I swear Bobo your mods look like they belong in an art museum with how smooth and beautiful they are. I can already see nerfers walking through a bobololo exhibit lol
Damn bobo! Im glad not not be looking down the business of that beast!! With the snikas cage did you extend the brass barrel or widen the barrel at all? You may want a red dot with the cage as well, especially if your running koosh darts. With a little warm up on mine I can put darts on target at range with ease. Looking forward to the war footage!
One improvement for the stormfire is putting the turret swap key on a little piece of rope that is attached to the blaster, so there is no chance of dropping the key when turret swapping.
Sweet build, only comment about it would be the gloss coat is a little too reflective, it highlights some of the e-putty areas, I personally would prefer matt, but the scheme is nice though.
Hey Bobo! I just bought Buzz Bee Air Warriors Ultra-Tek Sentinel and I really like it. Only downside is that there are only 8 darts in the clip so I was wondering where I could buy new clips so I don't run out of ammo so quickly? :)
That is so awesome, I wish I could mod like you can! I can't even replace the spring on my Longstrike which is now in pieces, but luckily I've still got the barrel intact.
have you seen Outof Darts's new project, if so will you try to get one on you gun sometime later on in the future? Also why don't you make the swarmfire turret use magnets stay in the front of the blaster as well?
I have used 65D in the past and have had issues with it in terms of ratios. Multiple times I've gotten near 1:1 ratios only to have the 65D not cure correctly and have to be removed. For the smaller gaps, I used a LOT of Loctite 5 minute set- 2 part epoxy. I forgot to mention it, but I used almost 80% of the bottles filling gaps on this thing. For large gaps, nothing beats epoxy putty, IMO.
Amazing mod absolutely stunning. Forgive my ignorance but I thought if you had more motors you would want more cells in your battery. With at least 4 motors wouldn't you want at least a 4 cell battery?
Would three MTB honey badger motors in a rapidstrike running on a 9.6 NimH battery work or would I have to upgrade to three MTB rhino motors on a better battery?
OG integrations are always da bomb!!! Love it!!! I love the overall look though I would have painted it more post apoc/steam-punk to fit the HVZ use... Excellent blaster man!
just a tip, use smooth cast 65 D for your Integrations it's SUPHA strong and you will break the plastic befor the Integration. It's quite expensive, but HOLLY CRAP it's worth it!
I've used it before. While it worked nicely, it's finicky with the ratio. I would be just sliiiiiiightly off 1:1, and it wouldn't cure properly even after a few days. That and it can't be used for gap filling are why I always go with epoxy putty and liquid epoxy.
oh I just talked to Tom and he recommended 3 hellcats because the xp are volt hoggers and he never uses 130 motors as a pusher. Why do you need a fuse is it because of high current coming through the lipo.
Hellcats are great, torque-y motors. You don't need any torque with the pusher though. It's so in case there's a stall (at a certain amperage. 40A would be for 2 motors stalling, for example) the LiPo doesn't get surged and the circuit can be cut off so nothing keeps running- potentially causing problems.
I just had a idea a MTB wolverine on a 2s get 12darts a second on a 2s which is amazing. Xp 180s r the hardest hitting motors on the market so if you have a wolverine 180 as a pm and 2 extreme 180 motors you will be unstopable. You should try that. You'll need a big ass lipo though.
It bugs me that you are not shooting with the hill right behind the target. If you moved the target over just a little then you would not lose as many darts
What's the perfect LiPo for a Stampede. I'm planning on rewiring mine with the proper wire gauge and everything, I trust you'd know what LiPo to use since you make amazing Stampedes
hmmm i love how quiet the rapid strike is. but im wanting to make a rayven into full auto (or somekinda bullpup setup) that is as quiet as can be but still high powered
"Quiet" and "flywheels" don't really go together. Mine sounds quiet because I use audio limiters so my videos stay under a certain decibel range. You can get some quieter set-ups with balanced flywheels and aluminum cage, but they'll still have some loudness to them.
+Excalibur 4249 Based on the fact that it has swappable turret heads it's a minimum of two or three. But it was really just a joke, and a Star Wars reference.
+TheRambler ah I always thought that he just had them lying around same way coop772 has a crap load of stryfes around On another note, how did I not catch that reference?
