Very cool enhancement. My Sony CFD-S39 looked more complicated for input selection, so I just combined a bluetooth receiver with an FM transmitter (which I had laying around). Now I just tune in my bluetooth source on an FM input frequency. Parts total less than $30 and no modifications necessary.
Very cool, I have an old Bose Ipod docking station, fantastic sound, I found you can order a small bluetooth device that will just sit in the docking part. Its terrible how many of these things get thrown in landfills and some are so well built and sound great. Peace and best wishes from Ireland to you all.
Hello my friend! it's amazing! I was surprised! There is such a technique! It's really amazing! Very useful information! Thank you for sharing! Best regards in the future!
Appreciate your effort, but IMO you could use Bluetooth receiver box and kept it inside the battery box and do the wiring rather than spoiling the tape. Keep it vintage and enjoy pure Analog music. Appologies if my comments offensive.
That Bluetooth module has fm. Why not remove the fm dial section and mount it there? Then the tape would still function. And you could wire the audio into the fm input.
Bhai ji mere pass aisa radio hai kya mai blutooth setvkarwane k bad dono ka upyog kr sakta hu, kahne ka mtlab ki radio and blootooth se gane bhi plese reply bro
Man lijiye ki abhi to mai usse radio sunta hu to blootooth set karwane k bad jo radio bajta hai to wi bajeha to,,aisa nhi na hoga ki blootooth set krne k bad radio upyog me nhi aayenge aisa to nhi na hoga??????????????
Three Ways To Convert Mp3 Bluetooth For Old Radio Cassette Tapes: ua-cam.com/video/z3IRyB3Qvgk/v-deo.html
Very cool enhancement. My Sony CFD-S39 looked more complicated for input selection, so I just combined a bluetooth receiver with an FM transmitter (which I had laying around). Now I just tune in my bluetooth source on an FM input frequency. Parts total less than $30 and no modifications necessary.
Very cool, I have an old Bose Ipod docking station, fantastic sound, I found you can order a small bluetooth device that will just sit in the docking part. Its terrible how many of these things get thrown in landfills and some are so well built and sound great. Peace and best wishes from Ireland to you all.
u can use bt board power supply from motor line...(no need to external supply separetly)
Yes, but it's susceptible to noise
Thats a AWESOME project dude but if it was me i would have changed the speakers also but its still pretty killer what you did
Great! Thanks for sharing. Have a nice day friend! 👍
Nice video. Thank you for the sharing
Very nice video on tape recorder conventluetooth👍
Thanks for watching
Thanks for sharing. Have a happy and healthy New Year, friend! 👍
Instead of using adaptor for 12v you might used 7812 regulator. This could save the space.. otherwise your work was fantastic
Your idea is very correct, but most cassette radios using a common supply will suffer buzz, howl, and hiss, so we have to use a 12-volt adapter.
Yeah I tryed that two times and ground loop cause ot same power supply make sound horrible
That's awesome.
Glad you think so!
Hello my friend! it's amazing! I was surprised! There is such a technique! It's really amazing! Very useful information! Thank you for sharing! Best regards in the future!
Awesome job 👌👍,pls make a video, how to add Bluetooth to National RX-FS400 tnx
nice g zabardast g bhi mujhy isi ka oxs led lagane ka bata den
GOOD USEFUL PROJECT 🙏
Thank you
அருமை சார்
Thank you
Big like 👍👍
Thanks for the visit
Good job👍🏻👍🏻👍🏻👍🏻
Thanks! 😃
Great job I rather keep it most original as possible unless the tape deck can't save it
That's a great idea!
❤Great job bro👍
Thank you so much 😀
Thank you for sharing.
My pleasure!
Parabéns muito bom bom
Thank you very much
Neat work but not simple to understand because of lack of voice over(try to make with voice next video) congratulations....
Ok. Thanks
Awesome👏
Thanks 🤗
Appreciate your effort, but IMO you could use Bluetooth receiver box and kept it inside the battery box and do the wiring rather than spoiling the tape. Keep it vintage and enjoy pure Analog music. Appologies if my comments offensive.
Good tip!
That Bluetooth module has fm. Why not remove the fm dial section and mount it there? Then the tape would still function. And you could wire the audio into the fm input.
@@branhicks I would rather not disturb the stock system for a shit low res Bluetooth
Wonderful!😊
Thank you! 😊
Hello friend, the project is really cool. What is the number of the IC ? I would like to better understand the details.
You will see the ic number in the video, Thanks
Mere pass b same yahi tape para h
Lekin ap please ek video banae
Isi ke board se amplifier kaise banana h.
Plz its a request
आप के वीडियो का इंतजार रहेगा
added one of that bt face and now it’s buzzing and really annoying esp when playing music on low volume. how can i fix that
Please supply a separate power adapter for the Bluetooth circuit board! Good luck
Странно, зачем делать 100 +-? И пипииииииипиииииипии и и
Hola de dónde sos??
Bhai aap kaha se ho
Bro will the radio work after this
Please give a reply 🙏
Yes, the radio is still working properly!
عمل جميل شكرا لمجهودك
Can use this tape cassette with aux 🤔
I have same product.
Plzz tell me how i convert it into a amplifier.
I want to buy this tape recorder.... Can I ?
I'm sorry, the recorder is no longer available
After Tape recorder still working?
not use cassette tapes anymore!
С унч класса АБ у этого усб мп3 модуля конфликт. Он шумит. Видимо не годится он для старья?
Bhai ji mere pass aisa radio hai kya mai blutooth setvkarwane k bad dono ka upyog kr sakta hu, kahne ka mtlab ki radio and blootooth se gane bhi plese reply bro
Man lijiye ki abhi to mai usse radio sunta hu to blootooth set karwane k bad jo radio bajta hai to wi bajeha to,,aisa nhi na hoga ki blootooth set krne k bad radio upyog me nhi aayenge aisa to nhi na hoga??????????????
Bro add woofer in this tape recorder
Ok I will
Como faço pra colocar em modo pareamento ??
12:27 Using the on-off switch
आसान तरीका में यही वीडियो बनाओं
Another way is to use a car casette adaptor to play an mp3 player through it.
👍👍
Thanks
Add battry place chargeable
Yes, thank you
Music time 12:48??
I can't find the screw of same tape in the holes.
मेरे को भी आप जैसा बनाना है कैसे ठीक होगा
Where did you take 5v for USB player?🙄
5v from the adapter for add on
Sar yah kisat typ Kahan milige
Yahaan: amzn.to/36vUmC3
Simple me bataiye
Sir circut picture please
Modifed RCA ADAPTER INPUT AND OUTPUT
ഇതുപോലെ എനിക്കൊരു നാലു റേഡിയോ സെറ്റ് ഉണ്ട് ഒന്ന് സെറ്റ് ചെയ്തു തരുമോ ബ്ലൂടൂത്ത്
👍
link for decoder board
www.amazon.com/Bluetooth-Decoding-Golden-Li-Appliances/dp/B07SN1PFYC
thanks
मेरा भी सेम मॉडल है
If you have a similar cassette model, try following the video
Is it really works 😢
Mere ko bhi thik karvana hai
Liiii❤️❤️❤️( 128 )❤️❤️❤️iiiike
Deberia llamarse el video como arruinae una reliquia de radio grabadora
Hiiii
Same yahi
उसका मोबाइल नंबर ऑनलाइन में रेडियो खरीद चले
आपका पता क्या है
túl bonyolult, annyit nem ér
Modifed DC12V and Antenna
Cheap mp3 speaker