LOGO! Analog basics 1 | Siemens PLC programming
Вставка
- Опубліковано 11 лип 2024
- The LOGO! basic module has four 0 - 10 V analog inputs. This video shows how to set gain and offset for 0 - 10 V signals and how to give low-level warnings using Message Text.
0:00 - Intro
1:16 - Example 1: Simple 0 - 10 V for 750 litre tank
4:32 - Example 2: 1.5 V to 7.5 V for 750 litre tank
4:57 - Calculating gain and offset
6:06 - LOGO! program checking the analog amplifier
7:24 - Adding the low-level warning
8:55 - Adding the sensor error message
11:23 - Recap
Check out the playlists for more videos on the LOGO! hardware and software.
very good tutorial.Thank you very much
Excellent, thanks once again.
Excellent videos! Thanks for taking your time to make theses videos that have helped my learning curve greatly
Excellent thank you keep up great work
Very Good.
Hello. Thank you for the video! Tell me, what program did you use to simulate the capacity and dial gauges?
I used Inductive Automation's Ignition system. The Perspective module is designed for browser applications. The full software is expensive but you can use the two-hour trial mode indefinitely (with a manual reset) or use the free Maker edition. They have an Inductive University with online training. I'm hoping to make a video of using Ignition as a HMI for the LOGO! I'm glad you liked it.
Thank you for your feedback! I really liked your videos, although I haven’t watched the whole playlist yet. I will get acquainted with the program! Thank you!