Garmin Echomap Fish Finder Kayak Install - Mount - Power - All Sizes
Вставка
- Опубліковано 7 лип 2024
- The Garmin Echomap Series Fish Finders are a game-changer, providing you with all the tools you need to enhance your fishing experience.
Join me as I take you through a step-by-step guide on how to install, mount, and power the Garmin Echomap Fish Finder on your kayak. I got you covered with detailed instructions and tips to make the process seamless and efficient.
As always, reach out with any questions, Daren
**BECOME A CHANNEL MEMBER**
🔥- Benefits Here: / @wendellfishing
This video is NOT sponsored. Some product links are affiliate links which means if you buy something I'll receive a small commission at no extra cost to you. Thank You!
**GEAR REFERENCED**
Garmin UHD 92sv: geni.us/GarminEchomap92SV (Amazon)
Yak Attack Fish Finder Mount: geni.us/FishFinderMount (Amazon)
Nocqua Pro Battery Kit: geni.us/Nocqua10Ah (Amazon)
Solder Kit: geni.us/SolderKit (Amazon)
Wirefly Shrink Tubing Kit: geni.us/ShrinkTube (Amazon)
YakAttack Cell Block: geni.us/YakAttackCellBlock (Amazon)
YakAttack Switchblade: geni.us/YakAttackSwitchblade (Amazon)
**VIDEOS REFERENCED**
Bonafide P127 Walk Through: • Fishing Kayak Setup Id...
**KAYAK FISHING OBSESSED (KFO SHOW) PODCAST**
🎙️ - Apple Podcast: apple.co/3IRFBKl
🎙️ - Spotify: anchor.fm/wendellfishing
**TOP 5 VIDEOS**
🎣 - 9 Beginner Kayak Fishing Mistakes I Made… And You Should Avoid!: • 9 Beginner Kayak Fishi...
🏪 - 19 Walmart Kayak Fishing Gear Hacks (Not Found in the Fishing Aisle): • 19 Walmart Kayak Fishi...
😡 - Why People Hate Kayak Fishing: • Why People Hate Kayak ...
🔥 - Fishing Kayak Setup: • FISHING KAYAK SETUP! -...
🎣 - Ultimate DIY Kayak Crate With Rod Holders: • The Ultimate DIY KAYAK...
**KAYAK FISHING OBSESSED (KFO SHOW) LIVE SHOW**
📺 - www.youtube.com/@wendellfishi...
**KAYAK CAMERA GEAR USED**
💣 - YakAttack Boomstick Pro: geni.us/YakAttackBoomstick (Amazon)
📸 - GoPro 8 Black: geni.us/Go_Pro_8 (Amazon)
🎙️ - Rode Mic: geni.us/Rode_Mic (Amazon)
📷 - Gopro Chest Mount: geni.us/ChestMountHarness (Amazon)
**SOCIALS**
👍 - Facebook: / wendellfishing
🤍 - Insta: / wendellfishing
🕦 - TikTok: / wendellfishing
💻 - Website: www.WendellFishing.com
#wendellfishing
**TIMESTAMPS**
0:00 How to Install a Garmin Echomap UHD 92SV On Your Kayak
0:20 What Included and What's NOT Included
1:05 Connect Yak Attack Mount to Echomap Base
2:19 Attach Transducer Mount to GT56 Transducer
4:50 What You Don't Need Out of The Garmin Box
5:26 How to Power Your Garmin Echomap (Wiring)
6:25 Wire Connection Between Power Source & Garmin Echomap (Amp Hours Needed)
10:56 How to Mount a Garmin Echomap to a Kayak
12:06 How to Mount Garmin Transducer to Kayak (3 options)
13:38 Option #1 For Mounting Fish Finder Transducer to Kayak
14:07 Option #1 For Mounting Fish Finder Transducer to Kayak
14:44 How to Connect Transducer Cable to "Sonar" on back of Garmin Echomap
16:05 Should You Use Ferrite Beads on Garmin Echomap Fish Finder? - Спорт
Another amazing video Wendell!
Thank you so much for this one!
😎👍🏻
Thanks boss. Appreciate it a ton!
sick video! just installed a garmin 93sv and panoptix system into my kayak the other day, its a game changer!
You aren't messing around
I’m so ready to add a garmin to my kayak! I think I’m going to start with a Striker 4 but it will make such a difference just knowing the depth!
Big facts there brother !
The two piece nuts are awesome. I would rather drill a 1/2 hole in a boat then a 1". Good video
You must be running it on a bass boat... for those who aren't running it through 15 feet of hull, I expected more than the cheap plastic solution they provided on a $1K Unit.
Great install Darren. I did purchase the naqqua from a prev vids, and i love that battery. Four years ago i purchased my striker 4. It's good for learning, and depth. Especially for my pdl drive, and my Bixpy. I do love that upgrade, because it's live scope compatible. I Can't wait to see future vids on you using it. 💯 🎣 🛶
Thanks boss.. I always appreciate your comment brother!
Thank you, thank you, thank you, you are the bestest. LOL thank you so much for taking the time to explain this in everyday language stay safe out there sir
Happy to help!
Thanks for such a detailed video on the installation, i might go that route next season.
Glad it was helpful brother!
Great content, upgrading my lowrance split shot, this helps
Right on!
Great video, thanks for posting. I have a native slayer and considering a Garmin setup with panoptix and your videos provide a good step by step walkthrough.
Awesome, thank you!
