Precedent Brake Light Wiring
Вставка
- Опубліковано 27 сер 2024
- Precedent Brake Light Wiring
Ebay Store:
www.ebay.com/s...
Comment Below If You Have Any Questions
Please Subscribe!
website :
waynesgolfcarts.com
Wayne's Golf Cart Service
(760) 393-1314
waynesgolfcartservice@gmail.com
Perfect! After 1 hour of scratching my head, I watched this and was done in 5 min. Thank you !!
Very nice!
Thank you so much for this video. I was just installing this kit and the wiring instructions that it came with are horrible. I haven’t hooked my turn signals up yet so I’m glad you mentioned in the comments it want work without them. Thanks again.
Thanks so much for this video. My kit didn’t even come with instructions! By following this video I was able to have my switch working flawlessly in 20 minutes.
Nice, glad it helped!
Another terrific helpful video. Thanks.
Love your videos, Wayne! I know this is an older one, but hopefully you'll see this question: How do you electrically test the brake light timer to see if it's good?
You feed it with 12 volts, and if it is pushing volts thru it, watch it and see if the volts leaving it, stop after either 3 or 5 minutes.
Great video!! Saved me a huge headache!!!
Nice. Glad to hear it.👍
@@waynemartin.waynesgolfcart4900 What did you do with the old bucket harness? Tuck it behind the batteries or completely remove it?
Not understanding you?
Do you have an existing bucket harness that you do not use?
@@waynemartin.waynesgolfcart4900 I have the bucket harness that was originally installed. It ran up to the front and I have run a new harness from the front to the batteries essentially disconnecting the old one from the front dash. That old harness still has the wires for the forward/reverse switch within it.
If you got everything to work, then good for you👍
The brake lights will not work without the turn signals, normally.
There is a way to wire the brake lights without the turn signals, but it involves a bunch of wiring.
Alot easier to get the turn signal kit.
Im having the same problem
Just bought a kit like this, and instructions were HORRIBLE. Thank you Wayne, as always, you're spot on! However, upon further inspection, I do not have the bucket connectors or 'jumpers' in my packaging. I have a 'timer', and the circuit (with 2 spade connections). I saw one video where someone just connected the plug to the timer and one spade connector from the bucket harness... May need some clarity.
Your kit did not include the short wires that hook the timer to the spring switch? Usually when they ship them, they hook all the short wires together, but you need to pull them all apart, because they don't go together.
@@waynemartin.waynesgolfcart4900 Good CALL! Yes, you're correct. Checked those and yep, there were included just hooked together.
👏👍
Thank you Mr Wayne
👍
i did the exact brake light on my club precedent cart wired exactly like you did, doesn't work but i tested the red positive lead from gulg cart and i do not have power there, checked 2 fuses that i found under seat, is there another fuse somewhere that would feed that red wire?
You need yo tie the blue wire and the green wire together, that are in the dash area.
Wayne Thank you so much.
yes sir 👍
My brake lights stopped working. My turn signals and hazard warning work fine. This appears to be the kit I have and all connections under the floor test OK for continuity and voltage, the switch works as it should. I can't get the lights to light by bypassing the switch or the timer. I'm at a loss.
I bet your tail lites are fried, it's pretty common on precedent lites if they worked at one time.
@@waynemartin.waynesgolfcart4900 Aren't they the same lights for the brake, turn signal and 4 way flashers?
Part is part is not
Wayne, 2006 Precedent with deluxe light kit from Golfcart stuff. Everything working except the brake lights? My wire colors are red, yellow and black with white stripe. Everything hooked up per diagram. Oh med breaker and plunger, all good? How can I troubleshoot to bypass the relay, plunger and breaker? Thanks.
You need turn signals in order to have brake lites. So make sure you installed that relay behind the dash, the one with the green wire.
Yep, have turn signals and flashers and they work fine??@@waynemartin.waynesgolfcart4900
Ok ..
Hooked up correctly.. I have tail lights and no brake lights .. any ideas?
How about some info?
What year and model cart? Just because you have tail lites, doesn't mean you also have brake lites.
Brake lites are an add on.
Whatever you are talking about, my guess is your cart does not even have brake lites.