It's a blade style fuse I got off Amazon. You can also get the holder there too- just make sure you read the dimensions before buying... this one was MASSIVE even after cutting it down.
Sorry to disappoint. If I'm not mistaken, BSUK either put that on hiatus or stopped completely. I wish I showed this (may do it in a load out video?), but the Rapidstrike has amazing burst fire control with just your trigger finger. Extremely responsive and crisp. No need for fancy wiring and programming.
ik but i still like the option, sometimes when u get close and nervous u just SPAM and waste ammo, i like ponytails too, also at 1:11 is that hawki007? if so can u review his hyperstryfe effortless thingy
This blaster is pretty much a sleeper. What did you change?
I think that pink wiring is super cool; it would have been neat if the black wire was purple to complete the theme :)
I swear Bobo your mods look like they belong in an art museum with how smooth and beautiful they are. I can already see nerfers walking through a bobololo exhibit lol
A beautiful blaster and by far, the most amount of features I've ever seen. Absolutely fantastic work, Will.
Your paint jobs on this and the pink menace make me so happy.
But...there's no...saw.
Unless you count the fact that viewers on UA-cam..."saw" it.
\:o
Damn bobo! Im glad not not be looking down the business of that beast!! With the snikas cage did you extend the brass barrel or widen the barrel at all? You may want a red dot with the cage as well, especially if your running koosh darts. With a little warm up on mine I can put darts on target at range with ease. Looking forward to the war footage!
Rapidstrike/Stampede integrations are always the coolest.
One improvement for the stormfire is putting the turret swap key on a little piece of rope that is attached to the blaster, so there is no chance of dropping the key when turret swapping.
I missed this video last week and its so badass
Bobo....is....AMAZING!!!! He thinks of/plans for EVERY contigency!!! Him, Drac, and Coop would win any war against any number of opponents!
they should all go to nvz together. bobo and coop destroy the horde while drac snipes with his alpha trooper.
That fuse and battery holder is amazing,
Sweet build, only comment about it would be the gloss coat is a little too reflective, it highlights some of the e-putty areas, I personally would prefer matt, but the scheme is nice though.
Also while you are reloading the Rapidstrike, you can have the swarmfire to protect yourself, as well as being able to frontload the swarm fire.
holy crap, that's a beast. it's fantastic and really says I'm the big boss!!! Very fantastic build
This is amazing. Fantastic job bro, have fun at NvZ!!
I like the blaster because it has a front loading blaster and a clip fed blaster so you can always be ready!
Ya, sorry
when i saw that detachable part i fell in love
So badass. It really does deserve the name 'Pwnsaw'
Another great build well done bobolobololobo
You just took AWESOME to a whole new dimension!❄️🔥
Reminds me of the RYNO V from Ratchet and Clank.
You need to wait 3-7 days to put clear coat on your blasters. The paint emits chemicals that ruin clear coat if it's not done curing.
with the exposed wire you might be able to get heat shrink or electical tape on it
amazing mod. Goes really well with the pink menace
No purple silicone wire! sad face :( Awesome build dude. Can't wait to see it in action.
Well, that is a one horrifying chunk of plastic and elecronics. Good job man.
Needs more cowbell. :3
-Justin
XD
"No mortal should ever say more cow bell" (Percy's Greek heroes)
Make.Test.Battle Just integrate a cast iron cowbell onto the side of it!
RandOmSandw1ch _ a
holy smokes Bobo, this is absolutly tacticool
I love the magnet idea!
this is a Beast of a blaster. looks like something out of a video game.
Hey Bobo! I just bought Buzz Bee Air Warriors Ultra-Tek Sentinel and I really like it. Only downside is that there are only 8 darts in the clip so I was wondering where I could buy new clips so I don't run out of ammo so quickly? :)
My glob the darts are so inaccurate. The darts go everywhere. Guess that's why they are called flamethrower builds. Loved the teamwork with Hawki!
It just makes me so happy!!
killer job man, it looks fantastic!
I'm talking to tom, hawki007, drac, u, jodocast, and mag212 all at the same time. this is awesome. how much did those neodideum magnets cost.
That is so awesome, I wish I could mod like you can!