I'm using yak power that also has an inline fuse. Can I eliminate the one that came with the Garmin ECHOMAP or can both fuses be used?
For sodering, You should tin the wires first before connecting them together
The cell block isn’t that big. It will hold a 12v 10ah battery and the whole purpose of it is to not drill holes in your yak if you don’t want. It also makes it so you can take your rig off and put it on another one without install and deconstruction.
does the transducer arm mount that comes with the garmin connect to the yakattack switchblade?
Great video! One question. You mounted the transducer flush with the boat. Does the transducer not need to be mounted lower than the hull for the side scan to work properly? It wont interfere with side scan ability mounted like that?
I wondered the same thing.. no issues
Awesome, good to hear! I was originally going to use a switchblade for my transducer because I car top my kayak so didn't want to be banging the transducer around if it was mounted below the hull but now I will try to flush mount it. Thanks!@@wendellfishing
That clip on threaded part on the unit end of the transducer cable isnt dumb!!! Its brilliant! You only think its dumb because you have not tried to run all that cable thru the hull of a bass boat! But not putting the normal threaded nut on the end it makes it much easier to fish your cable thru the hull of a full blown bass rig.
Couple reasons I still think it's dumb. You would only be saving 1/8th inch. 2: For someone who may be putting it on something other than a bass boat, it's a really cheap design on a $1K unit. 3: Not intuitive for install. A waterproof click connect makes more sense to me than the cheap plastic connector they made.
@@wendellfishing Guess we will just disagree then.
I just started soldiering my wire connections, tired of power problems. Haven't got to uses it but "Helping Hands with LED Lights" from Harbor Freight $6
There ya go
Question for you. I heard for sidescan to work properly in a yak the transducer has to hang out a little from the hull. I have a Native Slayer and it’s a heavy beast and always hitting gravel so I went with a side mounted transducer mount. I would prefer to mount it like how you did, and now that you have had time you experiment have you made any adjustments to the mount or good to go? Also I just bought the Garmin 93SV and also thought the sonar plug was ridiculous and glad I am not the only one to think so.
Hey Boss.. I have had no issue and it reads great on my P127. Glad I'm not the only one that things there should have been a better solution than what I was looking at.. especially for the $$$
Can the transducer be mounted on the inside hull of the kayak along the bottom instead of having to run it to the bottom? I have a Ocean Kayak scrambler that I use for salt and fresh water fishing. Primarily, its used for deploying shark baits and kayaking them out thru the surf and dropping them a few hundred yards offshore. Because Im running thru surf, I want something that can stay on the inside of the yak and be secured when not being used for the fish finder.
I have read it was possible but I have never tried through the hull transducing. Doesn't make sense that it would but never tried it so I don't know for sure.
I just bought the 7-in version myself, I'm curious if you have any ideas how to do a center mount on a autopilot 136?. I feel like I would much rather have the screen directly in front of me as opposed to my left or right side. I wondered if you had any kind of ideas? I thought about mounting some sort of pole in front of me using the gear tracks and maybe attaching with robo grips? Any help would be appreciated
@fishin with gramps has an autopilot.. he may be able to help
Question. With mounting the transducer under the kayak, is there enough clearance from the hull for side imaging to work properly? I have a slayer max 10 and am thinking of getting the same electronics. Deciding between using the switchblade or going with the mounting area that's already there. Awesome video btw!
Works like a charm.. I thought the same but no issues
I’m trying to have as clean a set up as possible. So I have a NuCanoe unlimited and I’m thinking about running the battery and transducer (using that puddy method) inside the rear internal storage. And then run the wires up thru the yak and out the gear plate next to the seat. Anyone have any thoughts or advice
I have yet to use the putty method but I have read (like you) that it is supposed to work. Eveything else makes sense to me. The tranducer plug would be a pretty big hole.
Are you getting along without the ferrite beads.
Yes… no issues
great videos. regarding your echomap instalation, the way you mounted your ducer, is it reading sidescan? seems u have put it flash with the hull.
It actually reads no problem
@@wendellfishing can I ask you that, from your experience are there any kayaks which the ducer frequency can sidescan through the plastic and some kayaks don’t? Or, the ducer always must prochude little bit under the hull to work sidescan? Thanks
@@SpicyAngler Hey Boss, Side Imaging transducers have beams that shoot out to the side of the transducer therefore they cannot be epoxied into the hull and work properly.
@@wendellfishing thanks for reply I appreciate it. I didn’t mean to apoxy it inside I have a transducer scupper place under the hull but if I put it in a protected manner and it doesn’t prochude a bit under and expose (then also can damaged) would it possible work?
Have you verified the hours of use of that 10 ah battery on the 93sv?
I have never done a test.. But I will last me 2.5 morning at about 4 hours a morning.. so around 10 hours ish
Whats the point of the transducer puck,?
Just what I called the transducer mount. Nothing special. Just what came standard on the boat
Pssst, the flat side (upper) side of the transducer must be even with the lowest part of the hull!
Where are you mounting your keyboard for that thing??!!
Right in between where you lost the Knuklhed to me this month :) HEYOOO!
I’ll be nice. Your soldering sucks bro. You heat the wire until the solder melts at the touch.
Not the other way around. Lol other than that, great video!
Good thing I don't solder for a living!
@@wendellfishing lol yes!
Your soldering skills need some work lol. Having a clean tip on your iron is key. Keep the tip clean by wiping it on a wet sponge.
They sure do!