Thankyou my friend !!
Do have to replace the entire timer switch if the brake lights are not timing out? Is there a way to by pass the timer switch so brake lights work normally? Your video is excellent , learned quite a bit from it
Do you not want the timer on the system,?
@@waynemartin.waynesgolfcart4900 I really dont need the timer so I would just like to by pass the time and just have brake lights. hoping that would be the cheaper way out.
I'm traveling right now, don't have access to my notes, but try pulling the 2 wires off the timer unit ( Not the black wire that goes to the negative terminal) and tie those 2 wires together, and see if that works for what you are trying to accomplish.
Let me know what happens.
will the brake light switch work without having the turn signal portion? i have the floor mounted brake switch, led front and rear lights with full aftermarket bucket harness
My brake lights stopped working. All the other lights horn and directionals are working. Where is the fuse located for the brake lights? BTW I have a 2016 Club Car Precedent. Thanks 😊
Neither brake lite works? What about tail lites?
I found a 10 amp fuse connected to the brake pedal rod under the floorboard in the cab. It is not blown and I’m getting voltage to the switch when I depress the brake pedal but still no brake lights. All the other lights are working fine. Where do I go from here? 2016 precedent.
I need to know, are the tail lites working?
Do you have the plastic brake pad that screws on top of the brake pedal?
See if the relay behind the dash is good.
Yes the tail lights are working.
See if you have 12 volts to and thru the brake pedal switch, if not work back to the relay behind the dash.
Hi there! Thanks for this vid. I was going to replace a tail light but the wiring is a spade and the new light has a plug. Do I need to replace the whole bucket harness?
no! The only thing you need to do, is cut off the 3 wire plug from the tail lite, and either crimp on what ever terminals that will mate with the terminals on your harness.
@@waynemartin.waynesgolfcart4900 Thanks!!
👍
Thanks for the video. I have a 2017 48v precedent that has the light kit installed. I want to get the upgrade to have blinkers and brake lights. What kit would you suggest to buy to do that? There is a bucket harness already installed so by wiring the upgrade kit into it do I have to worry about doing anything with a voltage reducer? Thanks
No, you already have a reducer, you just plug and play eveything.
I think i have those kits for maybe 100 bucks ?
@@waynemartin.waynesgolfcart4900 thanks. What brand do you suggest?
Doesn't matter, most are the same
Hi Wayne, I've followed your directions and can't get the brake lights working. I have turn signals, running lights, but brake lights will not work. We have triple checked the wiring as you describe. We cannot confirm that the brakes are getting power. I've read that maybe the green and blue extra wires need to be connected to complete the circuit. Is this your experience??
What kind of cart? Precedent?
Did you install a kit with turn signals and also the relay in the dash, and the parts in the floor ?
Thanks. Does the factory harness on a PQ 09 come with the wires that you used to put in the timer?
I believe it does, it's easy to check, just open the floor hatch and see if the 3 wires are laying in there loose.
What is the big relay for? The kit I received today had me stuck exactly where you are at in the video.
Instructions were garbage. It even said to go to a different section for gas carts and there was no section for gas carts.
I have the exact same parts you are showing but I'm wondering now if that relay is for the electric carts.
My 2012 precedent gas already had a basic light kit installed.
Since you did not buy anything from me, i will have to guess at exactly what you are referring to.
The kit you say you received, are you talking about a kit of parts for fixing a charger? Or some kit that has something to do with lights?
I am confused because if you already have lights, then did you get another kit?
I only work on and sell parts for Electric Golf Carts.
There are only 2 relays that i talk about, 1 relay is for the brake lites and the other relay is to activate accessories or reducers with the key switch.
is there a way to reduce the brake light on time? They stay on more than 2 minutes. If not just taking timer out of the circuit would only put brake lights on when the brake is depressed fully; Correct?
Cannot vary whatever time is programmed into the timer.
Yes you can remove it and wire it so only works when foot is on pedal.
Are any of the club cars pre wired to add lights?
The earlier precedents did come with a bucket harness installed. The bucket harness has all the wires for the tail lites, but you still need a basic lite kit for headlites.
@@waynemartin.waynesgolfcart4900 Thank you!!