I can't even replace the spring on my Longstrike which is now in pieces, but luckily I've still got the barrel intact.
Just keep going. Don't let a bad mod stop you. Practice and push yourself :)
Damn, that thing looks beastly. I wish I could go to NvZ.
When you trim those shrubs how many darts do you think you will find?
I espescially like the swarmfire on there, it's genious!
That tac rail up top is niiice.
This has got to be the quietest Rapidstrike I've ever heard.
First! And about to head out to Missouri!
zombieland, nice shirt ;)
PwnSaw is gonna kill at DartCon and NvC. If you make it back still the proud owner of PwnSaw, I will be utterly shocked.
im in missouri pettis county
It's like a Fenrir 2.0, but much more fabulous.
AYYYY montana paint master race :^)
have you seen Outof Darts's new project, if so will you try to get one on you gun sometime later on in the future? Also why don't you make the swarmfire turret use magnets stay in the front of the blaster as well?
nosraL tinmaD it’s heavy lol the turrets gonna fall off
try using smooth cast 65d and painters tape to fill the holes
you will likely have to use less, and it will be extremely strong
I have used 65D in the past and have had issues with it in terms of ratios. Multiple times I've gotten near 1:1 ratios only to have the 65D not cure correctly and have to be removed.
For the smaller gaps, I used a LOT of Loctite 5 minute set- 2 part epoxy. I forgot to mention it, but I used almost 80% of the bottles filling gaps on this thing. For large gaps, nothing beats epoxy putty, IMO.
Amazing mod absolutely stunning. Forgive my ignorance but I thought if you had more motors you would want more cells in your battery. With at least 4 motors wouldn't you want at least a 4 cell battery?
More motors mean more current, not more voltage.
This mod is EPIC, keep up the great work! cool name for the mod btw
Would three MTB honey badger motors in a rapidstrike running on a 9.6 NimH battery work or would I have to upgrade to three MTB rhino motors on a better battery?
Big fan on the colors!
Awesome work!! Do you have any chrono readings?
There are some averages during the firing demo.
RS: lower 130s
Swarmfire: mid 80s
Oh I see, stupid of me, but thanks anyway.
OG integrations are always da bomb!!! Love it!!! I love the overall look though I would have painted it more post apoc/steam-punk to fit the HVZ use... Excellent blaster man!
just a tip, use smooth cast 65 D for your Integrations it's SUPHA strong and you will break the plastic befor the Integration. It's quite expensive, but HOLLY CRAP it's worth it!
I've used it before. While it worked nicely, it's finicky with the ratio. I would be just sliiiiiiightly off 1:1, and it wouldn't cure properly even after a few days.
That and it can't be used for gap filling are why I always go with epoxy putty and liquid epoxy.
Love it! 1 thing that I would change would be the swarmfire, not a fan of it.
oh I just talked to Tom and he recommended 3 hellcats because the xp are volt hoggers and he never uses 130 motors as a pusher. Why do you need a fuse is it because of high current coming through the lipo.
Hellcats are great, torque-y motors. You don't need any torque with the pusher though.
It's so in case there's a stall (at a certain amperage. 40A would be for 2 motors stalling, for example) the LiPo doesn't get surged and the circuit can be cut off so nothing keeps running- potentially causing problems.
I just had a idea a MTB wolverine on a 2s get 12darts a second on a 2s which is amazing. Xp 180s r the hardest hitting motors on the market so if you have a wolverine 180 as a pm and 2 extreme 180 motors you will be unstopable. You should try that. You'll need a big ass lipo though.
Nice flywheel cage. It looks like it isn't even there!
If I were you,I would replace the retaliator grip with the modulus one because its much more comfortable.
Too late now! lol
It bugs me that you are not shooting with the hill right behind the target. If you moved the target over just a little then you would not lose as many darts
What's the perfect LiPo for a Stampede. I'm planning on rewiring mine with the proper wire gauge and everything, I trust you'd know what LiPo to use since you make amazing Stampedes
3S
i did the same mod a while ago. You can barely see it on Drac's Ohio vlog video.
long live the Bobololo nerf Viking god.
