Hi i have ford Ranger XLT 2014 4X2 The problem is i replace the original hallogen bulb with Novsight N60Led lights 200w at first it goes well after fews days high and low went out. I tried to reset it with scanner after few days it went out again
I had the problem with a burned bulb on the driver side. I changed the bulb but still did not work on low beam, only high beam. Went to service and while trying to delete the low beam error and do resets, they also broke the oposite side low beam, so now low beam is not working on both sides and the errors can;t be deleted. Rest of lights works, high beam, positions, projectors, signals.
@@Gringonaroca the problem went worse, and all the dashboard lights started to flash on random times and the engine would stop. I solved it by replacing the BCM unit at the service (~900 eur, parts + labor)
Very worthwhile knowing thanks. Sure is hot mate gotta be better than the pissing rain n cold though.
Yes very helpful info ...thanks for sharing ,👍
FET field effect transistor works similar way to standard transistor
Hi, do you know if it’s the same on a 2014 transit custom and if the FET can be reset using forscan?
Good info 👍
Hi i have ford Ranger XLT 2014 4X2
The problem is i replace the original hallogen bulb with Novsight N60Led lights 200w at first it goes well after fews days high and low went out. I tried to reset it with scanner after few days it went out again
I had the problem with a burned bulb on the driver side. I changed the bulb but still did not work on low beam, only high beam.
Went to service and while trying to delete the low beam error and do resets, they also broke the oposite side low beam, so now low beam is not working on both sides and the errors can;t be deleted.
Rest of lights works, high beam, positions, projectors, signals.
I’ve had one with no low beams and the reset procedure did not work. New bcm was required
@@mrautoservices7354hi, do you know if the same can be done on a 2014 transit custom? And can it be reset with forscan?
Could you solve the problem? I have the same issue
@@Gringonaroca the problem went worse, and all the dashboard lights started to flash on random times and the engine would stop.
I solved it by replacing the BCM unit at the service (~900 eur, parts + labor)
nice one thanks
Hi, Which Topdon device did you use?
Topdon X link, The link is in my most recent videos
Cheerd
@@mrautoservices7354 Hi, Thx.
Does Phoenix plus also know this function? I'm thinking about buying...
@@mrautoservices7354 Hi, thanks. The video shows Phoenix Plus, right? The Xlink looks different from what I've seen.
@@Smith1000R Sorry this one shows the plus yes, My newer video on the same vehicle uses the phoenix x link
@@mrautoservices7354 Are you not selling your phoenix plus device? :)