Really enjoy your videos Derek. We’ve disagreed in the past and I got a long way through this one thinking I might agree with your every assessment. There are two I might, possibly quibble with. Overall we’re on the same page though. Top work mate.
6.46 not to right dimensions from back wall too, min 50mm(cant see the rest) and if someone did replace that cooker knob someones been there with a souring pad. guessing game. love your uplaods. 8.30 i have one of them close to me. but its a glowworm or vaillant. i have thought about dropping off an old flue from a taken out boiler so they can maybe get it righ "next time". selfish i know. i just dont want gas safe inspector assuming i did that work. if i got all your questions right what do i win!!! i guess i failed though...................i never riddored anything.
Hi Derek, great vids as always! regards the final example (the water heater). Should we not also be concerned about the positioning of the plug in relation to the hot gases exiting the flue and the control knob is missing - wasn't that I.D.?
Very enjoyable , the cooker knob thing is a bit grey, maybe remove another knob , purge and relight , observe flame picture etc Albeit the hob shown would be a candidate for the above lol
Great content on pretty much all videos, very helpful & informative. One suggestion, if possible, would be to link any downloadable documents for us to access.
Number 9 would only be AR if it was not sealed internally and the flue was insecure . If it's just not cemented externally and no products entering then only NCS . Also the meter box one , most boxes of that type have the service and installation pipe work passing through that outer edge of the box but at the bottom, so how is it AR when it's at the top? . Are you suggesting there is a pathway for gas to enter the building when it passes through the top but not if it passes through the bottom as normal? This would be AR if it passes through the back of the box and not sealed allowing gas to potentially pass into the property .keep up the good work with these videos ,great resource for trainee's .
Number 9 is AR as the flue is not sealed and products of combustion could enter the cavity and the meter box one is AR as the integrity of the box is broken so it’s classed as like the door is missing.
I'm no gas engineer but in the thumb nail picture it seems to me that on the flue there should be a grommet to cover the hole to prevent CO ingress. I just took a gander at my boiler and there's no hole there at all. My service engineer puts the gas probe in the sampling port above when serving my boiler.
Don’t get you number 10 is the boiler that a builder has removed the walls around the boiler and is holding it up with wood and then has used a bit of rainwater pipe as a flue extensions. So you find the boiler the way of the picture so how’s that not ID and riddor
@@tomkatgastraining Yes I do now mate. Sorry.Totally got the wrong end stick. Sorry to hear your not doing the quizzes for now. Can't stress the importance of engineers understand IGEM G11 enough. Hope they pay more attention than I obviously did when I'm teaching them🙄
Loving the picture quiz, great way of topping up the memory bank, more please please
VERY informative, caught me out on a few of those. thank you very much for the training.
Thank you Derek
Your are always feeding up and brushing up our knowledges
I almost got 100 percent but you deffo stiffed me on the last one I noticed no sticker, but I'm calling spillage on the case and no controls. 😂. I. D.
Yeh case and above looks as if it has kind of spillage and controls
Best quiz so far, real life scenarios. Thanks
Keep them coming Derek 👍👍
As usual spot on!!!.
Keep them coming ... great to swat up
Brilliant bud. Thank you 😊
This is good. Keep em coming
Love these quizzes, humed and ha on q 2 . Q 3 I went for AR. Keep them coming. Unsafe Situations, even with IGEM11 can be confusing/ mis diagnosed.
Your videos are perfect and very clear. Tomorrow I have my ACS - Practical Assessment, I hope everything goes well.. Thank you very much.🙏
Good luck with it and let me know how you get on 👍🏻
Yes, I'll definitely let you know..But I'm very confident and everything will be fine.👊🙏👊
Quality viewing mate 😉 thanks for your efforts 😊
Very helpful
Great way to describe
Loved it
Great Quiz Derek.
Really enjoy your videos Derek. We’ve disagreed in the past and I got a long way through this one thinking I might agree with your every assessment.
There are two I might, possibly quibble with. Overall we’re on the same page though. Top work mate.
This is awesome! More please. I did get some wrong.
Great video 👍
Super helpful please keep doing your videos
Great video
6.46 not to right dimensions from back wall too, min 50mm(cant see the rest) and if someone did replace that cooker knob someones been there with a souring pad. guessing game.
love your uplaods.
8.30 i have one of them close to me. but its a glowworm or vaillant. i have thought about dropping off an old flue from a taken out boiler so they can maybe get it righ "next time". selfish i know. i just dont want gas safe inspector assuming i did that work.
if i got all your questions right what do i win!!! i guess i failed though...................i never riddored anything.
Hi Derek, great vids as always! regards the final example (the water heater). Should we not also be concerned about the positioning of the plug in relation to the hot gases exiting the flue and the control knob is missing - wasn't that I.D.?
Very enjoyable , the cooker knob thing is a bit grey, maybe remove another knob , purge and relight , observe flame picture etc
Albeit the hob shown would be a candidate for the above lol
🙏😊
Thanks alot
🤘😎🤘
The final picture looks like it has soot marks on the casing. Surely makes it ID?
👍🏾
Great content on pretty much all videos, very helpful & informative. One suggestion, if possible, would be to link any downloadable documents for us to access.
I wish I could mate but the documents are not free
@@tomkatgastraining understood 👍🏼
Number 9 would only be AR if it was not sealed internally and the flue was insecure . If it's just not cemented externally and no products entering then only NCS . Also the meter box one , most boxes of that type have the service and installation pipe work passing through that outer edge of the box but at the bottom, so how is it AR when it's at the top? . Are you suggesting there is a pathway for gas to enter the building when it passes through the top but not if it passes through the bottom as normal? This would be AR if it passes through the back of the box and not sealed allowing gas to potentially pass into the property .keep up the good work with these videos ,great resource for trainee's .
Number 9 is AR as the flue is not sealed and products of combustion could enter the cavity and the meter box one is AR as the integrity of the box is broken so it’s classed as like the door is missing.
If in doubt... ID it and put it right...!!
If it’s ID and riddor you will still need to report the riddor even if you fix it and what if you ID an NCS
funny that some things are considdered worse in the netherlands and some not
I'm no gas engineer but in the thumb nail picture it seems to me that on the flue there should be a grommet to cover the hole to prevent CO ingress. I just took a gander at my boiler and there's no hole there at all. My service engineer puts the gas probe in the sampling port above when serving my boiler.
14 looks as if it has some spillage, am I wrong?
Yep
@tomkatgastraining yep as I am wrong? Or yep I am right?
@@mohana.6185 wrong
As a non RGI - What's ID? I understand RIDDOR. (I got several right).
Is it Immediately Disconnect ?
Close immediately dangerous 👍🏻
Can't go with no.10! You can't ID and RIDDOR work that hasn't even been carried out. And what idiot would install it then RIDDOR their own work?
Don’t get you number 10 is the boiler that a builder has removed the walls around the boiler and is holding it up with wood and then has used a bit of rainwater pipe as a flue extensions. So you find the boiler the way of the picture so how’s that not ID and riddor
@@tomkatgastraining
Yes I do now mate. Sorry.Totally got the wrong end stick. Sorry to hear your not doing the quizzes for now. Can't stress the importance of engineers understand IGEM G11 enough. Hope they pay more attention than I obviously did when I'm teaching them🙄