In the beginning Bobololo looked like a grown up Cailou
What song is playing in the video
Demilitarized Zone by Ethan Meixsell
+IAmBobololo ok thanks
+IAmBobololo dang
hmmm i love how quiet the rapid strike is. but im wanting to make a rayven into full auto (or somekinda bullpup setup) that is as quiet as can be but still high powered
"Quiet" and "flywheels" don't really go together. Mine sounds quiet because I use audio limiters so my videos stay under a certain decibel range.
You can get some quieter set-ups with balanced flywheels and aluminum cage, but they'll still have some loudness to them.
Also motor dampeners work, and surrounding your cage with noise reducing foam.
Unlike other mergers you look like a alpha chad
For future use you should brass the swarmfire
I don't have the patience, nor do I want to spend the money, to brass 3 full Swamfire turrets XD
What does the Blade Fuse do?
Bobo, can you run Extreme 180 with imr battery? If you can do you need a dummy battery to or not?
You caaaaaan, but IMRs aren't able to give the amount of amperage needed for most motor upgrades. You'll be putting extra stress on them with XP180s.
ok, can you recommend any other battery mayby a lipo that can fit in a stock stryfe tray or a extended one if it's needed leave a link please!
If you're asking me, then you should do more research on LiPos, how to handle them, and what the different specs mean for them.
thanks anyway, BTW your work is awsome!
Amazing video man! You are probably like the best at nerf paint jobs since they look like nerf did it themselves. Awesome job!!
BOLOLO HAS A THIRD HAND CONFIRMED
absolute madness bobo
Hasbro needs to call bobo and have him make a modded line.
I like the purplish-blue
This is awsome, much cool very many wow and thank you, you just gave me an idea for my 3K.
You should have pink and purple facepaint at nvz.
What is you have an entire fully functioning swarmfire?
I have two
lucky
That thing is awesome!!
You said neodymium right
Good luck finding those darts. Just gonna have to make another run to Target and buy more smh...
Or order more Kooshes for less. It was a sacrifice I was willing to make.
Many Swarmfires died to bring us this blaster.
I think only one
+Excalibur 4249 Based on the fact that it has swappable turret heads it's a minimum of two or three. But it was really just a joke, and a Star Wars reference.
+TheRambler ah I always thought that he just had them lying around same way coop772 has a crap load of stryfes around
On another note, how did I not catch that reference?
+Excalibur 4249 Hahaha it's harder when you're not hearing it in Mon Mothma's voice.
PWNSAW IS READYYYY
The "SAW" in PWNSAW reminds me of the M249 SAW :)
Didn't know it was swappable. Well, I'm gonna have a busy week
Can you find all your darts
What's the advantage of having such a high discharge rate?
Higher discharge rate just means you aren't stressing the battery in any way- there's enough amperage there and then some.
His shirt makes me wonder... what is rule #1?
Cardio
the intro was so funny😂😂😂😂
Man I wish I had a hawki helpful hand and a hawki living target
at 11:45 AR stand for air restricter right?
Yup.
why the stampede tho?
Now that's unique
is thayt hawki007 I see??
"Have it go BWOOP off into oblivion"
Bobololo 2016
where can i send fanmail
cute and badass nice mod bolololo
I'd prefer accuracy, but this works too
Where did you buy the fuse?
It's a blade style fuse I got off Amazon. You can also get the holder there too- just make sure you read the dimensions before buying... this one was MASSIVE even after cutting it down.
IT'S BEAUTIFUL!!!
You should make a swarmfire pistol that is just like the one on the gun but its not connected Name sugestion=Luegermorph
I thought the box next to the magwell was a burst fire control like fds
Sorry to disappoint. If I'm not mistaken, BSUK either put that on hiatus or stopped completely.
I wish I showed this (may do it in a load out video?), but the Rapidstrike has amazing burst fire control with just your trigger finger. Extremely responsive and crisp. No need for fancy wiring and programming.
ik but i still like the option, sometimes when u get close and nervous u just SPAM and waste ammo, i like ponytails too, also at 1:11 is that hawki007? if so can u review his hyperstryfe effortless thingy
is that for sale
what was the music at the start?
IF SOMEONE SAYS DARUDE SANDSTORM I WILL REPORT U FOR RACISM
Demilitarized Zone by Ethan Meixsell
IAmBobololo thnx