creative thought. Unfortunately there are too many videos like this.
@@chenks54 а при чем тут "творческое мышление"?
Из всего видео рабочими являются 3 предмета, но с оговорками.
1. Блесны из ложки. Их ещё мой дед в молодости делал.
2. Расборка подонов домкратом. Для нескольких подойдёт, на если нужно разобрать много подонов, то легче подложить кусок дерева под фомку.
3. Самодельные венчики для краски. Этот способ подойдёт только для лёгких красок, которые в ручную размешать быстрее.
А если нужно размешать что-то более плотное, вроде битумного праймера, то нужно использовать крепкий заводской венчик.
Вот и выходит, что эти видео просто засоряют голову.
Smart!!! Lars
Boom! The skid one is a game changer! Thanks!
А если кончик шурупа по дереву отбить молотком чтобы шуруп бурил деревяшку чтоб не расширялась она при вкручивании
You, sir and a bloody genius!!! Thank you for sharing this with the world!!!
*are a bloody genious*
You spelt genius wrong. But I'm sure we'll get it on the third try! Never give up, people!
These are some of the best ideas that I've ever seen. Excellent!
Dar um no na extensão é bom que se enroscar na extensão não solta a tomada, cai o aparelho
Top.
I really wish that I had a 90 degree pencil. Don't know how I managed to get by without one...
🤣🤣👍😁
@@warricklawrence2057 n
.
Tom Henderson If you need a 90 degree pencil you might as well make a 45 degree and a 22.5 degree to go with it , 😜
what band saw is that?
I have to say all of these are awesome ideas and would definitely help but 1 thing. The pencil. Thats got to be 1 of the dumbest ideas. Hell just scribb underneath the wood. You dont need a 90 degree angel pencil. Not only that when you have to sharpen your pencil and your close to the seem you have to throw it away.
Ikr, I thought it must have escaped from an April 1st video
Love the elon musk hack saw
What is the red liquid?