Hello Wayne, great vid. I have a 2004 Yamaha G22A. My wire harness wires are Black, White and Red. Will my White wire be the same as the Orange Wire on your Precedent Harness? If not would it be the Red or Black instead?
what part of the harness are you asking about?
@@waynemartin.waynesgolfcart4900 For the break light switch and timer portion of my harness. On your video, you are showing black, orange and red wires, mine are black, white and red. Can you help me with this dilemma? Also, I have an after market LED light kit with turn signals and break lights. this causes me to now have two different ignition harness sockets. should I splice or combine the two harnesses together so that I am able to plug them in to my ignition switch. Thank in advance
you might be ok with those 3 wires, as you are thinking for the brake switch.
I don't know about splicing 2 harnesses together, that doesn't sound like a good idea.
Not sure why you are working with 2 harnesses?
The Yamaha harness pretty much has never changed.
Did you buy a generic kit, and are trying to splice that into the factory wiring?
@@waynemartin.waynesgolfcart4900 Thank you for the quick response back Wayne, I really appreciate it. This was supposed to be a deluxe lighting kit, turns out, it is anything but deluxe. It is a LED lighting kit, so it only had wires to operate the lights and switch along with the turn signals and brake timer switch. So this is it's own harness. I still need the original harness to operate everything else. I stripped out all of the wiring from the original harness related to the lights. The color code is the same for the ignition switch to the harnesses.
Is your cart gas or electric?
Hey there Wayne,I had another question about the 82 Club Car DS that you identified for me after my misidentification of it. I was wondering if the body styles have changed much from 82 to 94? I've been wanting to put fender skirts on it because of the roughness around the back wheel wells,it looks as though someone cut the back wells out a bit and might have done it while blindfolded. I have found them for 94 and up but does not seem to be much for carts as old as mine but I bought what I could afford,just wat to spruce it up a bit!
There is only 2 basic styles of club cars, DS, or Precedent.
All years of ds, have the same body style. There are only 2 headlites that fit the ds bodies.
@@waynemartin.waynesgolfcart4900 I was probably going to go with a universal light kit at some point ! The fender flares were a bit of a concern but after looking at pictures of of 80's through 90's carts I think I figured out which ones to get,thanks again!
Hi Wayne, thanks for the video. I have a 2005 club car precedent and I purchased an aftermarket head light/brake light kit from someone on Ebay and mines didn't come with a timer and breaker it only came with the switch with spring my question is do I need it to work the brake light? I tried connecting the switch to the two red and tan/brown wires in the harness and it doesn't seem to work the brake light 🤷♂️ your help would be appreciated 🙂
I have not seen a light kit that you can only get lights and brake lights.
Most basic kits have headlights and tail lights, then you can get a deluxe kit that adds horn, brake lights and turn signals.
I don't follow you about those wires in the harness, where in the harness are they?
If you can text me a picture of your parts and the instructions that came with this kit , it will help.
@@waynemartin.waynesgolfcart4900 sorry yes that's what I have my kit has horn taillights headlights and turn signals
@@waynemartin.waynesgolfcart4900 my kit didn't come with the timer and breaker that you show in your video. How can I get it or how can I get my brake to light up when I step on the brake pedal?
You should have got all the parts, o know the kits I sell have all the parts.
Also, if all you are missing is the timer, then the brake lites should work ok. they just will go off when you release the pedal.
@@waynemartin.waynesgolfcart4900 if that's the case I must have a bad switch or my wires are not getting power. I'll try and diagnose it. Thanks for your help 👍🤙
I have no power in red wire. Should there be? If so, what voltage?
I have no idea of which of the 20 different red wires you are asking about?
What year and model of cart do you have? Which red wire are you asking about,?
What is or is not happening?
An electric wiring harness light kit on a Club Car president why would you get 12 volts going through the front lights and only 7.8 balls going to the back
You should have 12 volts to all lites.
I would look for a bad connection or a wire that has swollen up from corrosion.
Where can I purchase these parts?
If you are looking for light kits, I have them on my website. If you only are looking for the brake plunger part, redhawk is the only place that has those.
@@waynemartin.waynesgolfcart4900 Thank you